Provides a slimmed down concise interface for low level database queries and transactions (DBInterface) as well as a query builder to make it easier and more expressive to create queries (DBBuilderInterface). The interfaces are limited to avoid confusion/misuse and encourage fail-safe usage.
squirrelphp/connection is used for the underlying connection (and abstraction) handling starting with v2.0 (v1.3 and below had Doctrine DBAL as a dependency), what we add are an insertOrUpdate functionality (known as UPSERT), structured queries which are easier to write and read (and for which the query builder can be used), and the possibility to layer database concerns (like actual implementation, connections retries, performance measurements, logging, etc.). This library also smoothes over some differences between MySQL, Postgres and SQLite.
By default this library provides two layers, one dealing with the actual database connection (passing the queries, processing and returning the results) and one dealing with errors (DBErrorHandler). DBErrorHandler catches deadlocks and connection problems and tries to repeat the query or transaction, and it unifies the exceptions coming from the connection so the originating call to DBInterface is provided and the error can easily be found.
composer require squirrelphp/queries
- Setting up
- Database support
- DBInterface - low level interface
- DBBuilderInterface - higher level query builder
- BLOB handling for Postgres
- Guidelines to use this library
Use Squirrel\Queries\DBInterface as a type hint in your services for the low-level interface, and/or Squirrel\Queries\DBBuilderInterface for the query builder - the query builder is an expressive way to write structured (and not too complex) queries.
If you know Doctrine DBAL or PDO you should be able to use this library easily, while avoiding some of their complexities. You should especially have an extra look at structured queries and UPSERT, as these are additions to the low-level interface, helping you to make readable queries and taking care of your column field names and parameters automatically, making it easier to write secure queries.
For a solution which integrates easily with the Symfony framework, check out squirrelphp/queries-bundle, and for entity and repository support check out squirrelphp/entities and squirrelphp/entities-bundle.
If you want to assemble a DBInterface and DBBuilder yourself (even though you will likely want to use integration bundles instead), something like the following code can be a start:
use Squirrel\Connection\Config\Mysql;
use Squirrel\Connection\PDO\ConnectionPDO;
use Squirrel\Queries\DBBuilder;
use Squirrel\Queries\DBInterface;
use Squirrel\Queries\DB\ErrorHandler;
use Squirrel\Queries\DB\MySQLImplementation;
// Create a squirrel connection
$connection = new ConnectionPDO(
new Mysql(
host: 'localhost',
user: 'user',
password: 'password',
dbname: 'mydb',
),
);
// Create a MySQL implementation layer
$implementationLayer = new MySQLImplementation($connection);
// Create an error handler layer
$errorLayer = new ErrorHandler();
// Set implementation layer beneath the error layer
$errorLayer->setLowerLayer($implementationLayer);
// Rename our layered service - this is now our database object
$db = $errorLayer;
// $db is now useable and can be injected
// anywhere you need it. Typehint it with
// \Squirrel\Queries\DBInterface
$fetchEntry = function(DBInterface $db): array {
return $db->fetchOne('SELECT * FROM table');
};
$fetchEntry($db);
// A builder just needs a DBInterface to be created:
$queryBuilder = new DBBuilder($db);
// The query builder generates more readable queries, and
// helps your IDE in terms of type hints / possible options
// depending on the query you are doing
$entries = $queryBuilder
->select()
->fields([
'id',
'name',
])
->where([
'name' => 'Robert',
])
->getAllEntries();
// If you want to add more layers, you can create a
// class which implements DBRawInterface and includes
// the DBPassToLowerLayer trait and then just overwrite
// the functions you want to change, and then connect
// it to the other layers through setLowerLayer
// It is also a good idea to catch \Squirrel\Queries\DBException
// in your application in case of a DB error so it
// can be handled gracefullyThis library has support for the three main open-source databases:
- MySQL, all versions (at least 5.5+ is recommended)
- MariaDB, all versions (MariaDB behaves almost identical to MySQL)
- SQLite, all versions, although native UPSERT queries are only supported in SQLite 3.24+, the functionality is emulated in lower versions
- Postgres version 9.5 and above, because UPSERT queries were implemented in 9.5
The functionality in this library has been tested against real versions of these databases to make sure it works, although there might be edge cases which warrant adjustments. If you find any issues please report them.
