Skip to content

Commit

Permalink
Fix host networking in containers
Browse files Browse the repository at this point in the history
  • Loading branch information
@ehfd
ehfd authored Nov 2, 2024
1 parent 322a1a0 commit c608734
Show file tree
Hide file tree
Showing 2 changed files with 11 additions and 11 deletions.
6 changes: 3 additions & 3 deletions README.md
View file
Original file line number Diff line number Diff line change
Expand Up @@ -99,9 +99,9 @@ All these ports must be exposed to the internet if you need access over the inte
<details markdown>
<summary>Open Section</summary>

The Selkies-GStreamer WebRTC HTML5 interface will likely just start working if you open UDP and TCP ports 49152–65535 in your host server network and add `--network host` to the above `docker run` command, or `network_mode: 'host'` in `docker-compose.yml`. Note that running multiple desktop containers in one host under this configuration may be problematic and is not recommended. When deploying multiple containers, you must also pass a new `DISPLAY` environment variable such as `-e DISPLAY=:22` into the container, that is not used with any other X11 server or container in the same host.
The Selkies-GStreamer WebRTC HTML5 interface will likely just start working if you open UDP and TCP ports 49152–65535 in your host server network and add `--network=host` to the above `docker run` command, or `network_mode: 'host'` in `docker-compose.yml`. Note that running multiple desktop containers in one host under this configuration may be problematic and is not recommended. When deploying multiple containers, you must also pass new environment variables such as `-e DISPLAY=:22`, `-e NGINX_PORT=8082`, `-e SELKIES_PORT=8083`, and `-e SELKIES_METRICS_HTTP_PORT=9083` into the container, all not overlapping with any other X11 server or container in the same host.

However, host networking may be restricted or not be desired because of security reasons or when deploying multiple desktop containers in one host. If not available, check if the container starts working after omitting `--network host`.
However, host networking may be restricted or not be desired because of security reasons or when deploying multiple desktop containers in one host. If not available, check if the container starts working after omitting `--network=host`.

</details>

Expand Down Expand Up @@ -193,7 +193,7 @@ In most cases when either of your server or client has a permissive firewall, th

**Read the last steps of each Docker/Kubernetes instruction to use an internal TURN server. Alternatively, read the below sections.**

For an easy fix to when the signaling connection works, but the WebRTC connection fails, **open UDP and TCP ports 49152–65535 in your host server network** (or use Full Cone NAT in your network router/infrastructure settings), then add the option `--network host` to your Docker command (or `network_mode: 'host'` in `docker-compose.yml`), or uncomment `hostNetwork: true` in your `egl.yml` file when using Kubernetes (note that your cluster may have not allowed this, resulting in an error). This exposes your container to the host network, which disables network isolation. Note that running multiple desktop containers in one host under this configuration may be problematic and is not recommended. You must also pass a new `DISPLAY` environment variable such as `-e DISPLAY=:22` into the container, that is not used with any other X11 server or container in the same host.
For an easy fix to when the signaling connection works, but the WebRTC connection fails, **open UDP and TCP ports 49152–65535 in your host server network** (or use Full Cone NAT in your network router/infrastructure settings), then add the option `--network=host` to your Docker command (or `network_mode: 'host'` in `docker-compose.yml`), or uncomment `hostNetwork: true` in your `egl.yml` file when using Kubernetes (note that your cluster may have not allowed this, resulting in an error). This exposes your container to the host network, which disables network isolation. Note that running multiple desktop containers in one host under this configuration may be problematic and is not recommended. You must also pass new environment variables such as `-e DISPLAY=:22`, `-e NGINX_PORT=8082`, `-e SELKIES_PORT=8083`, and `-e SELKIES_METRICS_HTTP_PORT=9083` into the container, all not overlapping with any other X11 server or container in the same host.

If this does not fix the connection issue (normally when the host is behind another additional firewall), you cannot use this fix for security or technical reasons, or when deploying multiple desktop containers in one host, read the below text to set up an external [TURN server](https://github.com/selkies-project/selkies-gstreamer/blob/main/docs/firewall.md#turn-server).

