About stdlib...
We believe in a future in which the web is a preferred environment for numerical computation. To help realize this future, we've built stdlib. stdlib is a standard library, with an emphasis on numerical and scientific computation, written in JavaScript (and C) for execution in browsers and in Node.js.
The library is fully decomposable, being architected in such a way that you can swap out and mix and match APIs and functionality to cater to your exact preferences and use cases.
When you use stdlib, you can be absolutely certain that you are using the most thorough, rigorous, well-written, studied, documented, tested, measured, and high-quality code out there.
To join us in bringing numerical computing to the web, get started by checking us out on GitHub, and please consider financially supporting stdlib. We greatly appreciate your continued support!
Locally-weighted polynomial regression via the LOWESS algorithm.
npm install @stdlib/stats-lowessAlternatively,
- To load the package in a website via a
scripttag without installation and bundlers, use the ES Module available on theesmbranch (see README). - If you are using Deno, visit the
denobranch (see README for usage intructions). - For use in Observable, or in browser/node environments, use the Universal Module Definition (UMD) build available on the
umdbranch (see README).
The branches.md file summarizes the available branches and displays a diagram illustrating their relationships.
To view installation and usage instructions specific to each branch build, be sure to explicitly navigate to the respective README files on each branch, as linked to above.
var lowess = require( '@stdlib/stats-lowess' );For input arrays and/or typed arrays x and y, the function returns an object holding the ordered input values x and smoothed values for y.
var x = [
4, 4, 7, 7, 8, 9, 10, 10, 10, 11, 11, 12, 12, 12, 12, 13, 13, 13, 13, 14,
14, 14, 14, 15, 15, 15, 16, 16, 17, 17, 17, 18, 18, 18, 18, 19, 19, 19, 20,
20, 20, 20, 20, 22, 23, 24, 24, 24, 24, 25
];
var y = [
2, 10, 4, 22, 16, 10, 18, 26, 34, 17, 28, 14, 20, 24, 28, 26, 34, 34, 46,
26, 36, 60, 80, 20, 26, 54, 32, 40, 32, 40, 50, 42, 56, 76, 84, 36, 46, 68,
32, 48, 52, 56, 64, 66, 54, 70, 92, 93, 120, 85
];
var out = lowess( x, y );
/* returns
{
'x': [
4,
4,
7,
7,
...,
24,
24,
24,
25
],
'y': [
~4.857,
~4.857,
~13.1037,
~13.1037,
...,
~79.102,
~79.102,
~79.102,
~84.825
]
}
*/The function accepts the following options:
- f: positive
numberspecifying the smoothing span, i.e., the proportion of points which influence smoothing at each value. Larger values correspond to more smoothing. Default:2/3. - nsteps:
numberof iterations in the robust fit (fewer iterations translates to faster function execution). If set to zero, the nonrobust fit is returned. Default:3. - delta: nonnegative
numberwhich may be used to reduce the number of computations. Default: 1/100th of the range ofx. - sorted:
booleanindicating if the input arrayxis sorted. Default:false.
By default, smoothing at each value is determined by 2/3 of all other points. To choose a different smoothing span, set the f option.
var x = [
4, 4, 7, 7, 8, 9, 10, 10, 10, 11, 11, 12, 12, 12, 12, 13, 13, 13, 13, 14,
14, 14, 14, 15, 15, 15, 16, 16, 17, 17, 17, 18, 18, 18, 18, 19, 19, 19, 20,
20, 20, 20, 20, 22, 23, 24, 24, 24, 24, 25
];
var y = [
2, 10, 4, 22, 16, 10, 18, 26, 34, 17, 28, 14, 20, 24, 28, 26, 34, 34, 46,
26, 36, 60, 80, 20, 26, 54, 32, 40, 32, 40, 50, 42, 56, 76, 84, 36, 46, 68,
32, 48, 52, 56, 64, 66, 54, 70, 92, 93, 120, 85
];
var out = lowess( x, y, {
'f': 0.2
});
/* returns
{
'x': [
4,
4,
7,
...,
24,
24,
25
],
'y': [
~6.03,
~6.03,
~12.68,
...,
~82.575,
~82.575,
~93.028
]
}
*/By default, three iterations of locally weighted regression fits are calculated after the initial fit. To set a different number of iterations for the robust fit, set the nsteps option.
