Skip to content
This repository has been archived by the owner on Jun 4, 2024. It is now read-only.
/ Osmunda Public archive

An offline geocode library for android, powered by SQLite, using osm data. 离线地理编码Android库,基于SQLite,使用开放街道地图数据。

License

Notifications You must be signed in to change notification settings

sun-jiao/Osmunda

Repository files navigation

Osmunda

中文版

Introduction

Osmunda is an Android library that reads open street map data (osm.pbf, osm.bz2 and osm.gz formats, the latter two are essentially xml), is written to SQLite, and can be used for offline geocoding, etc.

Osmunda is the scientific name of a genus of plants, it's a kind of fern, which was chosen because it starts with OSM.

Development progress

pre-release

To-do

  • Try to use NOSQL database, because OSM data uses a lot of key-value pairs, so NOSQL database may be a better choice.
  • Change method of obtaining administrative divisions in Address().

How to use

Gradle Settings

Step 1.

Add the JitPack repository to your project build.gradle file:

allprojects {
	repositories {
		...
		maven { url 'https://jitpack.io' }
	}
}

Step 2.

Add the dependency

dependencies {
        implementation 'moe.sunjiao:osmunda:<VERSION>'
}

Import

For data Source, see OSM data website

Instantiate an OsmosisReader.

val reader: Reader = OsmosisReader()

Set import relations and ways data, if you don't need them, please do not write the following code. See Storage

reader.options.add (ImportOption.INCLUDE_RELATIONS) // Import relationa data
reader.options.add (ImportOption.INCLUDE_WAYS) // Import ways data

Set the commit frequency, otherwise the default setting (5,000) will be used. See commitFrequency

(reader as OsmosisReader).commitFrequency = 5000

Set the OSM data file or Uri(android.net.Uri), context and database file name, and start reading.

val file = File(requireContext (). filesDir.absolutePath + "/hubei-latest.osm.pbf")
reader.readData(file, requireContext (), "hubei")
	//filename	context		database filename(excepted)
reader.readData(uri, requireContext (), "hubei")
	//android.net.Uri   context     database filename(excepted)

Get import status

Use reader.read to get the number of OSM records read, and reader.insert to get the number of OSM records inserted into the database. (For the reason of difference between them, please refer to commitFrequency )

Use reader.progress to get the current estimated progress as a percentage.

Get a list of existing databases

Use Osmunda(requireContext()).GetDatabaseList() to get the list of imported databases.

Use Osmunda(requireContext()).GetDatabaseByName(databaseName) to get a specific database based with the name.

Geocoding

Use the search function of the Geocoder class to search. You can specify LIMIT and OFFSET in the database when searching, and you can also specify the range of latitude and longitude.

For example, searching for "Central China Normal University" within the scope of Wuhan, LIMIT 10 result, without setting OFFSET:

val hubeiDatabase: SQLiteDatabase = Osmunda(requireContext()).getDatabaseByName("hubei")
val list: List<SearchResult> = Geocoder(hubeiDatabase).search("Central China Normal University", 10, 0, 30.7324, 114.6589, 30.3183, 114.0588)

If you don't set the range, all records in the database will be searched:

val list2: List<SearchResult> = Geocoder(hubeiDatabase).search("Central China Normal University", 10, 0)

If you are searching on the map, you can directly pass the BoundingBox of the current MapView:

val box : BoundingBox = mapView.boundingBox
val list3: List<SearchResult> = Geocoder(hubeiDatabase).search("Central China Normal University", 10, 0, box)

Reverse geocoding

Use the search function of the ReverseGeocoder class to search. You can specify LIMIT and OFFSET in the database when searching.

val list: List<SearchResult> = ReverseGeocoder(hubeiDatabase).search(30.51910, 114.35775, 10, 0)

You can directly pass the Android Location or Osmdroid GeoPoint and IGeoPoint as parameters:

val location : Location = Location(GPS_PROVIDER)
val list2: List<SearchResult> = ReverseGeocoder(hubeiDatabase).search(location, 100, 0)
val geoPoint : GeoPoint = GeoPoint(30.51910, 114.35775)
val list3: List<SearchResult> = ReverseGeocoder(hubeiDatabase).search(geoPoint, 100, 0)
val iGeoPoint : IGeoPoint = mapView.mapCenter
val list4: List<SearchResult> = ReverseGeocoder(hubeiDatabase).search(iGeoPoint, 100, 0)

Get full address

You can use result.toAddress() to get an address, and then get the complete address from the returned Address class, you can also get the country, region, city, road, house number and other information.

