Skip to content

Collection of procedures and optimizations to Padavan Firmware.

Notifications You must be signed in to change notification settings

ciro-mota/padavan-collection

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

43 Commits
 
 
 
 
 
 
 
 
 
 

Repository files navigation

🇧🇷 Português

Procedures and otimizations to Padavan Firmware Router

License Shell Script

Warning

If your device supports OpenWrt you should really consider installing it over Padavan. Padavan is built on a very old version of the Linux Kernel and has had little support from community developers over the last few years, in addition to already having obsolete packages such as ZeroTier. By migrating to OpenWrt you will be supported by good documentation, periodic updates and great community support.

Purpose

This Git brings together some procedures that can be used to get the best out of Padavan Firmware. These are procedures publicly disclosed in the 4pda community, Wiki and adapted for use.

Tip

For the procedures below to work optimally, the firmware must be compiled on Prometheus with the following options enabled:

CONFIG_FIRMWARE_INCLUDE_OPENSSL_EXE=y
CONFIG_FIRMWARE_INCLUDE_OPENSSL_EC=y

Note

All these procedures have been tested and used in a Xiaomi Mi Router 3G, being compatible with the Xiaomi Mi Router 3. However, it is possible that they can be applied in other models supported by this firmware.

Table of Contents

  1. Build your own firmware from source
  2. Using old method with Prometheus and Docker
  3. Enable internal Entware
  4. Integrated AdBlock
  5. DNS Over HTTPS
  6. HTTPS local domain
  7. LEDs Control
  8. Scheduled Reboot
  9. Telegram Alerts
  10. ZeroTier
  11. Padarouter

Build your own firmware from source

This procedure aims to build Padavan updates from sources that are not available in the Prometheus script. This procedure can be used with any other Padavan Git repository.

We will use a Docker Container for convenience, but you can also use a virtual machine. With Ubuntu 22.04, it only has to be checked if the dependency packages are installed/updated.

- Start Container

docker container run -it ubuntu

- Update, Upgrade and Install Packages

apt update && apt upgrade -y && apt -y install gnutls-bin nano autoconf autoconf-archive automake autopoint bison build-essential ca-certificates cmake cpio curl doxygen fakeroot flex gawk gettext git gperf help2man kmod libtool pkg-config zlib1g-dev libgmp3-dev libmpc-dev libmpfr-dev libblkid-dev libjpeg-dev libsqlite3-dev libexif-dev libid3tag0-dev libogg-dev libvorbis-dev libflac-dev libc-ares-dev libcurl4-openssl-dev libdevmapper-dev libev-dev libevent-dev libkeyutils-dev libmpc-dev libmpfr-dev libsqlite3-dev libssl-dev libtool libudev-dev libxml2-dev libncurses5-dev libltdl-dev libtool-bin locales nano netcat pkg-config ppp-dev python3 python3-docutils texinfo unzip uuid uuid-dev wget xxd zlib1g-dev

- Clone Repo

git clone https://gitlab.com/hadzhioglu/padavan-ng.git

If you receive the following error:

error: RPC failed; curl 56 GnuTLS recv error (-9): Error decoding the received TLS packet. error: 55553 bytes of body are still expected fetch-pack: unexpected disconnect while reading sideband packet fatal: early EOF fatal: fetch-pack: invalid index-pack output

Re-clone the repo or adjust the global parameter as follows:

git config --global http.postBuffer 1048576000

- Set Fakeroot

update-alternatives --set fakeroot /usr/bin/fakeroot-tcp 2>/dev/null

- Build Toolchain

cd /padavan-ng/toolchain
./clean_sources.sh 
./build_toolchain.sh

- Copy model board and edit config

Replace with your router model.

cd ../trunk
cp configs/templates/xiaomi/mi-r3g.config .config
nano .config

- Enable Configs

This step is similar to what happens with the Prometheus script and where you will have to enable or disable the settings you want.

CONFIG_FIRMWARE_INCLUDE_OPENSSL_EXE=y
CONFIG_FIRMWARE_INCLUDE_OPENSSL_EC=y

- Build Firmware

./clear_tree.sh 
./build_firmware.sh

- Copy firmware from container to Host

for file in $(docker exec $(docker container ls -a | grep -e 'ubuntu:latest' | grep -e 'Up' | awk '{print $1}') sh -c "ls padavan-ng/trunk/images/*.trx"); do
        docker cp $(docker container ls -a | grep -e 'ubuntu:latest' | grep -e 'Up' | awk '{print $1}'):${file} $HOME
done

(back to top)

Using old method with Prometheus and Docker

You can use the Prometheus script mounted under a Docker Container to generate older firmware images. Just download the attached Dockerfile in this Git, build and run.

docker imagem build -t prometheus /path/to/Dockerfile
docker container run -it --name prometheus <containerID>

(back to top)

Enable Internal Entware

Internal Entware makes use of a small space in the router's internal memory where programs can be installed and some files saved, without the need for an external USB drive. Very useful for installing applications not included in the standard firmware build.

For the procedure, it is necessary to determine the number of the "RWFS" partition that has the free space.

  1. To do this, in an SSH session on the terminal, type the command cat /proc/mtd and look at the list of partitions. You will see something like: mtd11: 06080000 00020000 "RWFS"

  1. Format this RWFS partition with UBIFS, type the command to that: ubiformat /dev/mtd11

  2. Then we add the set of command lines below for your activation on the firmware interface, on Advanced Settings » Customization » Scripts » Run After Router Started::

## Enable Internal Entware
ubiattach -p /dev/mtd11
ubimkvol /dev/ubi0 -m -N user
mkdir /mnt/opt
mount -t ubifs ubi0 /mnt/opt
opt-mount.sh /dev/ubi0 /mnt
opkg.sh

Apply and restart the router after that.

4 - We were able to verify that everything worked out by running the command: opkg update

This is the list of packages available for installation, due to the small size use it with caution.

(back to top)

Integrated AdBlock

Through Internal Entware or through Entware enabled for an external USB drive, we were able to generate a host file containing address block lists, useful for parental control and/or for an internal AdBlock and thus bringing greater security to the local network.

This procedure is not 100% effective and it may still be necessary to use blockers in browsers.

If after your installation some site does not work correctly, add your domain name in the adblock_allow.list file, just the domain name, example: github.com

Other sites that need to be blocked can be added in the adblock_deny.list file, also just the domain name.

In my case, I chose to use the set of lists from the Energized group, which are constantly updated and have many downloadable list options.

  1. Download the contents of the codes/adblock folder from this repository and add it to the router in the /etc/storage folder.

  2. Activate redirection to the new hosts file in: LAN » DHCP Server » Custom Configuration File "dnsmasq.conf". And add these lines below:

### Internal AdBlock
addn-hosts=/tmp/hosts

If necessary, apply execute permissions to the script with chmod u+x adblock_update.sh.

  1. Execute mtd_storage.sh save to save modifications.

  2. You can force the script to run at any time using the command: /etc/storage/adblock_update.sh or ./adblock_update.sh if it is in the same directory as the file.

  3. You may want to create a schedule for automatic update of the lists, for that add the line below with the desired period in Administration » Services » Cron Daemon (Scheduler)? » Scheduler tasks (Crontab):

### Update AdBlock
00 8 * * 6 /etc/storage/adblock_update.sh >/dev/null 2>&1

The update will take place every Sunday at 8:00 am.

(back to top)

DNS Over HTTPS

DNS traffic is usually vulnerable to attackers because there is the possibility of "hearing" your communication and intercepting unprotected personal data. With this Internet service providers can also monitor your traffic and possibly collect everything about the websites you visit.

