Skip to content

scalyr/scalyr-tool

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

scalyr-tool

Command-line tool for accessing Scalyr services. The following commands are currently supported:

Installation

Simply download the script file and make it executable. For instance:

curl https://raw.githubusercontent.com/scalyr/scalyr-tool/master/scalyr > scalyr
chmod u+x scalyr
mv scalyr (some directory on your command path)

You also need to make your Scalyr API tokens available to the tool. You can specify the token on the command line using the --token argument. However, it is more convenient to store your tokens in environment variables. This also keeps the tokens out of your console window and command history. On Unix systems, you can add the following to a file like .bash_profile:

export scalyr_readlog_token='XXX'
export scalyr_readconfig_token='YYY'
export scalyr_writeconfig_token='ZZZ'

The values for XXX, YYY, and ZZZ can be found at scalyr.com/keys -- look for "Read Logs", "Read Config", and "Write Config" tokens, respectively.

Setting a custom Scalyr server can be done using the --server argument but also via environment variable:

export scalyr_server='https://eu.scalyr.com'

After adding these to .bash_profile, make sure to also paste them into your current console session, so that they take effect immediately. Alternatively, run source ~/.bash_profile.

Querying logs

The "query" command allows you to search and filter your logs, or simply retrieve raw log data. The capabilities are similar to the regular log view, though you can retrieve more data at once and have several output format options.

Here are some usage examples:

# Display the last 10 log records
scalyr query

# Display the last 100 log records, showing only timestamp, severity, and message.
# (Timestamp and severity are always displayed.)
scalyr query --count=100 --columns='timestamp,severity,message'

# Display the first 10 log records beginning at 3:00 PM today, from host100.
scalyr query '$serverHost="host100"' --start='3:00 PM'

# Display the last 1000 entries in the log tagged as source=accessLog. Print only the status
# and path, in CSV format.
scalyr query '$source="accessLog"' --output=csv --columns='status,uriPath' --count=1000

Complete argument list:

scalyr query [filter] [options...]
    The filter specifies which log records to return. It uses the same syntax as the "Expression"
    field in the [log view](https://www.scalyr.com/events?mode=log).

--start=xxx
    Specify the beginning of the time range to query. Uses the same syntax as the "Start" field in
    the log view. Defaults to 1 day ago, or to 1 day before the end time if an end time is given.
--end=xxx
    Specify the end of the time range to query. Uses the same syntax as the "End" field in the log
    view. Defaults to the current time, or to 1 day after the start time if a start time is given.
--count=nnn
    How many log records to retrieve, from 1 to 5000. Defaults to 10.
--mode=head|tail
    Whether to display log records from the start or end of the time range. Defaults to head if a
    start time is given, otherwise to tail.
--columns="..."
    Which log attributes to display. Used mainly for logs for which you have specified a parser to
    extract attributes from the raw text. Specify one or more attribute names, separated by commas.
--output=multiline|singleline|csv|json|json-pretty
    How to display the log records (see below).
--version
    Prints the current version number of this tool.
--priority=high|low
    Specifies the execution priority for this query; defaults to "high". Use "low" for scripted
    operations where a delay of a second or so is acceptable. Rate limits are tighter for high-
    priority queries.
--token=xxx
    Specify the API token. For this command, should be a "Read Logs" token.
--verbose
    Writes detailed progress information to stderr.
--proxy=<ip>:<port>
    An address to connect through when using a proxy. If not set will also take the value from one of the following
    environment variables if any are set: http_proxy, HTTP_PROXY, https_proxy, HTTPS_PROXY

Output formats

By default, the query command outputs log records in a fairly verbose format designed for manual viewing. You can get something more like a classic log view by specifying a columns list, as shown in one of the examples above.

The 'singleline' output option is similar to the default, but places all of a record's attributes on a single line. This is denser, but can be harder to read.

The 'csv' output option emits one line per log record, in Excel comma-separated-value format (with CRLF as the line separator, per the spec). To use this option, you must specify the --columns argument.

The 'json-pretty' output option also emits the JSON response from the server, but prettyprinted.