For Postgres there are workarounds to make the BLOB type (called BYTEA in Postgres) easier to deal with, so handling BLOBs is almost as easy as with MySQL/SQLite.
You can write your own SELECT queries with given parameters using the select function, then getting results with the fetch function and clearing the results with the clear function:
$selectStatement = $db->select('SELECT fieldname FROM tablename WHERE restriction = ? AND restriction2 = ?', [5, 8]);
$firstRow = $db->fetch($selectStatement);
$db->clear($selectStatement);All ? are replaced by the array values in the second argument (those are the query parameters), if you have none you can omit the second argument:
$selectStatement = $db->select('SELECT fieldname FROM tablename WHERE restriction = 5 AND restriction2 = 8');It is recommended to use query parameters for any query data, even if it is fixed, because it is secure no matter where the data came from (like user input) and the charset or type does not matter (string, integer, boolean), which means SQL injections are not possible.
fetchOne and fetchAll can be used instead of the select function to directly retrieve exactly one row (fetchOne) or all rows (fetchAll) for a SELECT query, for example:
$firstRow = $db->fetchOne('SELECT fieldname FROM tablename WHERE restriction = ? AND restriction2 = ?', [5, 8]);$allRows = $db->fetchAll('SELECT fieldname FROM tablename WHERE restriction = ? AND restriction2 = ?', [5, 8]);Instead of writing raw SQL you can use a structured query:
$selectStatement = $db->select([
'field' => 'fieldname',
'table' => 'tablename',
'where' => [
'restriction' => 5,
'restriction2' => 8,
],
]);
$firstRow = $db->fetch($selectStatement);
$db->clear($selectStatement);In addition to being easier to write or process it also escapes field and table names, so the following string query is identical to the structured query above:
$selectStatement = $db->select('SELECT ´fieldname´ FROM ´tablename´ WHERE ´restriction´=? AND ´restriction2´=?', [5, 8]);How field names and tables are quoted depends on Doctrine and its abstractions, so the escape character can differ according to the database engine. The above shows how MySQL would be escaped.
Structured queries can replace almost all string select queries, even with multiple tables - this is a more complex example showing its options:
$selectStatement = $db->select([
'fields' => [
'fufumama',
'b.lalala',
'result' => 'a.setting_value',
'result2' => ':a.setting_value:+:b.blabla_value:',
],
'tables' => [
'blobs.aa_sexy a',
':blobs.aa_blubli: :b: LEFT JOIN :blobs.aa_blubla: :c: ON (:c.field: = :b.field5: AND :b.sexy: = ?)' => 5,
],
'where' => [
':a.field: = :b.field:',
'setting_id' => 'orders_xml_override',
'boring_field_name' => [5,3,8,13],
':setting_value: = ? OR :setting_value2: = ?' => ['one','two'],
],
'group' => [
'a.field',
],
'order' => [
'a.field' => 'DESC',
],
'limit' => 10,
'offset' => 5,
'lock' => true,
]);
$firstRow = $db->fetch($selectStatement);
$db->clear($selectStatement);This would be aquivalent to this string SELECT query (when using MySQL):
$selectStatement = $db->select('SELECT `fufumama`,`b`.`lalala`,`a`.`setting_value` AS "result",(`a`.`setting_value`+`b`.`blabla_value`) AS "result2" FROM `blobs`.`aa_sexy` `a`,`blobs`.`aa_blubli` `b` LEFT JOIN `blobs`.`aa_blubla` `c` ON (`c`.`field` = `b`.`field5` AND `b`.`sexy` = ?) WHERE (`a`.`field` = `b`.`field`) AND `setting_id`=? AND `boring_field_name` IN (?,?,?,?) AND (`setting_value` = ? OR `setting_value2` = ?) GROUP BY `a`.`field` ORDER BY `a`.`field` DESC LIMIT 10 OFFSET 5 FOR UPDATE', [5,'orders_xml_override',5,3,8,13,'one','two']);- If an expression contains something like :fieldname: it is assumed that it is a field or table name which will then be escaped. For simple WHERE restrictions or fields definitions field names are escaped automatically.
- You can use "field" if there is just one field, or "fields" for multiple fields. The same with "table" and "tables".
- If you set "lock" to true "FOR UPDATE" is added to the query, so the results are locked within the current transaction.