DoH and DoT are secure DNS protocols that can change this behavior through an encrypted channel. DNS over TLS RFC7858 and DNS over HTTPS RFC8484 are designed to secure DNS traffic. You may want to dig deeper into the subject by reading the RFC's listed here.

Through DNSCrypt proxy it is possible to enable DoT and/or DoH support in this firmware, with more customizable options than the one present in the standard build of the firmware.

  1. Whether on Internal Entware or USB, install the package dnscrypt-proxy2:
opkg update
opkg install dnscrypt-proxy2
  1. In WAN » WAN DNS Settings » Get the DNS Server Address Automatically? set to Disable. In DNS Server 1: put 127.0.0.1. WAN » WAN DNSv6 Settings » Get DNSv6 Servers Automatically? set to Disable too.

  2. The package will then insert the dnscrypt-proxy.toml file into the /opt/etc directory where some edits are needed.

    3.1. In server_names, edit with the DNS servers you want to use. A list of available ones can be found at this link. Example:

    server_names = ['cloudflare', 'cloudflare-ipv6', 'nextdns', 'nextdns-ipv6']
    

    3.2. In listen_addresses change the port to a high port for example. This procedure is optional.

    listen_addresses = ['127.0.0.1:65053']
    

    3.3. Change ipv6_servers to True only if you have active IPv6 connections.

    3.4. Uncomment the line tls_cipher_suite = [52392, 49199], this will cause a low use of resources when using DNSCrypt.

    3.5. fallback_resolver and netprobe_address can be edited to a DNS server of your choice but different from those used in the default configuration (item 3.1).

  3. From an SSH session, run the command /opt/etc/init.d/S09dnscrypt-proxy2 start to enable DNSCrypt.

(back to top)

HTTPS local domain

HTTPs is now the standard for web addresses and Padavan supports this feature, but with a self-signed certificate that is not natively recognized by browsers. To get around this it is possible with the help of Let's Encrypt and a valid DDNS to have its own access address to the router.

There are many DDNS services, free and paid. Specifically in our case it is recommended to use DuckDNS, which allows the creation of a free and accessible DDNS for use with Let's Encrypt.

  1. Enable HTTPs support in Administration » Services » Web Server Protocol.

  2. Change List of Allowed SSL Ciphers for HTTPS: to:

TLS_CHACHA20_POLY1305_SHA256:DH+AESGCM:DH+AES256:DH+AES:DH+3DES:RSA+AES:RSA+3DES:!ADH:!MD5:!DSS
  1. Download the contents of the codes/ca-cert folder from this repository and add it to the router in the /etc/storage folder.

If necessary, apply execute permissions to the script with chmod u+x update-cert.sh.

  1. You need to edit some fields in Variables field, such as your DDNS domain and the token key generated in DuckDNS. The script will need to be modified if another service is used.

You will also need to edit line 12 of the script to point to your WAN interface, in my case I use the PPP protocol and this is referred to as ppp0 in the script. Run ip a s on SSH Terminal to check which interface receives a public IP address.

  1. Execute mtd_storage.sh save to save modifications.

  2. You can force the script to run at any time using the command: /etc/storage/update-cert.sh or ./update-cert.sh if it is in the same directory as the file.

  3. Certificates are valid for 90 days. Due to the permissions gap between acme and the built-in crontab, you will need to manually run this script:

/etc/storage/script-cert.sh

  1. Activate the redirect to the address at LAN » DHCP Server » Custom Configuration File "dnsmasq.conf" with the line below:
### Internal Cert
address=/your-domain.duckdns.org/192.168.0.1

Change to your domain name and router IP address.

(back to top)

LEDs

You may want to control when the router's LEDs can be lit or not. To do this, add a Crontab (Administration » Services » Cron Daemon (Scheduler)? » Scheduler tasks (Crontab)) rule for shutdown:

00 17 * * * leds_front 0
00 17 * * * leds_ether 0
10 17 * * * leds_front 1
10 17 * * * leds_ether 1

0 will represent off and 1 on.