Usage limits

Your command line and API queries are limited to 30,000 milliseconds of server processing time, replenished at 36,000 milliseconds per hour. If you exceed this limit, your queries will be intermittently refused. (Your other uses of Scalyr, such as log uploading or queries via the web site, will not be impacted.) If you need a higher limit, drop us a line at [email protected].

Power Queries

The "power-query" command allows you to execute a PowerQuery. The capabilities are similar to the regular PowerQuery, though you can retrieve more data at once and have several output format options.

Here are some usage examples:

# Display log volume summary by forlogfile for the last 24 hours
scalyr power-query "tag='logVolume' metric='logBytes' | group sum(value) by forlogfile" --start="24h"

# Display a table of requests, errors and error rate for the last 7 days, in pretty-printed JSON
scalyr power-query "dataset = 'accesslog' | group requests = count(), errors = count(status == 404) \
by uriPath | let rate = errors / requests | filter rate > 0.01 | sort -rate" --start="7d" --end="0d" \
--output=json-pretty

Complete argument list:

scalyr power-query [query] [options...]
    The query specifies the PowerQuery. It uses the same syntax as the "PowerQueries"
    page which is documented [here](https://app.scalyr.com/help/power-queries).

--start=xxx
    Specify the beginning of the time range to query. Uses the same syntax as the "Start" field in
    the PowerQueries page. This field is required.
--end=xxx
    Specify the end of the time range to query. Uses the same syntax as the "End" field in the PowerQueries page.
    Defaults to 1 day after the start time if a start time is given.
--output=csv|json|json-pretty
    How to display the log records (see below).
--version
    Prints the current version number of this tool.
--priority=high|low
    Specifies the execution priority for this query; defaults to "high". Use "low" for scripted
    operations where a delay of a second or so is acceptable. Rate limits are tighter for high-
    priority queries.
--token=xxx
    Specify the API token. For this command, should be a "Read Logs" token.
--verbose
    Writes detailed progress information to stderr.
--proxy=<ip>:<port>
    An address to connect through when using a proxy. If not set will also take the value from one of the following
    environment variables if any are set: http_proxy, HTTP_PROXY, https_proxy, HTTPS_PROXY

Output formats

By default, the power-query command outputs in 'csv' format, which emits one line per log record, in Excel comma-separated-value format (with CRLF as the line separator, per the spec).

The 'json' output option, not surprisingly, emits a JSON response.

The 'json-pretty' output option also emits the JSON response from the server, but prettyprinted.

Usage limits

Your command line and API queries are limited to 30,000 milliseconds of server processing time, replenished at 36,000 milliseconds per hour. If you exceed this limit, your queries will be intermittently refused. (Your other uses of Scalyr, such as log uploading or queries via the web site, will not be impacted.) If you need a higher limit, drop us a line at [email protected].

Tailing logs

The 'tail' command is similar to the 'query' command, except it runs continually, printing query results to stdout.

Here are some usage examples:

# Display a live tail of all log records
scalyr tail

# Display a live tail of all log records from host100.
scalyr tail '$serverHost="host100"'

# Display a live tail of all log records containing the text [WARN]
#   Note: the [] need to be quoted to be processed as text by Scalyr.
#   You also need to quote/escape the quotes so they are not eaten by the shell
scalyr tail '"[WARN]"'

# Display a live tail of log messages, including attributes
scalyr tail --output multiline

Complete argument list:

scalyr tail [filter] [options...]
    The filter specifies which log records to return. It uses the same syntax as the "Expression"
    field in the [log view](https://www.scalyr.com/events?mode=log).

--lines K,
-n K
    Output the previous K lines when starting the tail.  Defaults to 10.

--output multiline|singleline|messageonly
    Similar to the multiline and singleline options for the 'query' command, but also has a 'messageonly'
    mode that will only display the raw log message, and not any additional attributes.
    Defaults to 'messageonly'.

Usage limits

The 'tail' command is currently restricted to read a maximum of 1,000 log records per 10 seconds. Additionally, tails will automatically expire after 10 mins. Please contact [email protected] if you require an increase to these limits.

Server clocks

If the clocks on the servers sending log messages to Scalyr are significantly out of sync then some messages may not appear in the live tail. For example, if you send us a new log message with a timestamp old enough that it's not in the 1,000 most recent messages when it arrives at the Scalyr servers, then it will not be displayed by the live tail tool.

