Skip to content

tdorssers/TeslaPy

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

TeslaPy

A Python implementation based on unofficial documentation of the client side interface to the Tesla Motors Owner API, which provides functionality to monitor and control Tesla products remotely.

The Owner API will stop working as vehicles begin requiring end-to-end command authentication using the Tesla Vehicle Command Protocol. Pre-2021 Model S and X vehicles do not support this new protocol and remain controllable using TeslaPy.

Version Downloads

Overview

This module depends on Python requests, requests_oauthlib and websocket-client. It requires Python 3.10+ when using urllib3 2.0, which comes with requests 2.30.0+, or you can pin urllib3 to 1.26.x by installing urllib3<2.

The Tesla class extends requests_oauthlib.OAuth2Session which extends requests.Session and therefore inherits methods like get() and post() that can be used to perform API calls. Module characteristics:

  • It implements Tesla's new OAuth 2 Single Sign-On service.
  • Acquired tokens are stored in current working directory in cache.json file for persistence by default.
  • The cache stores tokens of each authorized identity (email).
  • Authentication is only needed when a new token is requested (usually once).
  • The token is automatically refreshed when expired without the need to reauthenticate.
  • An email registered in another region (e.g. auth.tesla.cn) is also supported.
  • Streaming API support using a WebSocket.
  • Pluggable cache and authenticator methods.

TeslaPy 2.0.0+ no longer implements headless authentication. The constructor differs and takes these arguments:

Argument Description
email SSO identity
verify (optional) verify SSL certificate
proxy (optional) URL of proxy server
retry (optional) number of connection retries or Retry instance
timeout (optional) Connect/read timeout
user_agent (optional) the User-Agent string
authenticator (optional) Function with one argument, the authorization URL, that returns the redirected URL
cache_file (optional) path to cache file used by default loader and dumper
cache_loader (optional) function that returns the cache dict
cache_dumper (optional) function with one argument, the cache dict
sso_base_url (optional) URL of SSO service, set to https://auth.tesla.cn/ if your email is registered in another region
state (optional) state string for CSRF protection
code_verifier (optional) PKCE code verifier string
app_user_agent (optional) X-Tesla-User-Agent string

TeslaPy 2.1.0+ no longer implements RFC 7523 and uses the SSO token for all API requests.

The class will open Tesla's SSO page in the system's default web browser to authenticate. After successful authentication, a Page not found will be displayed and the URL should start with https://auth.tesla.com/void/callback, which is the redirected URL. The class will use stdio to get the full redirected URL from the web browser by default. You need to copy and paste the full URL from the web browser to the console to continue aquirering API tokens. You can use a pluggable authenticator method to automate this, for example using pywebview or selenium. It is also possible to use an SSO refresh token obtained by a 3rd party authentication app.

The convenience method api() uses named endpoints listed in endpoints.json to perform calls, so the module does not require changes if the API is updated. api() substitutes path variables in the URI and calls fetch_token() when needed. Any error message returned by the API is raised as an HTTPError exception. Additionally, the class implements the following methods:

Call Description
request() performs API call using relative or absolute URL, serialization and error message handling
new_code_verifier() generates code verifier for PKCE
authorization_url() forms authorization URL with PKCE extension and tries to detect the accounts registered region
fetch_token() requests an SSO token using Authorization Code grant with PKCE extension
refresh_token() requests an SSO token using Refresh Token grant
close() remove all requests adapter instances
logout() removes token from cache, returns logout URL and optionally signs out using system's default web browser
vehicle_list() returns a list of Vehicle objects
battery_list() returns a list of Battery objects
solar_list() returns a list of SolarPanel objects

The Vehicle class extends dict and stores vehicle data returned by the Owner API, which is a pull API. The get_vehicle_summary() and get_vehicle_data() calls update the Vehicle instance, merging data. The streaming API pushes vehicle data on-change after subscription. The stream() method takes an optional argument, a callback function that is called with one argument, a dict holding the changed data. The Vehicle object is always updated with the pushed data. If there are no changes within 10 seconds, the vehicle stops streaming data. The stream() method has two more optional arguments to control restarting. Additionally, the class implements the following methods:

