Skip to content

Point correspondence-based display calibration and ArUco marker tracking for the HoloLens 2.

Notifications You must be signed in to change notification settings

doughtmw/display-calibration-hololens

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

9 Commits
 
 
 
 
 
 

Repository files navigation

Display Calibration HoloLens

Point correspondence-based display calibration and ArUco marker tracking for the HoloLens 2.

This is the accompanying GitHub repo for our paper investigating the perceptual accuracy of manual tasks using an optical see-through head-mounted display (OST-HMD) for guidance:

Table of contents

Project setup

Folder setup for the project sample.

data/
... GroundTruths/
... MarkerConfig/
... SampleResults/
... ... Figures/
... ... Matlab/
... ... Traces/
... ... Truths/
... TraceTargets/
... TraceTemplate/

unity-sandbox/
... CustomArUcoBoards/
... HoloLens2-Display-Calibration/
... OpenCVRuntimeComponent/

Data

We have included the ArUco board tracking configuration that we used in our study, along with the calibration marker used for per-user display calibration. There are several test cases of scanned user-trace results available in the data/SampleResults/Traces folder. Additionally, we have included the relevant Matlab scripts used for processing the user-trace data and computing relevant metrics of accuracy.

Printing the required calibration object and tracking board

To be able to use this repo for tracking and display calibration, we need to first print off the required materials.

  1. In the data/TraceTemplate/ folder, open the trace_template.pdf document (or data/MarkerConfig/ and the board_config.pdf document) and print at 100% scale (actual document size). Attach/tape down the trace template onto a flat object to hold it in place during tracking.

  1. In the data/MarkerConfig/ folder, open the calibration_marker_config.pdf document and print at 100% scale. Create a calibration marker as shown below using cardboard and a handle.

You now have the materials prepared for calibration and tracking.

Optional: Confirming the board object for tracking

  • Open the CustomArUcoBoards solution in Visual Studio
  • Using the Nuget package manager console, install the OpenCV.Windows.3411.0.0.nupkg NuGet package to the CustomArUcoBoards project
Install-Package ..\OpenCV.Windows.3411.0.0.nupkg -ProjectName CustomArUcoBoards
  • CustomArUcoBoards is a sandbox environment set up to test the performance of custom ArUco board object tracking
  • Run the sample (x64 or x86), a window will appear showing the created ArUco markers (which will be saved as images), press escape to close each window
  • If you have a webcam on your PC, the video stream will open allowing for testing of the board configuration object by printing the board (as image below)
  • In this example, we used the PDF located at data/MarkerConfig/board_config.pdf for configuring the ArUco tracking board object

Running on the HoloLens 2

About

  • In this sample I am using build 19041.1161 (Windows Holographic, version 20H2 - August 2021 Update) which can be downloaded from MSFT via the following link and installed using the Advanced Recovery Companion
  • Tested with Unity 2019.4 LTS, Visual Studio 2019, and the HoloLens 2

Optional: Camera calibration for the HoloLens 2

  • We found that there was better accuracy of marker-based registration while using the intrinsics provided by the VideoMediaFrame.CameraIntrinsics.UndistortedProjectionTransform utility, though you are welcome to try a standard camera calibration procedure to see if your accuracy improves. There are more details of how to do this in another repo of mine.

Optional: Build runtimes from source for ARM64

  • Open the OpenCVRuntimeComponent solution in Visual Studio
  • Using the Nuget package manager console, install the OpenCV.HoloLens.3411.0.0.nupkg NuGet package to the OpenCVRuntimeComponent project
Install-Package ..\OpenCV.HoloLens.3411.0.0.nupkg -ProjectName OpenCVRuntimeComponent
  • OpenCVRuntimeComponent takes video frames from the C# Unity project and performs the tasks of marker tracking using the ArUco library and rigid transform estimation for display calibration
  • The sample uses the Universal Windows Platform and can be built to .winmd and .dll files which are used for the HoloLens 2 app
    • Output build directory OpenCVRuntimeComponent/ARM64/(Release/Debug)/OpenCVRuntimeComponent/
  • For use in Unity, copy the files in the output build directory above to the unity-sandbox/HoloLens2-Display-Calibration/Assets/Plugins/ARM64/ folder