- The arguments are checked as much as possible and if an option/expression is not valid, a DBInvalidOptionException is thrown. This does not include SQL errors, as the SQL components know nothing of the allowed field names, table names or what constitutes a valid SQL expression.
You can pass a structured SELECT query directly to fetchOne and fetchAll to retrieve one or all results.
Custom INSERT, UPDATE and DELETE queries (or other custom queries) can be executed with the change function, implying that this query changes something in contrast to a SELECT query:
$rowsAffected = $db->change('UPDATE users SET first_name = ?, last_name = ?, login_number = login_number + 1 WHERE user_id = ?', [
'Liam', // first_name
'Henry', // last_name
5, // user_id
]);$rowsAffected = $db->change('DELETE FROM users WHERE user_id = ? AND first_name = ?', [
5, // user_id
'Liam', // first_name
]);$rowsAffected = $db->change('INSERT INTO users (user_id, first_name) SELECT user_id, first_name FROM users_backup');It is not recommended to use the change function except if you have no other choice - most queries can be done using the specific update, insert, insertOrUpdate and delete methods. Yet if you need subqueries or other advanced database functionality change is your only option.
Instead of using change queries, for updates you can use the specialized update method. An example:
$rowsAffected = $db->update('tablename', [
'fieldname' => 'string',
'locationId' => 5,
], [
'restriction' => 5,
'restriction2' => 8,
]);The first argument is the table name, the second argument the list of changes (SET clause in SQL) and the third argument is the list of WHERE restrictions. It is identical to the following string query:
$rowsAffected = $db->change('UPDATE ´tablename´ SET ´fieldname´=?,`locationId`=? WHERE ´restriction´=? AND ´restriction2´=?', ['string', 5, 5, 8]);You can only update one row at a time (according to the SQL standard), because the options and syntax for multi-table updates vary widely between MySQL, Postgres and SQLite and the overlap is almost non-existent.
insert does an INSERT query into one table, example:
$insertId = $db->insert('yourdatabase.yourtable', [
'tableId' => 5,
'column1' => 'Henry',
'other_column' => 'Liam',
], 'rowId');The first parameter is the table name, the second parameter is the column names and values to insert, and the optional third parameter defines the column name for which the database creates an automatic insert ID (called AUTOINCREMENT for MySQL and SQLite, called SERIAL for Postgres). If a table has no AUTOINCREMENT column, or if you set it explicitely, just do not provide the third parameter.
The above query will execute the following SQL query:
INSERT INTO `yourdatabase`.`yourtable` (`tableId`,`column1`,`other_column`) VALUES (?,?,?)with the values 5, Henry and Liam.
UPSERT (update-or-insert) queries are an addition to SQL, known under different queries in different database systems:
- MySQL and MariaDB implemented them as "INSERT ... ON DUPLICATE KEY UPDATE"
- PostgreSQL and SQLite as "INSERT ... ON CONFLICT (index) DO UPDATE"
- The ANSI standard knows them as MERGE queries, although those can be a bit different
In this library we call this type of query insertOrUpdate. Such a query tries to insert a row, but if the row already exists it does an update instead, and all of this is done as one atomic operation in the database. If implemented without an UPSERT query you would need at least an UPDATE and then possibly an INSERT query within a transaction to do the same. UPSERT exists to be a faster and easier solution.
PostgreSQL and SQLite need the specific column names which form a unique index in the table which is used to determine if an entry already exists or if a new entry is inserted. MySQL/MariaDB do this automatically, but for all database systems it is important to have a unique index involved in an UPSERT query.
The first two arguments for the insertOrUpdate function are identical to the normal insert function, the third defines the columns which form a unique index or primary key for the table in the database. And the last array is the list of updates to do if the entry already exists in the database, but it is optional.
An example could be:
$db->insertOrUpdate('users_visits', [
'userId' => 5,
'visit' => 1,
], [
'userId',
], [
':visit: = :visit: + 1'
]);For MySQL/MariaDB, this query would be converted to:
$db->change('INSERT INTO `users_visits` (`userId`,`visit`) VALUES (?,?) ON DUPLICATE KEY UPDATE `visit` = `visit` + 1', [5, 1]);For PostgreSQL/SQLite it would be:
$db->change('INSERT INTO "users_visits" ("userId","visit") VALUES (?,?) ON CONFLICT ("userId") DO UPDATE SET "visit" = "visit" + 1', [5, 1]);If no entry exists in users_visits, one is inserted with visit set to 1. But if an entry already exists an UPDATE with visit = visit + 1 is done instead.