Expand Down
16 changes: 8 additions & 8 deletions selkies-gstreamer-entrypoint.sh
View file
Original file line number Diff line number Diff line change
Expand Up @@ -54,8 +54,8 @@ echo "# Selkies-GStreamer NGINX Configuration
server {
access_log /dev/stdout;
error_log /dev/stderr;
listen 8080 $(if [ \"$(echo ${SELKIES_ENABLE_HTTPS} | tr '[:upper:]' '[:lower:]')\" = \"true\" ]; then echo -n "ssl"; fi);
listen [::]:8080 $(if [ \"$(echo ${SELKIES_ENABLE_HTTPS} | tr '[:upper:]' '[:lower:]')\" = \"true\" ]; then echo -n "ssl"; fi);
listen ${NGINX_PORT:-8080} $(if [ \"$(echo ${SELKIES_ENABLE_HTTPS} | tr '[:upper:]' '[:lower:]')\" = \"true\" ]; then echo -n "ssl"; fi);
listen [::]:${NGINX_PORT:-8080} $(if [ \"$(echo ${SELKIES_ENABLE_HTTPS} | tr '[:upper:]' '[:lower:]')\" = \"true\" ]; then echo -n "ssl"; fi);
ssl_certificate ${SELKIES_HTTPS_CERT-/etc/ssl/certs/ssl-cert-snakeoil.pem};
ssl_certificate_key ${SELKIES_HTTPS_KEY-/etc/ssl/private/ssl-cert-snakeoil.key};
$(if [ \"$(echo ${SELKIES_ENABLE_BASIC_AUTH} | tr '[:upper:]' '[:lower:]')\" != \"false\" ]; then echo "auth_basic \"Selkies\";"; echo -n " auth_basic_user_file ${XDG_RUNTIME_DIR}/.htpasswd;"; fi)
Expand All @@ -74,7 +74,7 @@ server {
client_max_body_size 10M;
proxy_pass http$(if [ \"$(echo ${SELKIES_ENABLE_HTTPS} | tr '[:upper:]' '[:lower:]')\" = \"true\" ]; then echo -n "s"; fi)://localhost:8081;
proxy_pass http$(if [ \"$(echo ${SELKIES_ENABLE_HTTPS} | tr '[:upper:]' '[:lower:]')\" = \"true\" ]; then echo -n "s"; fi)://localhost:${SELKIES_PORT:-8081};
}
location /turn {
Expand All @@ -86,7 +86,7 @@ server {
client_max_body_size 10M;
proxy_pass http$(if [ \"$(echo ${SELKIES_ENABLE_HTTPS} | tr '[:upper:]' '[:lower:]')\" = \"true\" ]; then echo -n "s"; fi)://localhost:8081;
proxy_pass http$(if [ \"$(echo ${SELKIES_ENABLE_HTTPS} | tr '[:upper:]' '[:lower:]')\" = \"true\" ]; then echo -n "s"; fi)://localhost:${SELKIES_PORT:-8081};
}
location /ws {
Expand All @@ -106,7 +106,7 @@ server {
client_max_body_size 10M;
proxy_pass http$(if [ \"$(echo ${SELKIES_ENABLE_HTTPS} | tr '[:upper:]' '[:lower:]')\" = \"true\" ]; then echo -n "s"; fi)://localhost:8081;
proxy_pass http$(if [ \"$(echo ${SELKIES_ENABLE_HTTPS} | tr '[:upper:]' '[:lower:]')\" = \"true\" ]; then echo -n "s"; fi)://localhost:${SELKIES_PORT:-8081};
}
location /webrtc/signalling {
Expand All @@ -126,7 +126,7 @@ server {
client_max_body_size 10M;
proxy_pass http$(if [ \"$(echo ${SELKIES_ENABLE_HTTPS} | tr '[:upper:]' '[:lower:]')\" = \"true\" ]; then echo -n "s"; fi)://localhost:8081;
proxy_pass http$(if [ \"$(echo ${SELKIES_ENABLE_HTTPS} | tr '[:upper:]' '[:lower:]')\" = \"true\" ]; then echo -n "s"; fi)://localhost:${SELKIES_PORT:-8081};
}
location /metrics {
Expand All @@ -153,8 +153,8 @@ rm -rf "${HOME}/.cache/gstreamer-1.0"
# Start the Selkies-GStreamer WebRTC HTML5 remote desktop application
selkies-gstreamer \
--addr="localhost" \
--port="8081" \
--port="${SELKIES_PORT:-8081}" \
--enable_basic_auth="false" \
--enable_metrics_http="true" \
--metrics_http_port="9081" \
--metrics_http_port="${SELKIES_METRICS_HTTP_PORT:-9081}" \
$@

0 comments on commit c608734

Please sign in to comment.