CPR E 381 Project: Three MIPS Processor Designs - VHDL and Waveform Simulations

Authors - Iowa State University Department of Electrical and Computer Engineering

• Anthony Manschula: B.S. Computer Engineering Class of 2024
• Henry Shires: B.S. Computer Engineering Class of 2025

IMPORTANT: Before proceeding, ensure that you have reviewed the lab manuals and cpre381-toolflow.pdf located in /manuals.

Overview

This repository contains the collaborative work of Anthony Manschula and Henry Shires for the undergraduate CPR E 381 Computer Organization & Assembly-Level Programming lab project at Iowa State University.

Design Modules

1. Single-Cycle

• Executes MIPS instructions in a single clock cycle.

2. Software-Scheduled

• Executes MIPS instructions using a 5-stage multi-cycle pipeline without hardware hazard mitigation.
• Note: MIPS programs tested under this design require the use of No-op instructions (nop) to handle data and control hazards.

3. Hardware-Scheduled

• Executes MIPS instructions using a 5-stage multi-cycle pipeline with hardware mitigation for data and control hazards.
• All MIPS programs can be tested unmodified for hazards (nops not required).

Project Structure

Deliverables

• The root directory includes a final report of our design steps, analysis, and findings with each processor design and a spreadsheet documenting the core MIPS Instruction Set Architecture (ISA) instructions as handled by our control unit in all three processors.
• The final report also contains a high-level schematic of the single-cycle and pipelined processor hardware.

Manuals

• /Manuals contains PDFs documenting the lab steps and guidelines on using the toolflow.

Processor Directories

• [proc]/internal includes provided boilerplates for the 381_tf.sh shell script. DO NOT EDIT THESE.
• [proc]/proj is the project source code and test files. The shell script will automatically generate necessary files based on the steps outlined in the manuals, execute test case assembly scripts, and output test case results.
• [proc]/temp includes a timing sheet for each processor that notes the clock frequency and critical path of the processor based on an FPGA sythesis run according to the toolflow instructions.

Getting Started, Try the designs yourself!

1. Clone this repository to your local machine.
2. Review the lab manual and toolflow documentation in /manuals.
3. Navigate to the relevant processor directory [proc]/proj.
4. Run the toolflow with the given test cases to see how each processor performs, following the guidelines provided in the manuals.

Additional Information

For any questions or clarifications, please contact the project authors:

• Anthony Manschula: [[email protected]]
• Henry Shires: [[email protected]]