var x = [
4, 4, 7, 7, 8, 9, 10, 10, 10, 11, 11, 12, 12, 12, 12, 13, 13, 13, 13, 14,
14, 14, 14, 15, 15, 15, 16, 16, 17, 17, 17, 18, 18, 18, 18, 19, 19, 19, 20,
20, 20, 20, 20, 22, 23, 24, 24, 24, 24, 25
];
var y = [
2, 10, 4, 22, 16, 10, 18, 26, 34, 17, 28, 14, 20, 24, 28, 26, 34, 34, 46,
26, 36, 60, 80, 20, 26, 54, 32, 40, 32, 40, 50, 42, 56, 76, 84, 36, 46, 68,
32, 48, 52, 56, 64, 66, 54, 70, 92, 93, 120, 85
];
var out = lowess( x, y, {
'nsteps': 20
});
/* returns
{
'x': [
4,
...,
25
],
'y': [
~4.857,
...,
~84.825
]
}
*/To save computations, set the delta option. For cases where one has a large number of (x,y)-pairs, carrying out regression calculations for all points is not likely to be necessary. By default, delta is set to 1/100th of the range of the values in x. In this case, if the values in x were uniformly scattered over the entire range, the locally weighted regression would be calculated at approximately 100 points. On the other hand, for small data sets with less than 100 observations, one can safely set the option to zero so calculations are made for each data point.
var x = [
4, 4, 7, 7, 8, 9, 10, 10, 10, 11, 11, 12, 12, 12, 12, 13, 13, 13, 13, 14,
14, 14, 14, 15, 15, 15, 16, 16, 17, 17, 17, 18, 18, 18, 18, 19, 19, 19, 20,
20, 20, 20, 20, 22, 23, 24, 24, 24, 24, 25
];
var y = [
2, 10, 4, 22, 16, 10, 18, 26, 34, 17, 28, 14, 20, 24, 28, 26, 34, 34, 46,
26, 36, 60, 80, 20, 26, 54, 32, 40, 32, 40, 50, 42, 56, 76, 84, 36, 46, 68,
32, 48, 52, 56, 64, 66, 54, 70, 92, 93, 120, 85
];
var out = lowess( x, y, {
'delta': 0.0
});
/* returns
{
'x': [
4,
...,
25
],
'y': [
~4.857,
...,
~84.825
]
}
*/If the elements of x are sorted in ascending order, set the sorted option to true.
var x = [
4, 4, 7, 7, 8, 9, 10, 10, 10, 11, 11, 12, 12, 12, 12, 13, 13, 13, 13, 14,
14, 14, 14, 15, 15, 15, 16, 16, 17, 17, 17, 18, 18, 18, 18, 19, 19, 19, 20,
20, 20, 20, 20, 22, 23, 24, 24, 24, 24, 25
];
var y = [
2, 10, 4, 22, 16, 10, 18, 26, 34, 17, 28, 14, 20, 24, 28, 26, 34, 34, 46,
26, 36, 60, 80, 20, 26, 54, 32, 40, 32, 40, 50, 42, 56, 76, 84, 36, 46, 68,
32, 48, 52, 56, 64, 66, 54, 70, 92, 93, 120, 85
];
var out = lowess( x, y, {
'sorted': true
});
/* returns
{
'x': [
4,
...,
25
],
'y': [
~4.857,
...,
~84.825
]
}
*/var randn = require( '@stdlib/random-base-randn' );
var Float64Array = require( '@stdlib/array-float64' );
var plot = require( '@stdlib/plot-ctor' );
var lowess = require( '@stdlib/stats-lowess' );
var x;
var y;
var i;
// Create some data...
x = new Float64Array( 100 );
y = new Float64Array( x.length );
for ( i = 0; i < x.length; i++ ) {
x[ i ] = i;
y[ i ] = ( 0.5*i ) + ( 10.0*randn() );
}
var opts = {
'delta': 0
};
var out = lowess( x, y, opts );
var h = plot( [ x, out.x ], [ y, out.y ] );
h.lineStyle = [ 'none', '-' ];
h.symbols = [ 'closed-circle', 'none' ];
h.view( 'stdout' );- Cleveland, William S. 1979. "Robust Locally and Smoothing Weighted Regression Scatterplots." Journal of the American Statistical Association 74 (368): 829–36. doi:10.1080/01621459.1979.10481038.
- Cleveland, William S. 1981. "Lowess: A program for smoothing scatterplots by robust locally weighted regression." American Statistician 35 (1): 54–55. doi:10.2307/2683591.
This package is part of stdlib, a standard library for JavaScript and Node.js, with an emphasis on numerical and scientific computing. The library provides a collection of robust, high performance libraries for mathematics, statistics, streams, utilities, and more.
For more information on the project, filing bug reports and feature requests, and guidance on how to develop stdlib, see the main project repository.
See LICENSE.
Copyright © 2016-2024. The Stdlib Authors.
