Ige Mac Bundler
===============

The script ige-mac-bundler is a helper script that creates application
bundles form GTK+ executables for Mac OS X. The resulting bundle will
contain a complete self-hosting GTK+ installation, ready to run on any
computer with Mac OS X 10.4 or later installed.

GTK+ and its companion libraries are automatically put into the
bundle, but the application packager must tell the script what other
files and directories to copy.

NOTE: This tool is written to work with a jhbuild built GTK+ , not
Macports. If you build with Macports, make sure that the Pango atsui
module is builtin to the Pango library, by using the configure flag
--with-included-modules=basic-atsui.


Setting up
----------

Run "make install"; this installs the script into ~/bin. Make sure you
have that directory in your path, or use the full path when starting
the script.


Prerequisites
-------------

You need to have a GTK+ installation as done for example by using
jhbuild as described on the GTK+ OS X project site:

 http://developer.imendio.com/projects/gtk-macosx/build-instructions

The ige-mac-bundler command needs to be ran inside an environment
setup for running the GTK+, for example inside a jhbuild shell.

For the more in-depth parts described here, you are expected to be
familiar with the layout of OS X bundles.


Quick introduction
------------------

You need to create a configuration file describing the application
bundle. The very simple example, example.bundle:

<?xml version="1.0"?> <!--*- mode: xml -*-->
<app-bundle>
  <meta>
    <prefix>/opt/gtk</prefix>
  </meta>

  <plist>${project}/Info.plist</plist>

  <!-- Optionally specify a launcher script to use. Builtin script is
       used if not specified.  -->
  <!--launcher-script>${project}/launcher.sh</launcher-script-->

  <!-- The executable for the application -->
  <main-binary>${prefix}/bin/my-app</main-binary>

  <!-- Modules for GTK+ (image loaders, etc) -->
  <binary>${prefix}/lib/gtk-2.0</binary>

  <!-- Any additional data, like images, or Glade files -->
  <data>
    ${prefix}/share/my-app
  </data>

</app-bundle>

Put this file into a directory, together with the standard Info.plist
file that all Mac OS X bundles need. Then run the script with the
bundle configuration path as argument. This will create a bundle in
the current directory.


The file format in more depth
=============================

The simple example above works for small and simple applications, but
often you will need to specify more data to copy in, or to have more
detailed control over what is copied. 

Here we go through in more depth how this can be acheived. Every file
and directory to copy is specified with a source path, and an optional
destination path. An example that copies an entire directory
recursively, from the installation prefix:

  <data>
    ${prefix}/share/my-data
  </data>

Since no destination path is specified, the directory will be copied
into the standard location. Note that the special value ${prefix} is
used in the source path, which makes the default destination path be
relative to the "bundle prefix", which is the Contents/Resources
directory inside the bundle. Applications that use the freedesktop
"data dir" specification to find their data will automatically find
its data this way (applications can also use the Carbon or Cocoa
bundle APIs to find data).

Another useful "special value" that can be used in source paths is
${project}, which refers to the directory where the XML file is
located. An example:

  <data dest="${bundle}/Contents/Resources/etc/gtk-2.0/gtkrc">
    ${project}/gtkrc
  </data>

Here you notice that a destination path is supplied. This must be done
since there is no way to figure out where to put the file that doesn't
come from a ${prefix} location. You can also see another variable
used, this time in the destination path, ${bundle}. All destination
paths must be either unset or start with ${bundle}.

The remaining variables, are:

 ${env:name} - evaluates to the environment variable "name"

 ${pkg:module:name} - evaluates to the value of the pkg-config
                      variable "name" in the module "module"

An example use case of the latter is for finding files that are
located in a versioned directory without having to maintain the
directory name manually. For example:

  <binary>
    ${prefix}/lib/gtk-2.0/${pkg:gtk+-2.0:gtk_binary_version}/loaders
  </binary>


Metadata
--------

Now that we know how paths can be specified, let's back up and see the
beginning of a more extensive exampe. The first thing to setup is some
metadata:

<app-bundle>

  <meta>
    <prefix name="default">${env:PREFIX}</prefix>
    <destination overwrite="yes">${env:HOME}/Desktop</destination>
  </meta>

  [...]

