Skip to content

runj is an experimental, proof-of-concept OCI-compatible runtime for FreeBSD jails.

License

Notifications You must be signed in to change notification settings

samuelkarp/runj

Repository files navigation

runj

runj is an experimental, proof-of-concept OCI-compatible runtime for FreeBSD jails.

Important: runj is a proof-of-concept and the implementation has not been evaluated for its security. Do not use runj on a production system. Do not run workloads inside runj that rely on a secure configuration. This is a personal project, not backed by the author's employer.

Status

Build Status

runj is in early development and is functional, but has very limited features.

runj currently supports the following parts of the OCI runtime spec:

  • Commands
    • Create
    • Delete
    • Start
    • State
    • Kill
  • Config
    • Root path
    • Process args
    • Process environment
    • Process terminal
    • Hostname
    • Mounts
    • Hooks
      • CreateRuntime
      • Poststop

runj also supports the following experimental FreeBSD-specific extensions to the OCI runtime spec:

  • Config
    • IPv4 mode
    • IPv4 addresses

Getting started

OCI bundle

To run a jail with runj, you must prepare an OCI bundle. Bundles consist of a root filesystem and a JSON-formatted configuration file called config.json.

Experimental FreeBSD-specific extensions may be added directly to the config.json if desired, or may optionally be added to a runj-specific file located in the bundle directory called runj.ext.json.

Root filesystem

The root filesystem can consist either of a regular FreeBSD userland or a reduced set of FreeBSD-compatible programs. For experimentation, statically-linked programs from /recovery may be copied into your bundle. You can obtain a regular FreeBSD userland suitable for use with runj from http://ftp.freebsd.org/pub/FreeBSD/releases/$ARCH/$VERSION/base.txz (where $ARCH and $VERSION are replaced by your architecture and desired version respectively). Several demo convenience commands have been provided in runj to assist in experimentation; you can use runj demo download to retrieve a working root filesystem from the FreeBSD website.

Config

runj supports a limited number of configuration parameters for jails. The OCI runtime spec does not currently include support for FreeBSD, however runj adds experimental support for some FreeBSD capabilities. In the spirit of "rough consensus and working code", runj serves as a testbed for future proposals to extend the specification. For now, the extensions are documented here.

You can use runj demo spec to generate an example config file for your bundle.

Once you have a config file, edit the root path and process args to your desired values.

Lifecycle

Create a container with runj create $ID $BUNDLE where $ID is the identifier you picked for your container and $BUNDLE is the bundle directory with a valid config.json.

Start your container with runj start $ID. The process defined in the config.json will be started.

Inspect the state of your container with runj state $ID.

Send a signal to your container process (or all processes in the container) with runj kill $ID.

Remove your container with runj delete $ID.

containerd

Along with the main runj OCI runtime, this repository also contains an experimental shim that can be used with containerd. The shim is available as containerd-shim-runj-v1 and can be used from the ctr command-line tool by specifying --runtime wtf.sbk.runj.v1.

containerd 1.5 or later is required as earlier versions do not have all the necessary patches for FreeBSD support. Additional functionality may be available in a development build of containerd. If you prefer to build from source, you can find the latest commits in the main branch of containerd.

OCI Image

A base OCI image for FreeBSD 12.1-RELEASE on the amd64 architecture is available in the Amazon ECR public gallery. You can pull the image with the ctr tool like this:

$ sudo ctr image pull public.ecr.aws/samuelkarp/freebsd:12.1-RELEASE

If you prefer to build your own image, need an image for a different architecture, or want to try out a different version of FreeBSD, runj contains a utility that can convert a FreeBSD root filesystem into an OCI image. You can download, convert, and import an image as follows:

$ runj demo download --output rootfs.txz
Found arch:  amd64
Found version:  12.1-RELEASE
Downloading image for amd64 12.1-RELEASE into rootfs.txz
[...output elided...]
$ runj demo oci-image --input rootfs.txz
Creating OCI image in file image.tar
extracting...
compressing...
computing layer digest...
writing blob sha256:f585dd296aa9697b5acaf9db7b40701a6377a3ccf4d29065cbfd3d2b80395733
writing blob sha256:413cc9413157f822242a4bb2c86ea50d20b8343964b5cf1d86182e132b51f78b
tar...
$ sudo ctr image import --index-name freebsd image.tar
unpacking freebsd (sha256:5ac2e259d1e84a9b955f7630ef499c8b6896f8409b6ac9d9a21542cb883387c0)...done

Running containers with ctr

With containerd, runj, and the containerd-shim-runj-v1 binary installed, you can use the ctr command-line tool to run containers like this:

$ sudo ctr run \
    --runtime wtf.sbk.runj.v1 \
    --rm \
    public.ecr.aws/samuelkarp/freebsd:13.1-RELEASE \
    my-container \
    sh -c 'echo "Hello from the container!"'
Hello from the container!

ctr can also be used to test the experimental FreeBSD-specific extensions by creating a runj.ext.json file as documented in oci.md and passing the path with --runtime-config-path. For example, to run a container interactively with access to the host's IPv4 networking stack (similar to the --net-host networking mode on Linux):

$ cat <<EOF >runj.ext.json
{"network":{"ipv4":{"mode":"inherit"}}}
EOF
$ sudo ctr run \
    --runtime wtf.sbk.runj.v1 \
    --rm \
    --tty \
    --runtime-config-path $(pwd)/runj.ext.json \
    public.ecr.aws/samuelkarp/freebsd:13.1-RELEASE \
    my-container \
    sh

Note that containerd and runj will not automatically create an /etc/resolv.conf file inside your container. If your container image does not include one, you may need to add one yourself for name resolution to function properly. A very simple /etc/resolv.conf file using Google's public DNS resolver is as follows:

nameserver 8.8.8.8

Implementation details

runj uses both FreeBSD's userland utilities for managing jails and jail-related syscalls. You must have working versions of jail(8), jls(8), jexec(8), and ps(1) installed on your system. runj kill makes use of the kill(1) command inside the jail's rootfs; if this command does not exist (or is not functional), runj kill will not work.

Building

runj builds largely with standard go build invocations, except for the integ-inside integration test helper which must be statically linked. A Makefile is available for use which correctly sets the expected build options.

The following targets are available:

  • all (or just make without additional arguments) - Build all binaries and generate a NOTICE file.
  • NOTICE - Generate the NOTICE file based on included Go dependencies.
  • install - Install the runj binaries to the standard filesystem locations.
  • lint - Run golangci-lint which includes a number of linters.
  • test - Run all unit tests.
  • integ-test - Run integration tests. Note that this target must be run as root as it creates jails, creates and configures network interfaces, and manipulates pf rules. It also expects working Internet access to reach 8.8.8.8 for verification of a working network.
  • clean - Remove built artifacts.

runj normally expects to be built from a git checkout so that appropriate revision and module information is built in. If building runj from an extracted tar instead, you may populate the REV_OVERRIDE file with an appropriate value as a substitute for the normal revision provided from git.

Contributing

Please see the contribution policy.

Future

Resource limits on FreeBSD can be configured using the kernel's RCTL interface. runj does not currently use this, but may add support for it via rctl(8) in the future.

License

runj itself is licensed under the same license as the FreeBSD project. Some dependencies are licensed under other terms. The OCI runtime specification and reference code is licensed under the Apache License, 2.0; copies of that reference code incorporated and modified in this repository remain under the original license.

About

runj is an experimental, proof-of-concept OCI-compatible runtime for FreeBSD jails.

Topics

Resources

License

Security policy

Stars

Watchers

Forks

Packages

No packages published

Languages