Deploy and run the sample on the HoloLens 2

  • Optional: If OpenCVRuntimeComponent was built from source, copy .winmd, .dll and .lib files from OpenCVRuntimeComponent/ARM64/(Release/Debug)/OpenCVRuntimeComponent/ to the Unity plugins directory unity-sandbox/HoloLens2-Display-Calibration/Assets/Plugins/ARM64/ folder

Open HoloLens2-Display-Calibration in Unity. There are several different scenes available for selection in the Assets/Scenes/ folder, as detailed in our paper, these will determine which tracing paradigm (adjacent, direct, or calibrated) will be used for the experiment.

hmd adjacent: There is no calibration procedure required, when looking at the printed trace template, you will see a virtual model augmented adjacent to the tracking target.

hmd calib: There is an additional calibration procedure required, with 10 point correspondences collected per eye. For the point collection process you need to align the tracked marker corners with the virtual on-screen reticle and press spacebar on a bluetooth or USB keyboard connected to the HoloLens 2 (or use the double-tap gesture) to collect that point correspondence. Virtual marker positions will change slightly across each calibration point correspondence. Begin calibration with your right eye (left eye closed), next calibrate left eye (right eye closed).

After completing calibration, set down the calibration object and look at the printed trace template. You should now see a virtual model augmented directly on the tracking target.

hmd: There is no additional calibration required, when looking at the printed trace template, you will see a virtual model augmented directly on the tracking target.

There are a number of settings which can be adjusted on the ScriptHolder gameobject in Unity, including:

  • Media capture profile on the HoloLens 2 (896x504 by default)
  • ArUco dictionary for marker generation (6x6_250 by default)
  • Tracking type for calibration (markers by default) and after calibration (custom board by default, can also select markers)
  • Intrinsic parameters used (per frame provided intrinsics are default)
  • Marker positions of the custom board object (the corner locations of the ArUco markers)
  • A predefined transform (default is the identity transform)
  • Reticle point locations and the number of point correspondences for the left and right eye during calibration

After selecting the desired tracking scene, we can now build the scene to the device.

  • Switch build platform to Universal Windows Platform, select HoloLens for target device, and ARM64 as the target platform
  • Using the MRTK build window, build the solution and deploy the .appx file to the HoloLens 2

Evaluation

Evaluation of the user trace performance relative to ground truth points and contours was performed in Matlab.

  • Using matlab tool located in data/SampleResults/Matlab folder, open the Main.m script
  • The desired scanned user-trace result can be modified (default is data/Traces/calib_gt_02.jpg) to one of the included test samples
    • Also be sure to modify the selected ground truth to reflect the user-trace template (e.g. Traces/calib_gt_02.jpg uses Truths/GT_02.jpg as a ground truth template)
  • Running the Matlab script will present the following outputs:
  • The selected user trace and ground truth

  • A confirmation of registration of the two scans (check the overlap of the ArUco marker targets to confirm)

  • Trace and truth processing (manual input required, double click final point to confirm selection) to encircle the user-drawn or ground truth simulated injection points

  • Trace and truth circle fit confirmation, ensure that the correct injection points have been selected

  • And the final resulting script output including mean and standard deviation target registration error (mm) of the points and average symmetric surface distance (mm) of the contour

Citation

If you found this code repo useful, please consider citing the associated publication:

@article{jimaging8020033,
    author={Doughty, Mitchell and Ghugre, Nilesh R.},
    title={Head-Mounted Display-Based Augmented Reality for Image-Guided Media Delivery to the Heart: A Preliminary Investigation of Perceptual Accuracy},
    journal={Journal of Imaging},
    volume={8},
    year={2022},
    number={2},
    article-number={33},
    url={https://www.mdpi.com/2313-433X/8/2/33},
    issn={2313-433X},
    doi = {10.3390/jimaging8020033}
}

About

Point correspondence-based display calibration and ArUco marker tracking for the HoloLens 2.

Topics

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published