Repository to store software, configurations and settings for developing video-enabled applications on Raspberry Pi.
This currently includes the Livebulb
concept - a lightbulb-like device with livestreaming capabilities.
For some insights into the Livebulb
, read this issue.
To set up a livebulb, run these steps on a raspberrypi zero w:
-
Mount a Raspbian 10 (Buster) Lite image to a SD card
-
Add these files to the
boot
partition
Connect to the raspberrypi via ssh
Enable the camera by running the following command and using the GUI to enable the camera
sudo raspi-config
Then run the following commands
sudo apt update
sudo apt upgrade
sudo apt install ffmpeg
wget https://raw.githubusercontent.com/videoDAC/raspberrypi/master/systemd/livecam.service
sudo mv livecam.service /etc/systemd/system
sudo systemctl enable /etc/systemd/system/livecam.service
sudo reboot