Fetching numeric data

The "numeric-query" command allows you to retrieve numeric data, e.g. for graphing. You can count the rate of events matching some criterion (e.g. error rate), or retrieve a numeric field (e.g. response size).

A numeric query is equivalent to a timeseries-query with argument --no-create-summaries and without --only-use-summaries. If you will be invoking the same query repeatedly (e.g. in a script), you may want to use the timeseries query command rather than numeric-query.

The commands take the same options and return the same data, but for timeseries-query invocations without --no-create-summaries we create a timeseries on the backend for each unique filter/function pair.
This query will execute near-instantaneously, and avoid consuming your account's query budget (see below).

Here are some usage examples:

# Count the rate (per second) of occurrences of "/login" in all logs, in each of the last 24 hours
scalyr numeric-query '"/login"' --start 24h --buckets 24

# Display the average response size of all requests in the last hour
scalyr numeric-query '$dataset="accesslog"' --function 'bytes' --start 1h

Complete argument list:

scalyr numeric-query [filter] --start xxx [options...]
    The filter specifies which log records to process. It uses the same syntax as the "Expression"
    field in the [log view](https://www.scalyr.com/events?mode=log).

--function=xxx
    The value to compute from the matching events. You can use any function listed in
    https://www.scalyr.com/help/query-language#graphFunctions, except for fraction(expr). For
    example: 'mean(x)' or 'median(responseTime)', if x and responseTime are fields of your log.
    You can also specify a simple field name, such as 'responseTime', to return the mean value of
    that field. If you omit the function argument, the rate of matching events per second will be
    returned. Specifying 'rate' yields the same result. Finally, you can specify "count", to compute
    the number of matching events in each time period (as defined by the "buckets" option).
--start=xxx
    Specify the beginning of the time range to query. Uses the same syntax as the "Start" field in
    the log view. You must specify this argument.
--end=xxx
    Specify the end of the time range to query. Uses the same syntax as the "End" field in the log
    view. Defaults to the current time.
--buckets=nnn
    The number of numeric values to return. The time range is divided into this many equal slices.
    For instance, suppose you query a four-hour period, with buckets = 4. The query will return four
    numbers, each covering a one-hour period. You may specify a value from 1 to 5000; 1 is the default.
--output=csv|json|json-pretty
    How to display the results. 'csv' prints all values on a single line, separated by commas.
    'json' prints the raw JSON response from the server, as documented at
    https://www.scalyr.com/help/api#numericQuery. 'json-pretty' also prints the JSON response,
    but prettyprinted.
--priority=high|low
    Specifies the execution priority for this query; defaults to "high". Use "low" for scripted
    operations where a delay of a second or so is acceptable. Rate limits are tighter for high-
    priority queries.
--token=xxx
    Specify the API token. For this command, should be a "Read Logs" token.
--version
    Prints the current version number of this tool.
--verbose
    Writes detailed progress information to stderr.
--proxy=<ip>:<port>
    An address to connect through when using a proxy. If not set will also take the value from one of the following
    environment variables if any are set: http_proxy, HTTP_PROXY, https_proxy, HTTPS_PROXY

Fetching facet counts

The "facet-query' command allows you to retrieve the most common values for a field. For instance, you can find the most common URLs accessed on your site, the most common user-agent strings, or the most common response codes returned. (If a very large number of events match your search criteria, the results will be based on a random subsample of at least 500,000 matching events.)

The default output format is CSV, sorted by count desc:

count,value
4,value-the-first
2,"other value"

Note that CSV output uses CRLF as the line separator.

Here are some usage examples:

curl 'https://www.scalyr.com/api/facetQuery?queryType=facet&field=uriPath&startTime=1h&token=XXX'

# Display the most common HTTP request URLs in the last 24 hours.
scalyr facet-query '$dataset="accesslog"' uriPath --start 24h

# Display the most common HTTP response codes for requests to index.html.
scalyr facet-query 'uriPath="/index.html"' status --start 24h

Complete argument list:

scalyr facet-query filter field --start xxx [options...]
    The filter specifies which log records to process. It uses the same syntax as the "Expression"
    field in the [log view](https://www.scalyr.com/events?mode=log).