Defining the UPDATE part is optional, and if left empty the UPDATE just does the same changes as the INSERT minus the index columns. Example:
$db->insertOrUpdate('users_names', [
'userId' => 5,
'firstName' => 'Jane',
], [
'userId',
]);This would INSERT with userId and firstName, but if the row already exists, it would just update firstName to Jane, so for MySQL/MariaDB it would be converted to:
$db->change('INSERT INTO `users_names` (`userId`,`firstName`) VALUES (?,?) ON DUPLICATE KEY UPDATE `firstName`=?, [5, 'Jane', 'Jane']);The most important thing to remember is that you need a unique or primary key index involved in an UPSERT query - so you need to know the indexing of the table.
The delete function offers a structured way of doing a DELETE query for one table. Example:
$rowsAffected = $db->delete('users_names', [
'userId' => 13,
]);The first argument is the name of the table, the second argument the WHERE restrictions. So as a pure string query this would be equal to:
$rowsAffected = $db->change('DELETE FROM `users_names` WHERE `userId`=?', [13]);The structured WHERE entries follow the same logic/rules as in the structured SELECT queries and the update method.
Just pass a callable/function to the transaction method and DBInterface will take care of the commit/rollback parts automatically and do its best to make the transaction succeed.
$db->transaction(function() {
// Do queries in here as much as you want, it will all be one transaction
// and committed as soon as this function ends
});An actual example might be:
$db->transaction(function() use ($db) {
$tableId = $db->insert('myTable', [
'tableName' => 'Henry',
], 'tableId');
$db->update('otherTable', [
'tableId' => $tableId,
], [
'tableName' => 'Henry',
]);
});If you call transaction within a transaction function, that function will just become part of the "outer transaction" and will fail or succeed with it:
$db->transaction(function() use ($db) {
$tableId = $db->insert('myTable', [
'tableName' => 'Henry',
], 'tableId');
// This still does exactly the same as in the previous example, because the
// function will be executed without a "new" transaction being started,
// the existing one just continues
$db->transaction(function() use ($db, $tableId)) {
// If this fails, then the error handler will attempt to repeat the outermost
// transaction function, which is what you would want / expect, so it starts
// with the Henry insert again
$db->update('otherTable', [
'tableId' => $tableId,
], [
'tableName' => 'Henry',
]);
});
});If there is a deadlock or connection problem, the error handler (DBErrorHandler) will roll back the transaction and attempt to retry it 10 times, with increasing wait times inbetween. Only if there are 10 failures within about 30 seconds will the exception be escalated with a DBException.
If you want to pass arguments to $func, this would be an example (you can also add them to the use part):
$db->transaction(function(string $table, string $tableName) use ($db) {
$tableId = $db->insert('myTable', [
'tableName' => 'Henry',
], 'tableId');
$db->update('otherTable', [
'tableId' => $tableId,
], [
'tableName' => $tableName,
]);
}, 'myTable', 'Henry');When using SELECT queries within a transaction you should always remember that the results are usually not locked (so not protected from UPDATE or DELETE), except if you apply "... FOR UPDATE" (in a string SELECT query) or by setting lock to true in a structured SELECT.
If you want to be safe it is recommended to quote all identifiers (table names and column names) with the DBInterface quoteIdentifier function for non-structured select and change queries.
For insert and insertOrUpdate the quoting is done for you, and for structured queries most of the quoting is done for you, except if you use an expression, where you can just use colons to specify a table or column name.
If you quote all identifiers, then changing database systems (where different reserved keywords might exist) or upgrading a database (where new keywords might be reserved) is easier.
$rowsAffected = $db->change('UPDATE ' . $db->quoteIdentifier('users') . ' SET ' . $db->quoteIdentifier('first_name') . ')=? WHERE ' . $db->quoteIdentifier('user_id') . '=?', ['Sandra', 5]);When executing custom change or string select queries it can be tedious to escape every identifier with quoteIdentifier. Instead you can surround all table names and column names with colons in your query and process them with quoteExpression.
