Tools for Vorago 404 "gaming mouse" under GNU/Linux

Mouse polling rate explained

• 1000 Hz = options usbhid mousepoll=1
• 500 Hz = options usbhid mousepoll=2
• 250 Hz = options usbhid mousepoll=4
• 125 Hz = options usbhid mousepoll=8

Set mouse polling rate. Method one (via etc/modprobe.d/):

Open a terminal and type:

• cd /
• sudo pluma etc/modprobe.d/usbhid.conf

In that file, add the following:

options usbhid mousepoll=1

Save and exit.

• sudo modprobe -r usbhid && sudo modprobe usbhid

You can check mouse polling rate, opening a terminal and typing:

• cd /
• cat sys/module/usbhid/parameters/mousepoll

If you see "1", then mouse polling rate (1000 Hz) is enabled.

Set mouse polling rate. Method two (via boot kernel module parameter):

Open a terminal and type:

• cd /
• sudo pluma /etc/default/grub

In that file, look for the line that says "GRUB_CMDLINE_LINUX_DEFAULT="quiet" and add the following:

usbhid.mousepoll=1

The line should look like this:

"GRUB_CMDLINE_LINUX_DEFAULT="quiet usbhid.mousepoll=1"

Save and exit.

• sudo update-grub
• sudo update-grub2
• sudo modprobe -r usbhid && sudo modprobe usbhid

You can check mouse polling rate, opening a terminal and typing:

• cd /
• cat sys/module/usbhid/parameters/mousepoll

If you see "1", then mouse polling rate (1000 Hz) is enabled.

Fix hid-generic 0003:1D57:FA0A.0002: usb_submit_urb(ctrl) failed: -1

Open a terminal and type:

• cd /
• sudo pluma /etc/default/grub

In that file, look for the line that says "GRUB_CMDLINE_LINUX_DEFAULT ="quiet" and add the following:

usbhid.quirks=0x1D57:0xFA0A:0x20000000

The line should look like this:

"GRUB_CMDLINE_LINUX_DEFAULT="quiet usbhid.quirks=0x1D57:0xFA0A:0x20000000"

Save and exit.

• sudo update-grub
• sudo update-grub2
• sudo reboot

Tools for Vorago 404 "gaming mouse" under GNU/Linux. Coming soon... ;-)´