Call Online Description
api() Yes performs an API call to named endpoint requiring vehicle_id with optional arguments
get_vehicle_summary() No gets the state of the vehicle (online, asleep, offline)
available() No checks if the vehicle is online based on cached data or refreshed status when aged out
sync_wake_up() No wakes up and waits for the vehicle to come online
decode_option() No lookup option code description (read from option_codes.json)
option_code_list() 1 No lists known descriptions of the vehicle option codes
get_vehicle_data() Yes get vehicle data for selected endpoints, defaults to all endpoints
get_vehicle_location_data() Yes gets the basic and location data for the vehicle
get_nearby_charging_sites() Yes lists nearby Tesla-operated charging stations
get_service_scheduling_data() No retrieves next service appointment for this vehicle
get_charge_history() 2 No lists vehicle charging history data points
mobile_enabled() Yes checks if the Mobile Access setting is enabled in the car
compose_image() 3 No composes a vehicle image based on vehicle option codes
dist_units() No converts distance or speed units to GUI setting of the vehicle
temp_units() No converts temperature units to GUI setting of the vehicle
gui_time() No returns timestamp or current time formatted to GUI setting
last_seen() No returns vehicle last seen natural time
decode_vin() No decodes the vehicle identification number to a dict
command() Yes wrapper around api() for vehicle command response error handling

1 Option codes appear to be deprecated.

2 Car software version 2021.44.25 or higher required, Data Sharing must be enabled and you must be the primary vehicle owner.

3 Pass vehicle option codes to this method now options codes are deprecated.

Only methods with No in the Online column are available when the vehicle is asleep or offline. These methods will not prevent your vehicle from sleeping. Other methods and API calls require the vehicle to be brought online by using sync_wake_up() and can prevent your vehicle from sleeping if called within too short a period.

The Product class extends dict and is initialized with product data of Powerwalls and solar panels returned by the API. Additionally, the class implements the following methods:

Call Description
api() performs an API call to named endpoint requiring battery_id or site_id with optional arguments
get_history_data() Retrieve live status of product
get_calendar_history_data() Retrieve live status of product
command() wrapper around api() for battery command response error handling

The Battery class extends Product and stores Powerwall data returned by the API, updated by get_battery_data(). Additionally, the class implements the following methods:

Call Description
get_battery_data() Retrieve detailed state and configuration of the battery
set_operation() Set battery operation to self_consumption, backup or autonomous
set_backup_reserve_percent() Set the minimum backup reserve percent for that battery
set_import_export() Sets the battery grid import and export settings
get_tariff() Get the tariff rate data
set_tariff() Set the tariff rate data. The data can be created manually, or generated by create_tariff
create_tariff() Creates a correctly formatted dictionary of tariff data

The SolarPanel class extends Product and stores solar panel data returned by the API, updated by get_site_data(). Additionally, the class implements the following methods:

Call Description
get_site_data() Retrieve current site generation data

Usage

Basic usage of the module:

import teslapy
with teslapy.Tesla('[email protected]') as tesla:
    vehicles = tesla.vehicle_list()
    vehicles[0].sync_wake_up()
    vehicles[0].command('ACTUATE_TRUNK', which_trunk='front')
    vehicles[0].get_vehicle_data()
    print(vehicles[0]['vehicle_state']['car_version'])

TeslaPy 2.4.0 and 2.5.0 automatically calls get_vehicle_data() and TeslaPy 2.6.0+ automatically calls get_latest_vehicle_data() when a key is not found. This example works for TeslaPy 2.6.0+:

import teslapy
with teslapy.Tesla('[email protected]') as tesla:
    vehicles = tesla.vehicle_list()
    print(vehicles[0]['display_name'] + ' last seen ' + vehicles[0].last_seen() +
          ' at ' + str(vehicles[0]['charge_state']['battery_level']) + '% SoC')

Example output:

Tim's Tesla last seen 6 hours ago at 87% SoC

Authentication

The Tesla class implements a pluggable authentication method. If you want to implement your own method to handle the SSO page and retrieve the redirected URL after authentication, you can pass a function as an argument to the constructor, that takes the authentication URL as an argument and returns the redirected URL. The authenticator argument is accessible as an attribute as well.

