Skip to content

tmkdev/gmlan_gw

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

13 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

gmlan_gw

Currently this project is trying to learm more about GMLAN 29bit protocol.

Using a raspberry pi as the develompement platform along with a SWCAN pi plate. Logging is done with canutils candump.

Logging: candump can0 -L > $logname Playback: zcat log | canplayer vcan0=can0

running gmlan_gw.py while playing back a log will interpret IDs I am working on.

More to come. Very early stages.

-- Setup for a raspberry pi: /boot/config.txt dtparam=spi=on dtoverlay=mcp2515-can0,oscillator=16000000,interrupt=24

  • Verify your interrupt pin and osc freq. I have both 8MHz and 16MHz MCP boards. Gotta match or you spend HOURS debugging.

/etc/network/interfaces:

allow-hotplug can0 iface can0 can static bitrate 33000 up /sbin/ip link set $IFACE down up /sbin/ip link set $IFACE up txqueuelen 1000 type can bitrate 33000 sample-point 0.7 triple-sampling off restart-m s 500

auto vcan0 iface vcan0 inet manual pre-up /sbin/ip link add dev $IFACE type vcan up /sbin/ifconfig $IFACE up

  • vcan0 is used to play back logs to scripts under test/development.

-- Record of logs: candump can0 -L > $logname

-- Playback of logs: canplayer vcan0=can0 -I canlog.log

Releases

No releases published

Packages

No packages published