cdm-flowparser project is a Python 3 (Python 2 support is limited) extension module. The module provided functions can takes a file with a python code or a character buffer, parse it and provide back a hierarchical representation of the code in terms of fragments. Each fragment describes a portion of the input: a start point (line, column and absolute position) plus an end point (line, column and absolute position).
Comments are preserved too.
The module is used in the Codimension Python IDE to generate a flowchart-like diagrams for an arbitrary Python code as the user types it. Basically the IDE detects a pause in typing and regenerates the diagram.
The master branch contains code for Python 3 (3.5/3.6 grammar is covered).
The module can be installed using pip:
pip install cdmcfparserYou can also retrieve the full source code which in addition has some utilities. In order to do that you can follow these steps:
git clone https://github.com/SergeySatskiy/cdm-flowparser.git
cd cdm-flowparser
make
make check
make localinstallSuppose there is ~/my-file.py file with the following content:
#!/bin/env python
import sys
# I like comments
a = 154
for x in range(a):
print("x = " + str(x))
sys.exit(0)Then you can run a test utility (if you have a local repository clone):
~/cdm-flowparser/utils/run.py ~/my-file.pyThe output will be the following:
Running control flow parser version: trunk
Module location: /home/swift/cdm-flowparser/cdmcfparser.cpython-35m-x86_64-linux-gnu.so
<ControlFlow [0:113] (1,1) (9,11)
Body: [18:113] (2,1) (9,11)
LeadingComment: None
SideComment: None
LeadingCMLComments: n/a
SideCMLComments: n/a
isOK: true
Errors: n/a
Warnings: n/a
BangLine: [0:16] (1,1) (1,17)
EncodingLine: None
Docstring: None
Suite: <Import [18:27] (2,1) (2,10)
Body: [18:27] (2,1) (2,10)
LeadingComment: None
SideComment: None
LeadingCMLComments: n/a
SideCMLComments: n/a
FromPart: None
WhatPart: [25:27] (2,8) (2,10)
>
<CodeBlock [30:54] (4,1) (5,7)
Body: [48:54] (5,1) (5,7)
LeadingComment: <Comment [30:46] (4,1) (4,17)
Parts: <Fragment [30:46] (4,1) (4,17)
>
>
SideComment: None
LeadingCMLComments: n/a
SideCMLComments: n/a
>
<For [56:100] (6,1) (7,26)
Body: [56:73] (6,1) (6,18)
LeadingComment: None
SideComment: None
LeadingCMLComments: n/a
SideCMLComments: n/a
Async: None
For: [56:58] (6,1) (6,3)
Iteration: [60:72] (6,5) (6,17)
Suite: <CodeBlock [79:100] (7,5) (7,26)
Body: [79:100] (7,5) (7,26)
LeadingComment: None
SideComment: None
LeadingCMLComments: n/a
SideCMLComments: n/a
>
ElsePart: None
>
<CodeBlock [103:113] (9,1) (9,11)
Body: [103:113] (9,1) (9,11)
LeadingComment: None
SideComment: None
LeadingCMLComments: n/a
SideCMLComments: n/a
>
>
Attention: Python 2 version is not supported anymore. There will be no more Python 2 releases.
The latest Python 2 release is 1.0.1. Both pre-built modules and source code are available in the releases area on github: latest Python 2 release 1.0.1.
To build a Python 2 module from sources please follow these steps:
cd
wget https://github.com/SergeySatskiy/cdm-flowparser/archive/v1.0.1.tar.gz
gunzip v1.0.1.tar.gz
tar -xf v1.0.1.tar
cd cdm-flowparser-1.0.1/
make
make localinstall
make checkSuppose there is the following file ~/my-file.py with the following content:
#!/usr/bin/python
import sys
# I like comments
a = 154
for x in xrange( a ):
print "x = " + str( x )
sys.exit( 0 )Then you can run a test utility:
~/cdm-flowparser/utils/run.py ~/my-file.pyThe output will be the following:
Running control flow parser version: trunk
<ControlFlow [0:119] (1,1) (9,13)
isOK: true
Errors: n/a
Warnings: n/a
BangLine: [0:16] (1,1) (1,17)
EncodingLine: None
Docstring: None
Suite: <Import [18:27] (2,1) (2,10)
Body: [18:27] (2,1) (2,10)
LeadingComment: None
SideComment: None
LeadingCMLComments: n/a
SideCMLComments: n/a
FromPart: None
WhatPart: [25:27] (2,8) (2,10)
>
<CodeBlock [30:54] (4,1) (5,7)
Body: [48:54] (5,1) (5,7)
LeadingComment: <Comment [30:46] (4,1) (4,17)
Parts: <Fragment [30:46] (4,1) (4,17)
>
>
SideComment: None
LeadingCMLComments: n/a
SideCMLComments: n/a
>
<For [56:104] (6,1) (7,27)
Body: [56:76] (6,1) (6,21)
LeadingComment: None
SideComment: None
LeadingCMLComments: n/a
SideCMLComments: n/a
Iteration: [60:75] (6,5) (6,20)
Suite: <CodeBlock [82:104] (7,5) (7,27)
Body: [82:104] (7,5) (7,27)
LeadingComment: None
SideComment: None
LeadingCMLComments: n/a
SideCMLComments: n/a
>
ElsePart: None
>
<SysExit [107:119] (9,1) (9,13)
Body: [107:119] (9,1) (9,13)
LeadingComment: None
SideComment: None
LeadingCMLComments: n/a
SideCMLComments: n/a
Argument: [117:117] (9,11) (9,11)
>
>
Basically the 'run.py' utility has the following essential lines for the example above:
from cdmcfparser import getControlFlowFromFile
controlFlow = getControlFlowFromFile("my-file.py")
# Serializes nicely the controlFlow object
# See the run.py for the details of how it is doneThe run.py is available in a local clone at ~/cdm-flowparser/utils/run.py or you can see the source code online