Skip to content

A repository for 3D models created with OpenSCAD--a programmer's CAD software--for personal or public use. Some of these models are only useful to yours truly; others may be useful to you as well.

Notifications You must be signed in to change notification settings

spikespaz/threedeethings

Repository files navigation

OpenSCAD Things

Repository for my OpenSCAD files of things I've created.

A pretty standard 2 centimeter cubed prism with a missing corner for testing your 3D printer.

A parametric block that can be attached to a wall to hold three arrows up for display. The shape is calculated using real life measurements of the arrows, desired distance between fletching, and other variables that make this print exactly perfect.

Customizable tool used to delid a processor before applying liquid metal TIM. Use the parameters to make this fit your processor. After printing, place your processor in the tray of the larger printed half. Lay the top cover over the IHS of the processor with the cutout closer to the wider side of the cover flush against the side of the CPU's IHS, leaving a gap on either side of the two parts. The tops of each piece should be flush with each other. Use a C-clamp or equivalent to gently sandwich the CPU between the printed parts, enough pressure to hold them in place when the ends of the tool are pressed together, sliding the IHS off the die.

About

A repository for 3D models created with OpenSCAD--a programmer's CAD software--for personal or public use. Some of these models are only useful to yours truly; others may be useful to you as well.

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published