(back to top)

Scheduled Reboot

In case you need to set a scheduled restart of the router, you can use Cron for that. To do this, add a Crontab (Administration » Services » Cron Daemon (Scheduler)? » Scheduler tasks (Crontab)) and add that:

00 06 * * */2 reboot

This will cause the router to restart every other day at 06:00 am. Adjust it to your need.

(back to top)

Telegram Alerts

It is possible to configure custom alerts to be sent to a particular bot on Telegram. Use the method of creating a new bot via @BotFather, have the HTTP API and ChatID to proceed.

  1. Download the contents of the codes/tbot folder from this repository and add it to the router in the /etc/storage folder.

As this is a simple shell script, you are free to enter any changes you want to send an alert. In my case I used the standard for signaling changes in IP addresses.

  1. Change the API_TOKEN= and CHAT_ID= fields to your bot's credentials.

  2. Execute mtd_storage.sh save to save modifications.

  3. Then we add the command line below for your activation on the firmware interface, on Advanced Settings » Customization » Scripts » Run After WAN Up/Down Events:

### Bot Telegram
sleep 30
/etc/storage/tg_say.sh WAN Up, IP: $3

Supported parameters represent:

  • $1 - WAN Action (Rise / Fall).
  • $2 - WAN interface name (for example eth3 or ppp0).
  • $3 - WAN IPv4 address.

(back to top)

ZeroTier

ZeroTier makes it possible to implement VPNs in environments with NAT or behind a firewall where no additional configuration is required, in other words, the router does not need to be exposed through the WAN port to allow external access.

  1. Whether on Internal Entware or USB, install the package zerotier:

Due to malfunctions with newer versions of ZeroTier we must use a slightly older version of the package.

wget https://bin.entware.net/mipselsf-k3.4/archive/zerotier_1.4.6-5_mipsel-3.4.ipk && opkg install zerotier_1.4.6-5_mipsel-3.4.ipk && opkg flag hold zerotier
  1. Run it: zerotier-one -d.

  2. Run the command zerotier-cli info where you will get something like:

200 info <YOU-ID> <ZeroTier Version> ONLINE
  1. Make a brief registration on the site and create your own network segment. You will receive a unique ID for this network.

  2. Connect to the network created with the command and the network ID obtained in the previous step: zerotier-cli join <NETWORK-ID>

  3. Return to the website and in the network settings by clicking on your ID, go to the "Members" section, you will see your router there. You must authorize it by checking the appropriate checkbox, naming is also possible.

  4. Now we add the set of command lines below on the firmware interface, on Advanced Settings » Customization » Scripts » Run After Firewall Rules Restarted::

### ZeroTier Rules
iptables -I INPUT -i <NETWORK-IFACE> -j ACCEPT
iptables -t nat -A PREROUTING -d <ZEROTIER-IP-ADDRESS> -p tcp --dport 443 -j DNAT --to-destination 192.168.1.1:443

Run ip -br a to get the network interface and IP address of the ZeroTier network that was previously configured.

Change from 443 to 80 if you don't use HTTPS access.

  1. Add the command line below for activating the ZeroTier daemon when restarting the router, on Advanced Settings » Customization » Scripts » Run After Router Started::
### ZeroTier
/opt/bin/zerotier-one -d
  1. Install a ZeroTier client on the device that will gain access to the router remotely, such as an Android smartphone for example. Enter your network ID and connect.

You will have to repeat the same procedure from step 6 above to authorize access to the clients that will connect to this network.

  1. You will be able to access the router through ZeroTier's IP address, the same one chosen for the network in step 4.

(back to top)

Padarouter

Padarouter brings a router management interface through an app for Android devices. Originally Chinese, the app has a version in English, Russian and Brazilian Portuguese, the latter translated by me.

Padarouter

(back to top)

Sponsoring

If you like this work, give me it a star on GitHub, and consider supporting it:

PayPal

(back to top)