This means the only colons in the expression must be for table names and columns names, otherwise the results can become unpredictable. Regularly you would never use colons in a SQL query, but make sure to not accidentally include content in your queries which might contain a colon - if you separate the query from the values this is not an issue.
$rowsAffected = $db->change($db->quoteExpression('UPDATE :users: SET :first_name:=? WHERE :user_id:=?'), ['Sandra', 5]);DBBuilderInterface offers the following functions:
- count
- select
- insert
- update
- insertOrUpdate (= UPSERT)
- delete
- transaction (to do a function within a transaction)
- getDBInterface (to get the underlying DBInterface object)
All except the last two return a builder object which helps you easily create a query and get the results. Compared to DBInterface you do not have to remember what data can be contained in a structured query - your IDE will suggest whatever is available.
Looking at some examples should make the usage quite clear - here are some for each of the 6 builder functions:
// $usersNumber will be an integer
$usersNumber = $dbBuilder
->count()
->inTables([
'users u',
'users_addresses a',
])
->where([
':u.userId: = :a.userId:',
'u.zipCode' => 33769,
])
->getNumber();An easy way to just count the number of rows.
Select queries can become the most complex, so they have many options - here is an example with all of them (many are optional though!):
$selectQuery = $dbBuilder
->select()
->fields([
'u.userId',
'name' => 'a.firstName',
])
->inTables([
'users u',
'users_addresses a',
])
->where([
':u.userId: = :a.userId:',
'u.zipCode' => 33769,
])
->groupBy([
'u.userId',
])
->orderBy([
'u.createDate',
])
->limitTo(3)
->startAt(0)
->blocking();
foreach ($selectQuery as $result) {
echo $result['userId'] . ' => ' . $result['name'];
}The above query takes advantage that each SELECT query builder can be iterated over. As soon as the foreach loop starts the query is executed and one entry after the other is retrieved.
If you want to retrieve all results at once (because you know you need them anyway), this is another option:
$userResults = $dbBuilder
->select()
->fields([
'u.userId',
'name' => 'a.firstName',
])
->inTables([
'users u',
'users_addresses a',
])
->where([
':u.userId: = :a.userId:',
'u.zipCode' => 33769,
])
->groupBy([
'u.userId',
])
->orderBy([
'u.createDate',
])
->limitTo(3)
->startAt(0)
->blocking()
->getAllEntries();
foreach ($userResults as $result) {
echo $result['userId'] . ' => ' . $result['name'];
}Or if you only need one entry:
$result = $dbBuilder
->select()
->fields([
'u.userId',
'name' => 'a.firstName',
])
->inTables([
'users u',
'users_addresses a',
])
->where([
':u.userId: = :a.userId:',
'u.zipCode' => 33769,
])
->groupBy([
'u.userId',
])
->orderBy([
'u.createDate',
])
->limitTo(3)
->startAt(0)
->blocking()
->getOneEntry();
echo $result['userId'] . ' => ' . $result['name'];Note that you can use field instead of fields and inTable instead of inTables if you want to pass only one value (as a string), and that you can pass a string to groupBy and orderBy if you only want to use one string value.
There are four options to get the data from a select query builder:
- getIterator, to get an object you can iterate over (foreach) so you can get one result after the other - this is implicitely used in the first example by putting the builder into the foreach loop, as the builder implements IteratorAggregate
- getAllEntries, to retrieve an array with all the entries at once, which was the second example
- getOneEntry, to just get exactly one entry, used in the third example
- getFlattenedFields, which means the results are "flattened", with its type specific variants
getFlattenedIntegerFields,getFlattenedFloatFields,getFlattenedStringFieldsandgetFlattenedBooleanFields
getFlattenedFields can be useful for something like this:
$userIds = $dbBuilder
->select()
->field('userId')
->inTable('users')
->where([
'u.zipCode' => 33769,
])
->getFlattenedFields();
foreach ($userIds as $userId) {
// Do something which each $userId here
}Instead of a list of arrays each with a field "userId", the results are flattened and directly return a list of user IDs. Flattening is mostly useful for IDs or other simple lists of values, where you just need one array instead of an array of an array.