pywebview

Example using a webview component that displays the SSO page in its own native GUI window.

import teslapy
import webview

def custom_auth(url):
    result = ['']
    window = webview.create_window('Login', url)
    def on_loaded():
        result[0] = window.get_current_url()
        if 'void/callback' in result[0].split('?')[0]:
            window.destroy()
    window.loaded += on_loaded
    webview.start()
    return result[0]

with teslapy.Tesla('[email protected]', authenticator=custom_auth) as tesla:
    tesla.fetch_token()

selenium

Example using selenium to automate web browser interaction. The SSO page returns a 403 when navigator.webdriver is set and currently only Chrome, Opera and Edge Chromium can prevent this.

import teslapy
from selenium import webdriver
from selenium.webdriver.support import expected_conditions as EC
from selenium.webdriver.support.ui import WebDriverWait

def custom_auth(url):
    options = webdriver.ChromeOptions()
    options.add_argument("--disable-blink-features=AutomationControlled")
    with webdriver.Chrome(chrome_options=options) as browser:
        browser.get(url)
        WebDriverWait(browser, 300).until(EC.url_contains('void/callback'))
        return browser.current_url

with teslapy.Tesla('[email protected]', authenticator=custom_auth) as tesla:
    tesla.fetch_token()

Alternative

TeslaPy 2.2.0 introduced the authorization_url() method to get the SSO page URL and the option to supply the redirected URL as keyword argument authorization_response to fetch_token() after authentication.

import teslapy
tesla = teslapy.Tesla('[email protected]')
if not tesla.authorized:
    print('Use browser to login. Page Not Found will be shown at success.')
    print('Open this URL: ' + tesla.authorization_url())
    tesla.fetch_token(authorization_response=input('Enter URL after authentication: '))
vehicles = tesla.vehicle_list()
print(vehicles[0])
tesla.close()

Alternative staged

Support for staged authorization has been added to TeslaPy 2.5.0. The keyword arguments state and code_verifier are accepted by the Tesla class constructor, the authorization_url() method and the fetch_token() method.

import teslapy
# First stage
tesla = teslapy.Tesla('[email protected]')
if not tesla.authorized:
    state = tesla.new_state()
    code_verifier = tesla.new_code_verifier()
    print('Use browser to login. Page Not Found will be shown at success.')
    print('Open: ' + tesla.authorization_url(state=state, code_verifier=code_verifier))
tesla.close()
# Second stage
tesla = teslapy.Tesla('[email protected]', state=state, code_verifier=code_verifier)
if not tesla.authorized:
    tesla.fetch_token(authorization_response=input('Enter URL after authentication: '))
vehicles = tesla.vehicle_list()
print(vehicles[0])
tesla.close()

3rd party authentication apps

TeslaPy 2.4.0+ supports usage of a refresh token obtained by 3rd party authentication apps. The refresh token is used to obtain an access token and both are cached for persistence, so you only need to supply the refresh token only once.

import teslapy
with teslapy.Tesla('[email protected]') as tesla:
    if not tesla.authorized:
        tesla.refresh_token(refresh_token=input('Enter SSO refresh token: '))
    vehicles = tesla.vehicle_list()
    print(vehicles[0])

Logout

To use your systems's default web browser to sign out of the SSO page and clear the token from cache:

tesla.logout(sign_out=True)

If using pywebview, you can clear the token from cache and get the logout URL to display a sign out window:

window = webview.create_window('Logout', tesla.logout())
window.start()

Selenium does not store cookies, just clear the token from cache:

tesla.logout()

Cache

The Tesla class implements a pluggable cache method. If you don't want to use the default disk caching, you can pass a function to load and return the cache dict, and a function that takes a dict as an argument to dump the cache dict, as arguments to the constructor. The cache_loader and cache_dumper arguments are accessible as attributes as well.