</app-bundle>

We use the ${env} variable to get the installation prefix (which comes
from the jhbuild build script). We also use it to set the destination
of the app bundle on the current user's desktop.

You can set additional prefixes and refer to them in paths:

  <meta>
    <prefix name="default">${env:PREFIX}</prefix>
    <prefix name="gst">/opt/gstreamer</prefix>
    <prefix name="stuff">/opt/stuff</prefix>
  </meta>

The additional prefixes are referred to by using ${prefix:name}, where
"name" is one of the names defined above.


Installed data
--------------

Next you need to list the data to install. Some is required for the
app bundle to be complete:

  <plist>${project}/../data/Info.plist</plist>

  <launcher-script>${project}/launcher.sh</launcher-script>

  <main-binary>${prefix}/bin/giggle</main-binary>

The file Info.plist is the standard Mac OS file for bundles. See XXX
for documentation on those.

The launcher script is used to setup the necessary environment for the
application to work. If your application does this itself, you can
leave it out. Many applications will work out of the box with the
launcher script though. If no script is specified in the tag, a
default one is used, that sets up the needed environent for most GTK+
applications.

Unsurprisingly, the main-binary tag specifies the executable to launch
when starting the application.


General application data
------------------------

Next we handle any general data to copy into the bundle. A
straight-forward example:

  <data dest="${bundle}/Contents/Resources">
    ${project}/Giggle.icns
  </data>

  <data dest="${bundle}/Contents/Resources/etc/gtk-2.0/gtkrc">
    ${project}/gtkrc
  </data>


Binaries
--------

When it comes to binaries (executables and loadable modules), the tag
"binary" should be used. The difference between "binary" and "data" is
that all copied binaries are scanned for library dependencies, which
are automatically copied into the bundle. This way, you only need to
list your executables and plugins. Again, an example:

  <binary>
    ${prefix}/lib/pango/${pkg:pango:pango_module_version}/modules/pango-basic-atsui.so
  </binary>

This will copy the ATSUI font module for Pango. This in turn will pull
in any needed libraries that it links to.

Note that you can use wildcards for all data and binary tags, but only
in the last path component, for example:

  <binary>
    ${prefix}/lib/gtk/2.10.0/loaders/*.so
  </binary>


Icon themes
-----------

GTK+ icon themes have their own tag, "icon-theme". The name of the
theme (which currently must reside in the default prefix) specifies
which theme to copy, and the "icons" property specifies which icons to
copy. The valid values are:

  auto - tries to copy all icons names that match strings in all
         copied binaries; this will not always work perfectly but is
         good for getting started, and for simple applications
 
  all - copies all icons

  none - copies no icons, this can be used in combination with
         specifying icons manually with a regular data tag; the icon
         theme itself must be listed in order to get the index theme
         copied and an icon cache generated

Note that the base theme "hicolor" is always copied, since it is
required by GTK+. An example:

  <icon-theme icons="auto">
    Tango
  </icon-theme>


Unimplemented so far
--------------------

- Translations - you can copy them manually using the data tag

- Built-in support for PyGTK or Mono applications

- Using install_name_tool instead of relying on DYLD_*

- Support for copying in frameworks.


Debugging the bundle
====================

In order to debug the created app bundle (most notably the launcher
script), you can set the environment variable IGE_DEBUG_LAUNCHER before
starting the applications directly from a terminal. e.g.:

  IGE_DEBUG_LAUNCHER=yes MyApp.app/Contents/MacOS/MyApp

This will print out the steps performed by the launcher script before
the application executable is started.

Note also that the Console.app program that comes with OS X is very
useful when debugging app bundle problems. You can use it to see any
output from the application the console log window.

To run the application under gdb, do:

  IGE_DEBUG_GDB=yes MyApp.app/Contents/MacOS/MyApp


License
=======

The script is Copyright (C) 2007, 2008 Imendio AB, and licensed under
the GNU General Public License version 2. Note that the resulting bundle created
by the script is not covered by that, each invidiual library has its
own license.