You can enforce a type on the flattened fields by using getFlattenedIntegerFields, getFlattenedFloatFields, getFlattenedStringFields or getFlattenedBooleanFields. This is recommended in order to be more type safe and make it easier for static analyzers/IDEs to understand your code. This library will then attempt to convert all values to the requested type and throw a DBInvalidOptionException if there is any ambiguity.
$newUserIdFromDatabase = $dbBuilder
->insert()
->inTable('users')
->set([
'userName' => 'Kjell',
])
->writeAndReturnNewId('rowId');You can use writeAndReturnNewId if you are expecting/needing an insert ID (you need to specify the column name of the insert ID), or just write to insert the entry without a return value.
$rowsAffected = $dbBuilder
->update()
->inTable('users')
->set([
'lastLoginDate' => time(),
':visits: = :visits: + 1',
])
->where([
'userId' => 33,
])
->writeAndReturnAffectedNumber();You can use writeAndReturnAffectedNumber if you are interested in the number of affected/changed rows, or write if you do not need that information. Another option which is not shown above is orderBy.
If you want to update all rows in a table (and use no WHERE restrictions), you have to specifically state that:
$rowsAffected = $dbBuilder
->update()
->inTable('users')
->set([
'lastLoginDate' => time(),
':visits: = :visits: + 1',
])
->confirmNoWhereRestrictions()
->writeAndReturnAffectedNumber();This explicit confirmation clause is needed to avoid executing queries where the where part was omitted by accident, which is a common mistake when writing/executing queries.
This makes the insertOrUpdate functionality in DBInterface a bit easier to digest, using the same information:
$insertBuilder
->insertOrUpdate()
->inTable('users_visits')
->set([
'userId' => 5,
'visits' => 1,
])
->index([
'userId',
])
->setOnUpdate([
':visits: = :visits: + 1',
])
->write();Only write is available to execute the query.
For MySQL, this query would be converted to:
INSERT INTO `users_visits` (`userId`,`visit`) VALUES (?,?) ON DUPLICATE KEY UPDATE `visit` = `visit` + 1With the values 5 and 1 as query parameters.
For PostgreSQL/SQLite it would be:
INSERT INTO "users_visits" ("userId","visit") VALUES (?,?) ON CONFLICT ("userId") DO UPDATE SET "visit" = "visit" + 1If no entry exists in users_visits, one is inserted with visit set to 1. But if an entry already exists an UPDATE with visit = visit + 1 is done instead.
$rowsAffected = $dbBuilder
->delete()
->inTable('users')
->where([
'userId' => 33,
])
->writeAndReturnAffectedNumber();You can use writeAndReturnAffectedNumber if you are interested in the number of affected/changed rows, or write if you do not need that information.
If you want to delete all rows in a table (and use no WHERE restrictions), you have to specifically state that:
$rowsAffected = $dbBuilder
->delete()
->inTable('users')
->confirmNoWhereRestrictions()
->writeAndReturnAffectedNumber();This explicit confirmation clause is needed to avoid executing queries where the where part was omitted by accident, which is a common mistake when writing/executing queries.
The transaction function works the same as the one in DBInterface - in fact, DBBuilderInterface just passes it as-is to DBInterface.
For simple column names to values within any queries, you can just use the name to value syntax like you do in PHP:
$user = $dbBuilder
->select()
->inTable('users')
->where([
'user_id' => $userId, // user_id must be equal to $userId
])
->getOneEntry();
// $user now contains all table column and values:
echo $user['user_id'];The values are separated from the query to ensure safety, and the table names and column names are quoted for you.
If you want to use more complex expressions, you are free to do so:
$user = $dbBuilder
->select()
->inTable('users')
->where([
':user_id: BETWEEN ? AND ?' => [15, 55],
':create_date: > ?' => time() - 86400,
])
->getOneEntry();In these cases make sure to surround all table column names / field names and table names with colons, so the library can escape them. You can use any SQL syntax you want, and each entry in a WHERE clause is connected by AND - so the WHERE part is converted to the following by the library:
... WHERE (`user_id` BETWEEN ? AND ?) AND (`create_date` > ?) ...For custom expressions every expression is surrounded by brackets, to make sure they do not influence each other, and the parameters are sent separately from the query, in this case: [15, 55, time() - 86400]
This syntax is used consistently for any data passed to the library, and where that type of syntax can be translated to valid SQL. So an UPDATE query could look like this:
$rowsAffected = $dbBuilder
->update()
->inTable('users')
->set([
'last_login_date' => time(),
':visits: = :visits: + 1',
':full_name: = CONCAT(:first_name:,:last_name:)',
':balance: = :balance: + ?' => $balanceIncrease,
])
->where([
'user_id' => 33,
':last_login_date: < ?' => time()-86400,
])
->writeAndReturnAffectedNumber();This should make it easy to read and write queries, even if you don't know much SQL, and you don't have to think about separating the query and the parameters yourself - the library is doing it for you.