import json
import sqlite3
import teslapy

def db_load():
    con = sqlite3.connect('cache.db')
    cur = con.cursor()
    cache = {}
    try:
        for row in cur.execute('select * from teslapy'):
            cache[row[0]] = json.loads(row[1])
    except sqlite3.OperationalError:
        pass
    con.close()
    return cache

def db_dump(cache):
    con = sqlite3.connect('cache.db')
    con.execute('create table if not exists teslapy (email text primary key, data json)')
    for email, data in cache.items():
        con.execute('replace into teslapy values (?, ?)', [email, json.dumps(data)])
    con.commit()
    con.close()

with teslapy.Tesla('[email protected]', cache_loader=db_load, cache_dumper=db_dump) as tesla:
    tesla.fetch_token()

Absolute URL

The Safety Scores are obtained though another API. TeslaPy 2.1.0 introduced absolute URL support for accessing non-Owner API endpoints.

from teslapy import Tesla

with Tesla('[email protected]') as tesla:
    vehicles = tesla.vehicle_list()
    url = 'https://akamai-apigateway-vfx.tesla.com/safety-rating/daily-metrics'
    print(tesla.get(url, params={'vin': vehicles[0]['vin'], 'deviceLanguage': 'en',
                                 'deviceCountry': 'US', 'timezone': 'UTC'}))

Robustness

TeslaPy uses an adjustable connect and read timeout of 10 seconds by default. Refer to the timeouts section for more details. TeslaPy does not retry failed or timed out connections by default, which can be enabled with the retry parameter.

tesla = teslapy.Tesla('[email protected]', retry=2, timeout=15)

A robust program accounting for network failures has a retry strategy, that includes the total number of retry attempts to make, the HTTP response codes to retry on and optionally a backoff factor. Refer to the retry module for more details.

Be aware that Tesla may temporarily block your account if you are hammering the servers too much.

import teslapy
retry = teslapy.Retry(total=2, status_forcelist=(500, 502, 503, 504))
with teslapy.Tesla('[email protected]', retry=retry) as tesla:
    vehicles = tesla.vehicle_list()
    print(vehicles[0])
vehicles[0].command('FLASH_LIGHTS')  # Raises exception

The line after the context manager will raise an exception when using TeslaPy 2.5.0+ because it explicitly closes the requests connection handler when the context manager exits. Earlier versions would not raise an exception and retries would not work.

Take a look at cli.py, menu.py or gui.py for more code examples.

Commands

These are the major commands:

Endpoint Parameters Value
UNLOCK
LOCK
HONK_HORN
FLASH_LIGHTS
CLIMATE_ON
CLIMATE_OFF
MAX_DEFROST on true or false
CHANGE_CLIMATE_TEMPERATURE_SETTING driver_temp, passenger_temp temperature in celcius
SET_CLIMATE_KEEPER_MODE climate_keeper_mode 0=off, 1=on, 2=dog, 3=camp
HVAC_BIOWEAPON_MODE on true or false
SCHEDULED_DEPARTURE 1 enable, departure_time, preconditioning_enabled, preconditioning_weekdays_only, off_peak_charging_enabled, off_peak_charging_weekdays_only, end_off_peak_time true or false, minutes past midnight
SCHEDULED_CHARGING 1 enable, time true or false, minutes past midnight
CHARGING_AMPS 1 charging_amps between 0-32
SET_CABIN_OVERHEAT_PROTECTION on, fan_only true or false
CHANGE_CHARGE_LIMIT percent percentage
SET_VEHICLE_NAME vehicle_name name
CHANGE_SUNROOF_STATE state vent or close
WINDOW_CONTROL 2 command, lat, lon vent or close, 0, 0
ACTUATE_TRUNK which_trunk rear or front
REMOTE_START
TRIGGER_HOMELINK lat, lon current lattitude and logitude
CHARGE_PORT_DOOR_OPEN
CHARGE_PORT_DOOR_CLOSE
START_CHARGE
STOP_CHARGE
SET_COP_TEMP temp temperature in celcius
MEDIA_TOGGLE_PLAYBACK
MEDIA_NEXT_TRACK
MEDIA_PREVIOUS_TRACK
MEDIA_NEXT_FAVORITE
MEDIA_PREVIOUS_FAVORITE
MEDIA_VOLUME_UP
MEDIA_VOLUME_DOWN
SET_VALET_MODE on, password true or false, 4 digit PIN
RESET_VALET_PIN
SPEED_LIMIT_ACTIVATE pin 4 digit PIN
SPEED_LIMIT_DEACTIVATE pin 4 digit PIN
SPEED_LIMIT_SET_LIMIT limit_mph between 50-90
SPEED_LIMIT_CLEAR_PIN pin 4 digit PIN
SCHEDULE_SOFTWARE_UPDATE offset_sec seconds
CANCEL_SOFTWARE_UPDATE
SET_SENTRY_MODE on true or false
REMOTE_SEAT_HEATER_REQUEST heater, level seat 0-5, level 0-3
REMOTE_AUTO_SEAT_CLIMATE_REQUEST auto_seat_position, auto_climate_on 1-2, true or false
REMOTE_SEAT_COOLING_REQUEST seat_position, seat_cooler_level
REMOTE_STEERING_WHEEL_HEATER_REQUEST on true or false

1 requires car version 2021.36 or higher. Setting charging_amps to 2 or 3 results in 3A and setting to 0 or 1 results in 2A.

2 close requires lat and lon values to be near the current location of the car.

Exceptions

Basic exception handling:

try:
    vehicles[0].command('HONK_HORN')
except teslapy.HTTPError as e:
    print(e)

All requests.exceptions and oauthlib.oauth2.rfc6749.errors classes are imported by the module. When the vehicle is asleep or offline and the vehicle needs to be online for the API endpoint to be executed, the following exception is raised: requests.exceptions.HTTPError: 408 Client Error: vehicle unavailable. The exception can be caught as teslapy.HTTPError.

Additionally, sync_wake_up() raises teslapy.VehicleError when the vehicle does not come online within the specified timeout. And command() also raises teslapy.VehicleError when the vehicle command response result is False. For instance, if one of the media endpoints is called and there is no user present in the vehicle, the following exception is raised: VehicleError: user_not_present.

As of January 29, 2021, Tesla updated this endpoint to follow RFC 7523 and requires the use of the SSO service (auth.tesla.com) for authentication. If you get a requests.exceptions.HTTPError: 400 Client Error: endpoint_deprecated:_please_update_your_app for url: https://owner-api.teslamotors.com/oauth/token then you are probably using an old version of this module.

As of September 3, 2021, Tesla has added ReCaptcha to the login form. This caused the headless login implemented by TeslaPy to break. If you get a ValueError: Credentials rejected. Recaptcha is required and you are using correct credentials then you are probably using an old version of this module.

As of January 12, 2022, Tesla has deprecated the use of RFC 7523 tokens and requires the SSO tokens to be used for API access. If you get a requests.exceptions.HTTPError: 401 Client Error: Unauthorized for url: https://owner-api.teslamotors.com/api/1/vehicles and you are using correct credentials then you are probably using an old version of this module.

As of January 7, 2024, Tesla has removed the VEHICLE_LIST endpoint. If you get a requests.exceptions.HTTPError: 412 Client Error: Endpoint is only available on fleetapi. Visit https://developer.tesla.com/docs for more info then you are probably using an old version of this module.

Demo applications

The source repository contains three demo applications that optionally use pywebview version 3.0 or higher or selenium version 3.13.0 or higher to automate weblogin. Selenium 4.0.0 or higher is required for Edge Chromium.

cli.py is a simple CLI application that can use almost all functionality of the TeslaPy module. The filter option allows you to select a product if more than one product is linked to your account. API output is JSON formatted:

usage: cli.py [-h] -e EMAIL [-f FILTER] [-a API [KEYVALUE ...]] [-k KEYVALUE]
              [-c COMMAND] [-t TIMEOUT] [-p PROXY] [-R REFRESH] [-U URL] [-l]
              [-o] [-v] [-w] [-g] [-b] [-n] [-m] [-s] [-d] [-r] [-S] [-H] [-V]
              [-L] [-u] [--chrome] [--edge]

Tesla Owner API CLI

optional arguments:
  -h, --help            show this help message and exit
  -e EMAIL              login email
  -f FILTER             filter on id, vin, etc.
  -a API [KEYVALUE ...]
                        API call endpoint name
  -k KEYVALUE           API parameter (key=value)
  -c COMMAND            product command endpoint
  -t TIMEOUT            connect/read timeout
  -p PROXY              proxy server URL
  -R REFRESH            use this refresh token
  -U URL                SSO service base URL
  -l, --list            list all selected vehicles/batteries
  -o, --option          list vehicle option codes
  -v, --vin             vehicle identification number decode
  -w, --wake            wake up selected vehicle(s)
  -g, --get             get rollup of all vehicle data
  -b, --battery         get detailed battery state and config
  -n, --nearby          list nearby charging sites
  -m, --mobile          get mobile enabled state
  -s, --site            get current site generation data
  -d, --debug           set logging level to debug
  -r, --stream          receive streaming vehicle data on-change
  -S, --service         get service self scheduling eligibility
  -H, --history         get charging history data
  -B, --basic           get basic vehicle data only
  -G, --location        get location (GPS) data, wake as needed
  -V, --verify          disable verify SSL certificate
  -L, --logout          clear token from cache and logout
  -u, --user            get user account details
  --chrome              use Chrome WebDriver
  --edge                use Edge WebDriver

Example usage of cli.py:

python cli.py -e [email protected] -w -a ACTUATE_TRUNK -k which_trunk=front

menu.py is a menu-based console application that displays vehicle data in a tabular format. The application depends on geopy to convert GPS coordinates to a human readable address:

gui.py is a graphical user interface using tkinter. API calls are performed asynchronously using threading. The GUI supports auto refreshing of the vehicle data and displays a composed vehicle image. Note that the vehicle will not go to sleep, if auto refresh is enabled. The application depends on geopy to convert GPS coordinates to a human readable address. If Tcl/Tk GUI toolkit version of your Python installation is lower than 8.6 then pillow is required to display the vehicle image. User preferences, such as which web browser to use for authentication, persist upon application restart.

The vehicle charging history can be displayed in a graph as well.

The demo applications can be containerized using the provided Dockerfile. A bind volume is used to store cache.json and gui.ini in the current directory on the host machine:

sudo docker build -t teslapy .
xhost +local:*
sudo docker run -ti --net=host --privileged -v "$(pwd)":/home/tsla teslapy

Vehicle data

Example output of get_vehicle_data() or python cli.py -e [email protected] -w -g below:

{
    "id": 12345678901234567,
    "vehicle_id": 1234567890,
    "vin": "5YJ3E111111111111",
    "display_name": "Tim's Tesla",
    "option_codes": null,
    "color": null,
    "tokens": [
        "1234567890abcdef",
        "abcdef1234567890"
    ],
    "state": "online",
    "in_service": false,
    "id_s": "12345678901234567",
    "calendar_enabled": true,
    "api_version": 6,
    "backseat_token": null,
    "backseat_token_updated_at": null,
    "user_id": 123456,
    "charge_state": {
        "battery_heater_on": false,
        "battery_level": 44,
        "battery_range": 99.84,
        "charge_current_request": 16,
        "charge_current_request_max": 16,
        "charge_enable_request": true,
        "charge_energy_added": 14.54,
        "charge_limit_soc": 90,
        "charge_limit_soc_max": 100,
        "charge_limit_soc_min": 50,
        "charge_limit_soc_std": 90,
        "charge_miles_added_ideal": 66.5,
        "charge_miles_added_rated": 66.5,
        "charge_port_cold_weather_mode": false,
        "charge_port_door_open": true,
        "charge_port_latch": "Engaged",
        "charge_rate": 455.7,
        "charge_to_max_range": false,
        "charger_actual_current": 0,
        "charger_phases": null,
        "charger_pilot_current": 16,
        "charger_power": 100,
        "charger_voltage": 2,
        "charging_state": "Charging",
        "conn_charge_cable": "IEC",
        "est_battery_range": 78.13,
        "fast_charger_brand": "Tesla",
        "fast_charger_present": true,
        "fast_charger_type": "Combo",
        "ideal_battery_range": 99.84,
        "managed_charging_active": false,
        "managed_charging_start_time": null,
        "managed_charging_user_canceled": false,
        "max_range_charge_counter": 1,
        "minutes_to_full_charge": 15,
        "not_enough_power_to_heat": null,
        "scheduled_charging_pending": false,
        "scheduled_charging_start_time": null,
        "time_to_full_charge": 0.25,
        "timestamp": 1569952097456,
        "trip_charging": true,
        "usable_battery_level": 44,
        "user_charge_enable_request": null
    },
    "climate_state": {
        "battery_heater": false,
        "battery_heater_no_power": null,
        "climate_keeper_mode": "off",
        "driver_temp_setting": 21.0,
        "fan_status": 3,
        "inside_temp": 21.0,
        "is_auto_conditioning_on": true,
        "is_climate_on": true,
        "is_front_defroster_on": false,
        "is_preconditioning": false,
        "is_rear_defroster_on": false,
        "left_temp_direction": 54,
        "max_avail_temp": 28.0,
        "min_avail_temp": 15.0,
        "outside_temp": 13.5,
        "passenger_temp_setting": 21.0,
        "remote_heater_control_enabled": true,
        "right_temp_direction": 54,
        "seat_heater_left": 0,
        "seat_heater_right": 0,
        "side_mirror_heaters": false,
        "smart_preconditioning": false,
        "timestamp": 1569952097456,
        "wiper_blade_heater": false
    },
    "drive_state": {
        "gps_as_of": 1569952096,
        "heading": 240,
        "latitude": 52.531951,
        "longitude": 6.156999,
        "native_latitude": 52.531951,
        "native_location_supported": 1,
        "native_longitude": 6.156999,
        "native_type": "wgs",
        "power": -100,
        "shift_state": null,
        "speed": null,
        "timestamp": 1569952097456
    },
    "gui_settings": {
        "gui_24_hour_time": true,
        "gui_charge_rate_units": "km/hr",
        "gui_distance_units": "km/hr",
        "gui_range_display": "Rated",
        "gui_temperature_units": "C",
        "show_range_units": false,
        "timestamp": 1569952097456
    },
    "vehicle_config": {
        "can_accept_navigation_requests": true,
        "can_actuate_trunks": true,
        "car_special_type": "base",
        "car_type": "model3",
        "charge_port_type": "CCS",
        "eu_vehicle": true,
        "exterior_color": "SolidBlack",
        "has_air_suspension": false,
        "has_ludicrous_mode": false,
        "key_version": 2,
        "motorized_charge_port": true,
        "plg": false,
        "rear_seat_heaters": 0,
        "rear_seat_type": null,
        "rhd": false,
        "roof_color": "Glass",
        "seat_type": null,
        "spoiler_type": "None",
        "sun_roof_installed": null,
        "third_row_seats": "<invalid>",
        "timestamp": 1569952097456,
        "use_range_badging": true,
        "wheel_type": "Pinwheel18"
    },
    "vehicle_state": {
        "api_version": 6,
        "autopark_state_v2": "unavailable",
        "calendar_supported": true,
        "car_version": "2019.32.11.1 d39e85a",
        "center_display_state": 2,
        "df": 0,
        "dr": 0,
        "fd_window": 0,
        "fp_window": 0,
        "ft": 0,
        "is_user_present": true,
        "locked": false,
        "media_state": {
            "remote_control_enabled": true
        },
        "notifications_supported": true,
        "odometer": 6963.081561,
        "parsed_calendar_supported": true,
        "pf": 0,
        "pr": 0,
        "rd_window": 0,
        "remote_start": false,
        "remote_start_enabled": true,
        "remote_start_supported": true,
        "rp_window": 0,
        "rt": 0,
        "sentry_mode": false,
        "sentry_mode_available": true,
        "software_update": {
            "expected_duration_sec": 2700,
            "status": ""
        },
        "speed_limit_mode": {
            "active": false,
            "current_limit_mph": 85.0,
            "max_limit_mph": 90,
            "min_limit_mph": 50,
            "pin_code_set": false
        },
        "sun_roof_percent_open": null,
        "sun_roof_state": "unknown",
        "timestamp": 1569952097456,
        "valet_mode": false,
        "valet_pin_needed": true,
        "vehicle_name": "Tim's Tesla"
    }
}

Example output of get_service_scheduling_data() or python cli.py -e [email protected] --service below:

{
    "vin": "5YJ3E111111111111",
    "next_appt_timestamp": "2021-06-08T13:15:00",
    "next_appt_end_timestamp": null,
    "show_badge": false
}

Powerwall data

Example output of get_battery_data() or python cli.py -e [email protected] -b below:

{
    "energy_site_id": 111110110110,
    "resource_type": "battery",
    "site_name": "Elon's House",
    "id": "STE10110111-00101",
    "gateway_id": "1111100-11-A--AAA11110A1A111",
    "asset_site_id": "a1100111-1a11-1aaa-a111-1a0011aa1111",
    "energy_left": 0,
    "total_pack_energy": 13746,
    "percentage_charged": 0,
    "battery_type": "ac_powerwall",
    "backup_capable": true,
    "battery_power": 0,
    "sync_grid_alert_enabled": false,
    "breaker_alert_enabled": false,
    "components": {
        "solar": true,
        "solar_type": "pv_panel",
        "battery": true,
        "grid": true,
        "backup": true,
        "gateway": "teg",
        "load_meter": true,
        "tou_capable": true,
        "storm_mode_capable": true,
        "flex_energy_request_capable": false,
        "car_charging_data_supported": false,
        "off_grid_vehicle_charging_reserve_supported": false,
        "vehicle_charging_performance_view_enabled": false,
        "vehicle_charging_solar_offset_view_enabled": false,
        "battery_solar_offset_view_enabled": true,
        "show_grid_import_battery_source_cards": true,
        "battery_type": "ac_powerwall",
        "configurable": false,
        "grid_services_enabled": false
    },
    "grid_status": "Active",
    "backup": {
        "backup_reserve_percent": 0,
        "events": null
    },
    "user_settings": {
        "storm_mode_enabled": false,
        "sync_grid_alert_enabled": false,
        "breaker_alert_enabled": false
    },
    "default_real_mode": "self_consumption",
    "operation": "self_consumption",
    "installation_date": "2020-01-01T10:10:00+08:00",
    "power_reading": [
        {
            "timestamp": "2021-02-24T04:25:39+08:00",
            "load_power": 5275,
            "solar_power": 3,
            "grid_power": 5262,
            "battery_power": 10,
            "generator_power": 0
        }
    ],
    "battery_count": 1
}

Energy site data

Example output of get_site_data() or python cli.py -e [email protected] -s below:

{
    "energy_site_id": 111110110110,
    "resource_type": "solar",
    "id": "111aaa00-111a-11a1-00aa-00a1aa1aa0aa",
    "asset_site_id": "a1100111-1a11-1aaa-a111-1a0011aa1111",
    "solar_power": 11892.01953125,
    "solar_type": "pv_panel",
    "storm_mode_enabled": null,
    "powerwall_onboarding_settings_set": null,
    "sync_grid_alert_enabled": false,
    "breaker_alert_enabled": false,
    "components": {
        "battery": false,
        "solar": true,
        "solar_type": "pv_panel",
        "grid": true,
        "load_meter": true,
        "market_type": "residential"
    },
    "energy_left": 0,
    "total_pack_energy": 1,
    "percentage_charged": 0,
    "battery_power": 0,
    "load_power": 0,
    "grid_status": "Unknown",
    "grid_services_active": false,
    "grid_power": -11892.01953125,
    "grid_services_power": 0,
    "generator_power": 0,
    "island_status": "island_status_unknown",
    "storm_mode_active": false,
    "timestamp": "2022-08-15T17:12:26Z",
    "wall_connectors": null
}

Installation

TeslaPy is available on PyPI:

python -m pip install teslapy 'urllib3<2'

Make sure you have Python 2.7+ or 3.5+ installed on your system. Alternatively, clone the repository to your machine and run demo application cli.py, menu.py or gui.py to get started, after installing requests_oauthlib 0.8.0+, geopy 1.14.0+, pywebview 3.0+ (optional), selenium 3.13.0+ (optional) and websocket-client 0.59+ using PIP as follows:

python -m pip install requests_oauthlib geopy pywebview selenium websocket-client

and install ChromeDriver to use Selenium or on Ubuntu as follows:

sudo apt-get install python3-requests-oauthlib python3-geopy python3-webview python3-selenium python3-websocket