for (result in list) {
	val address : Address = result.toAddress()
	val fullAddress : String = address.fullAddress   // full address
	val country : String = address.country  // country
	val state : String = address.state  // province or state
	val city : String = address.city  // city
	val county : String = address.county  // district, county
	val town : String = address.town  // little town
	val street : String = address.street  // road, street
	val housenumber : String = address.housenumber  // house number
	val neighbourhood : String = address.neighbourhood  // community, school, institution, village, etc.
	val housename : String = address.housename  // 
	val postcode : String = address.postcode  // postcode
	val phone : String = address.phone  // phone number
	val website : String = address.website  // website
}

Performance

Test devices: Google Pixel 3, Android Q (10.0)

Test files: hubei.osm.pbf, rhode-island.osm.bz2

The following data are measured in above environment.

Storage

The pbf file size of Hubei Province is 11.64 MiB (17,237,672 bytes), which contains 2,417,117 elements, converted into 5,505,162 database records.

The decompressed database file is 273.91 MiB (287,219,712 bytes), approximately 16.78 times of pbf.

The osm.bz2 file size of Rhode Island is 21.9 MiB (23,009,830 bytes), which contains 1,897,371 elements, converted into 4,525,039 database records.

The decompressed database file is 198.67 MiB (208,318,464 bytes), approximately 9.05 times of osm.bz2.

The data file in a large areas is not necessarily larger than ones in small areas, it is also infected by the local population, density of human settlements, and economic development. It is also related to the availability of Open Street Map services. For example, Guangdong is a populated and developed province and it has 73M of data, while the sparsely populated Xinjiang and Tibet only have 17M and 18M of data (all in pbf format). Please arrange your application according to the actual size of the data. If there is no available data, you can go to overpass-api https://overpass-api.de/api/map?bbox=min_longitude,min_latitude,max_longitude,max_latitude.

You can also choose whether to import relation data and way data according to the needs of your application. For the specific code, see Import

commitFrequency

Since the read operation occurs in the Osmosis instead of Osmunda, the OsmosisReader class in Osmunda is only called after the Osmosis reads an element. The process() function cannot be included in the same transaction.

In order to avoid the high time consumption caused by frequent begining and ending of transactions when inserting data one by one, the commitFrequency variable was set in the OsmosisReader class. When the records to be inserted reaches the number specified by commitFrequency, a Transaction will be opened for batch insert operations.

Before inserting, all currently read pending records are in memory. If the commitFrequency is too high, too much memory will be occupied; and if the commitFrequency is too low, the transaction begining and ending will be carried out frequently, very long time will be consumed.

The default value of commitFrequency is 5,000, you can modify it in your code according to the environment of your application.

Time

Database operation

In terms of read and insert operations, the reading speed of the pbf file is much faster than the XML format. It takes about 0.3-1 seconds to read 250,000 pieces of data, and it takes 5-15 seconds to read the same size of XML data. Inserting 250,000 pieces of data takes 4-7 seconds, regardless of the file format.

In terms of total time consumption, when commitFrequency is set to 1,000 ~ 500,000, the export time of Hubei Province's pbf file is about 2 minutes, and the export time of Rhode Island's osm.bz2 file is about 4 minutes, too small or too large commitFrequency will cause the operation to take a long time, and even almost impossible to complete.

Geocoding

The query operation of reverse geocoding takes 3-5 seconds, and the operation of obtaining the complete address according to the query result takes 0.3-3 seconds. If you query multiple geographic information records at one time, please do not get all the complete addresses at once, but do it when the user accesses a certain record.

CPU

The CPU usage of data read and database write operations is about 10% -30%.

Memory

The memory consumption of data read and database write operations is about 200M-1G.

OSM_data_website

Planet OSM is the original source of all data, operated by the Open Street Map, but its download speed is limited.

It can be downloaded from other mirror data websites: Site List

You can also export the xml file of specific area by yourself: https://overpass-api.de/api/map?bbox=min_longitude,min_latitude,max_longitude,max_latitude .

Please use files in pbf format as much as possible, because of its significant advantages in space occupation and time-consuming of import.

License

Copyright (C) 2020 SUN JIAO (https://www.sunjiao.moe)
Apache License Version 2.0, January 2004
http://www.apache.org/licenses/

References & Credits

Thanks to spyhunter99/osmreader, I referred to the project, rewrote its core algorithms in kotlin, fixed the Osmosis not work problem, and added reverse geocoding feature.

My OSM Account

sun-jiao, mainly active in Wuhan.