For MySQL and SQLite retrieving or inserting/updating BLOBs (Binary Large Objects) works just the same as with shorter/non-binary string fields. Postgres needs some adjustments, but these are streamlined by this library:
- For SELECT queries, streams returned by Postgres are automatically converted into strings, mimicking how MySQL and SQLite are doing it
- For INSERT/UPDATE queries, you need to wrap BLOB values with an instance of LargeObject provided by
squirrelphp/connection.
So the following works if file_data is a BYTEA field in Postgres:
use Squirrel\Connection\LargeObject;
$rowsAffected = $dbBuilder
->update()
->inTable('files')
->set([
'file_name' => 'someimage.jpg',
'file_data' => new LargeObject(file_get_contents('someimage.jpg')),
])
->where([
'file_id' => 33,
])
->write();And retrieving binary data is seamless:
$file = $dbBuilder
->select()
->inTable('files')
->where([
'file_id' => 33,
])
->getOneEntry();
// Use file_data in some way, like showing or writing it - it is a regular string
echo $file['file_data'];You can use the LargeObject class with your MySQL/SQLite UPDATEs and INSERTs too, to make your code work across all systems, although it will work even without it. Only Postgres explicitely needs it for BYTEA columns.
To use this library to its fullest it is recommended to follow these guidelines:
The easiest and safest option is to use the builder (DBBuilderInterface) - with an IDE you will have an easy time completing your queries while separating the query from the data is very easy and almost automatic.
If you want to use DBInterface instead, use structured SELECT and UPDATE queries, as they are easier to write and read and make separating the query from the data easier, while still containing basically the same information as a "pure" string query, so use them instead of writing SQL queries on your own.
INSERT, UPSERT und DELETE queries are already structured because their focus is limited. With these five query types you should be able to handle 99% of queries.
For your application security, separating the query from the data is very important / helpful. Instead of doing a query like this:
$rowsAffected = $db->change('UPDATE sessions SET time_zone = \'Europe/Zurich\' WHERE session_id = \'zzjEe2Jpksrjxsd05m1tOwnc7LJNV4sV\'');Do it like this: (or use a structured query, see the tip above!)
$rowsAffected = $db->change('UPDATE sessions SET time_zone = ? WHERE session_id = ?', [
'Europe/Zurich',
'zzjEe2Jpksrjxsd05m1tOwnc7LJNV4sV',
]);There are many advantages to separating the query from its data:
- You can safely use variables coming from a form/user, because SQL injections are impossible
- Using ? placeholders is much easier than quoting/escaping data, and it does not matter if the data is a string or an int or something else
- Queries become shorter and more readable
- Using a different database system becomes easier, as you might use
"to wrap strings in MySQL, while you would use'in PostgreSQL ("is used for identifiers). If you use ? placeholders you do not need to use any type of quotes for the data, so your queries become more universal.
Avoid complicated queries if at all possible. Queries become increasingly complicated if:
- more than two tables are involved (or more than one for queries which change something)
- GROUP BY or HAVING is used
- subqueries are used
- database specific features are used (stored procedures, triggers, views, etc.)
It is often tempting to solve many problems with one query, but the downsides are plentiful:
- Performance decreases the more complex a query becomes
- Multiple short queries can be cached and load-balanced better than one big query
- Porting a complex query to a different database system might necessitate many changes
- Understanding and changing complex queries is a lot harder, so errors are more likely
Sometimes a complex query can make more sense, but it should be the rare exception for less than 1% of cases.
squirrelphp/queries-bundle is an integration of this library into Symfony, so you can get started quickly.
squirrelphp/entities is a library built on top of squirrelphp/queries and offers support for typed entities and repositories while following all the above guidelines.
squirrelphp/entities-bundle is the Symfony bundle integrating entities and repositories into a Symfony project.