--count=nnn
    How many distinct values to return. You may specify a value from 1 to 1000; 100 is the default.
--start=xxx
    Specify the beginning of the time range to query. Uses the same syntax as the "Start" field in
    the log view. You must specify this argument.
--end=xxx
    Specify the end of the time range to query. Uses the same syntax as the "End" field in the log
    view. Defaults to the current time.
--output=csv|json|json-pretty
    How to display the results. 'csv' prints one value (and its count) per line, separated by commas.
    'json' prints the raw JSON response from the server, as documented at
    https://www.scalyr.com/help/api#numericQuery. 'json-pretty' also prints the JSON response,
    but prettyprinted.
--priority=high|low
    Specifies the execution priority for this query; defaults to "high". Use "low" for scripted
    operations where a delay of a second or so is acceptable. Rate limits are tighter for high-
    priority queries.
--token=xxx
    Specify the API token. For this command, should be a "Read Logs" token.
--version
    Prints the current version number of this tool.
--verbose
    Writes detailed progress information to stderr.
--proxy=<ip>:<port>
    An address to connect through when using a proxy. If not set will also take the value from one of the following
    environment variables if any are set: http_proxy, HTTP_PROXY, https_proxy, HTTPS_PROXY

Usage limits

Your command line and API queries are limited to 30,000 milliseconds of server processing time, replenished at 36,000 milliseconds per hour. If you exceed this limit, your queries will be intermittently refused. (Your other uses of Scalyr, such as log uploading or queries via the web site, will not be impacted.) If you need a higher limit, drop us a line at [email protected].

Fetching numeric data using a timeseries

A timeseries precomputes a numeric query, allowing you to execute queries almost instantaneously, and without consuming your account's query budget. This is especially useful if you are using the Scalyr API to feed a home-built dashboard, alerting system, or other automated tool. Note that the Scalyr API allows multiple timeseries queries in a single API invocation, but the command-line tool only supports one query at a time.

When a new timeseries is defined, we immediately start live updating of that timeseries from the ingestion pipeline. In addition, we begin a background process to extend the timeseries backward in time, so that it covers the full timespan of your query. This backfill process is automatic, and if you later issue the same query with an even earlier start time, we will extend the backfill to cover that as well. To change this behavior, use --no-create-summaries.

A related argument, --only-use-summaries, controls whether this API call should only use preexisting timeseries or should execute the queries against the event database if no matching summary exists. If this argument is used, then your API call is guaranteed to return quickly and to execute inexpensively, but with possibly empty results. If this argument is not used, the call may be slower & more expensive, but will be complete. For example, issuing a new query over the past 3 weeks with --only-use-summaries will return quickly no matter what, but will initially return empty results until backfill (covering the past 3 weeks) is complete. This can be a cost-effective way to seed a new timeseries with a long backfill period when you don't need results right away.

Issuing a timeseries command with --no-create-summaries and without --only-use-summaries is equivalent to a [numeric-query](#Fetching numeric data) command.

Usage is identical to the numeric-query command:

scalyr timeseries-query '$dataset="accesslog"' --function 'bytes' --start 24h --buckets 24

Complete argument list:

scalyr timeseries-query [filter] [--function xxx] --start xxx [options...]
    Just like numeric-query if `--no-create-summaries` is specified. Otherwise Scalyr will create a timeseries for
    you in the background.
--start=xxx
    Specify the beginning of the time range to query. Uses the same syntax as the "Start" field in
    the log view. You must specify this argument.
--end=xxx
    Specify the end of the time range to query. Uses the same syntax as the "End" field in the log
    view. Defaults to the current time.
--function=xxx
    The value to compute from the matching events. You can use any function listed in
    https://www.scalyr.com/help/query-language#graphFunctions, except for fraction(expr). For
    example: 'mean(x)' or 'median(responseTime)', if x and responseTime are fields of your log.
    You can also specify a simple field name, such as 'responseTime', to return the mean value of
    that field. If you omit the function argument, the rate of matching events per second will be
    returned. Specifying 'rate' yields the same result. Finally, you can specify "count", to compute
    the number of matching events in each time period (as defined by the "buckets" option).
--buckets=nnn
    The number of numeric values to return. The time range is divided into this many equal slices.
    For instance, suppose you query a four-hour period, with buckets = 4. The query will return four
    numbers, each covering a one-hour period. You may specify a value from 1 to 5000; 1 is the default.
--output=csv|json|json-pretty
    How to display the results. 'csv' prints all values on a single line, separated by commas.
    'json' prints the raw JSON response from the server, as documented at
    https://www.scalyr.com/help/api#numericQuery. 'json-pretty' also prints the JSON response,
    but prettyprinted.
--priority=high|low
    Specifies the execution priority for this query; defaults to "high". Use "low" for scripted
    operations where a delay of a second or so is acceptable. Rate limits are tighter for high-
    priority queries.
--only-use-summaries
    Specifies to only query summaries, and not to search the column store for any summaries not yet populated.
    No results will be returned unless the summaries queried have been backfilled.
--no-create-summaries
    Specifies to not create summaries for this query.
--token=xxx
    Specify the API token. For this command, should be a "Read Logs" token.
--version
    Prints the current version number of this tool.
--verbose
    Writes detailed progress information to stderr.
--proxy=<ip>:<port>
    An address to connect through when using a proxy. If not set will also take the value from one of the following
    environment variables if any are set: http_proxy, HTTP_PROXY, https_proxy, HTTPS_PROXY

Retrieving configuration files

The "get-file" command allows you to retrieve a configuration file, writing the file text to stdout. Configuration files are used to define log parsers, dashboards, alerting rules, and more. Any page on the Scalyr web site which contains a full-page text editor, is editing a configuration file.

Using the get-file command is simple:

# Display the alerts file
scalyr get-file /alerts

# Display the "Foo" dashboard
scalyr get-file /dashboards/Foo

Complete argument list:

scalyr get-file file-path [options...]

--version
    Prints the current version number of this tool.
--token=xxx
    Specify the API token. For this command, should be a "Read Config" token.
--verbose
    Writes detailed progress information to stderr.
--proxy=<ip>:<port>
    An address to connect through when using a proxy. If not set will also take the value from one of the following
    environment variables if any are set: http_proxy, HTTP_PROXY, https_proxy, HTTPS_PROXY

Creating or updating configuration files

The "put-file" command allows you to create or overwrite a configuration file, taking the new file content from stdin.

Using the put-file command is simple:

# Overwrite the alerts file
scalyr put-file /alerts < alerts.json

# Create or overwrite the "Foo" dashboard
scalyr put-file /dashboards/Foo < fooDashboard.json

Complete argument list:

scalyr put-file file-path [options...]

--version
    Prints the current version number of this tool.
--token=xxx
    Specify the API token. For this command, should be a "Write Config" token.
--verbose
    Writes detailed progress information to stderr.
--proxy=<ip>:<port>
    An address to connect through when using a proxy. If not set will also take the value from one of the following
    environment variables if any are set: http_proxy, HTTP_PROXY, https_proxy, HTTPS_PROXY
--validate
    Validate if input is a valid HOCON. Validation relies on pyhocon parser
    (see https://github.com/chimpler/pyhocon).

Deleting configuration files

The "delete-file" command allows you to delete a configuration file:

Using the delete-file command is simple:

# Delete the "Foo" dashboard
scalyr delete-file /dashboards/Foo

Listing configuration files

The "list-files" command lists all configuration files:

scalyr list-files

Complete argument list:

scalyr list-files [options...]

--version
    Prints the current version number of this tool.
--token=xxx
    Specify the API token. For this command, should be a "Read Config" token.
--verbose
    Writes detailed progress information to stderr.
--proxy=<ip>:<port>
    An address to connect through when using a proxy. If not set will also take the value from one of the following
    environment variables if any are set: http_proxy, HTTP_PROXY, https_proxy, HTTPS_PROXY

TODO

Add option to use LF, rather than CRLF, when outputting CSV (for facet-query in particular).

Revision History

Feb. 21, 2014: version 0.1

Initial release.

About

Command-line tool for accessing Scalyr services

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published