-
Notifications
You must be signed in to change notification settings - Fork 5
ft 991a usb audio voicemeeter configuration
Rodrigo Freire edited this page Apr 23, 2020
·
6 revisions
A number of menu configurations must be set in order to the radio receive the computer-generated audio and transmit it properly.
Notice that these settings will not inhibit your front port mic - If a PTT event is commanded from the front PTT port, the radio will get the audio from the front port.
Menu Item | Value | Why |
---|---|---|
045 AM Mic Select | REAR | In a CAT/MOX PTT event while in this mode, where does the audio comes from? |
048 AM Port Select | USB | Toggles between USB port or the DATA/RTTY port (TNCs). We want USB |
072 Data Port Select | USB | Toggles between USB port or the DATA/RTTY port (TNCs). We want USB |
074 FM Mic Select | REAR | In a CAT/MOX PTT event while in this mode, where does the audio comes from? |
077 FM Pkt Port Select | USB | Toggles between USB port or the DATA/RTTY port (TNCs). We want USB |
106 SSB Mic Select | REAR | In a CAT/MOX PTT event while in this mode, where does the audio comes from? |
109 SSB Port Select | USB | Toggles between USB port or the DATA/RTTY port (TNCs). We want USB |
Menu Item | Value | Why |
---|---|---|
142 Vox Select | DATA | Otherwise, the radio will expect the audio to trigger the VOX mode from the front Mic port |
146 Data Vox Gain | 90 | I found the Digital VOX to be few sensitive - so crank up and avoid drops in middle words |
147 Data Vox Delay | 1200 | This is for how long VOX stays active (in milisseconds; meaning 1.2s) after last peak stimuli - For how long VOX stays up after last voice peak. Having for too short, you are going to be cut on short silences and umm/errr/ahhh etc; too high vox stays on for a long time after you stop talking. |
Menu Item | Value | Why |
---|---|---|
026 Beep Level | 15 | Reduces the button press beep volume, isn't it too loud? |
036 TX TOT | 7min | Avoids stuck mic and you transmitting a scene over the air (for so long) |
059 CW Freq Display | DIRECT FREQ | Avoids shifting frequencies by 900 Hz when switching different modes, like USB, CW, FM, etc. |
110 SSB TX BPF | 100-2900 | Widens the audio gamut that you can transmit, enabling more bassy audio. |
Next up: