Skip to content

Randoragon's personal, general-purpose neatroff macro package

License

Notifications You must be signed in to change notification settings

randoragon/tmac-rnd

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

62 Commits
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

troff rnd macros

NOTE This is an abandoned project. I ditched the troff/neatroff world, because there were just too many inconveniencing factors along the way, despite the many positives.

Table of Contents

  1. Description
  2. Features
  3. Dependencies
  4. Installation

Description

rnd is a general-purpose macro package for troff that is based on the old ms macros originally used by Bell Labs, with numerous extensions, additions and modifications.

The package aims to provide a flexible interface with many settings that globally affect the document (inspired by the mm macros), but unlike mm it enables the user to override most defaults on an individual basis.

The rnd macros serve as my primary tool for writing documents in troff, and as such I reserve the right to change them in any way I want to fit into my personal workflow. At no point should this macro package be considered "complete", for the same reasons.

The macro package is written with Ali Gholami Rudi's Neatroff implementation of roff in mind and it relies on many extended contructs that Neatroff introduces. To learn more about Neatroff you can start here.

Features

Differences with vanilla ms

  1. Removed the following macros:
    • TM, IM, MF, MR, LT, RP, TR
    • UX, US
    • MH, PY, AW
    • S1, S2, S3, SY, CS
  2. Removed the following registers:
    • IM, MN, CS, ST
  3. Modified the following macros:
    • TL, AU, AI, BX (visual tweaks)
    • SH, NH
    • FP
  4. Added the following macros:
    • headings: SHs, NHs, Hs, SHo, NHo, Ho, NHf, HE, H{
    • lists: BL, AL, LI, LE
    • media: PDF, URL
    • toc: toc.init, toc.chapter, toc.section, TOC, CP
    • fonts: FC
    • profile: note, report, book, fmt
  5. Reserved the following number registers:
    • headings: SH, SH1..SH5, NH1..NH5, HE, _s, _a, _f
    • lists: LV, Lv, LT1..LT9, LD0..LD9, LO1..LO9, LS1..LS9, Ls1..Ls9, LC1..LC9, Li
    • toc: TM
    • profile: DT
    • misc: _d, _o, _maxw, _w, _h, _i, _u, NT
  6. Reserved the following string names:
    • headings: SH1..SH5, NH1..NH5, _a
    • media: def_col_url, col_url, _col
    • toc: _s, HP
  7. Reserved the following environment names:
    • _toc
  8. Changed font names recognized by the FP macro
    • for a full list of names refer to tmac.main, the list might change with time

New Headings

The new heading syntax comes in 2 forms which look as follows:

.SH [options] <level> text...
.NH [options] <level> text...

or

.SH [options] <level>
text...
.HE <toc name>
.NH [options] <level>
text...
.HE <toc name>

The second form exists in case you want to have a URL in your heading, or any other advanced formatting that can't be done in-line. There is one caveat: the second form does not support the u option (options are explained below).

toc name is the name displayed in a table of contents. Only headings of the second form require it to be specified separately in the HE macro, because for headings of the first form, the text is taken directly from the NH or SH macro.

Options

options is a single word composed of lowercase letters of the following form:

[l|c|r][b][i][u]
  • l, c, r denote adjustment to the left, center or right
  • b denotes emboldening
  • i denotes italics
  • u denotes underline

Options can be skipped, in which case the default settings will be used. The default option strings for each level of section and numbered headings are stored in SH1..SH5 and NH1..NH5 strings. You can change these defaults easily with SHo, NHo and Ho macros:

.SHo cb b bi i i
.NHo cb b bi i i
.Ho  cb b bi i i

The above macros change level one headings to be centered and bold, level 2 headings to be bold, level 3 to be bold and italic, and level 4 and 5 headings to be italic. You can override these defaults in each individual heading invocation, though.

Point size

Headings have configurable point sizes per level. The point size of each level is stored in SH1..SH5 for section headings and in NH1..NH5 for numbered headings. You can easily set these registers to desired values using the new SHs, NHs and Hs macros:

.SHs 16 15 14 13 12
.NHs 16 15 14 13 12
.Hs  16 15 14 13 12

Hs sets the same point sizes for both SH and NH, it's just a shorthand for calling SHs and NHs with the same arguments. You can omit up to 4 arguments to initialize the remaining values to the last one. The following 2 lines do the same thing:

.NHs 14 13 12 12 12
.NHs 14 13 12

This functionality is inspired by the mm macros.

For numbered headings, you can also set number formats for each level separately with the NHf macro, e.g.:

.NHf A a i 1 1

Empty or missing arguments will be silently ignored. By default, all formats are set to arabic (1).

Named references

For all headings, a Neatroff named reference is automatically created, for the purpose of generating tables of contents.

For numbered headings, the reference name matches the current chapter prefix (toc prefix) followed by the heading "prefix". For example, if you start a new chapter with prefix "1", a numbered heading "1. Example" will have the reference #h11., while a heading with prefix "A.3.ii. Nested Example" within a chapter prefixed "B" will have the reference #hBA.3.ii. (note the trailing periods!). If a heading appears outside of a chapter, the toc prefix part is an empty string (i.e. it should be skipped).

Section headings don't have prefixes, so they are enumerated normally, i.e. #h1, #h2 and so on (no trailing period!). The rules for chapter prefixes are the same as with numbered headings.

Lists

Lists are much inspired by the mm macros. You can start a new list with the following macros, for bulleted and enumerated lists respectively:

.BL [symbol] [indent] [offset] [spacing]
.AL [format] [indent] [offset] [spacing]
  • symbol is \(bu by default, but any non-empty string is valid
  • format is transparently passed to .af for different number formatting
  • indent is additional indentation, set to 4n by default
  • offset is indentation added to all prior indentation to separate the symbol/number from the item body. Set to 4n by default
  • spacing is vertical distance added inbetween all list items. By default it's equal to 0, which results in simple line breaks.

After initializing a list, each list item can be added with

.LI [symbol] [indent] [offset]

Followed by the body of the item. The arguments for LI are identical to those of BL (except spacing), and they serve as an optional override that affects only a particular item.

At the end, the list must be terminated with

.LE

Lists can be nested up to 9 levels.

Media Macros

PDF images can be embedded with

.PDF <adjust> <path> <width> <height> [scale]
  • adjust - l, c, r or a number denoting indentation
  • path - path to the image file
  • width - width of the image
  • height - height of the image
  • scale - scaling factor in 1/1000, 1000 is the maximum available width

The scaling mechanism works in the following way:
If scale is not supplied, the image will aim to be originally-sized, but capped at maximum on-page width (the maximum width is computed as \n(.l-\n(.i). If scale is supplied, 1000 denotes the maximum width.

Hyperlinks can be embedded with

.URL <destination> [text] [text2]

Where destination is the URI, text is displayed as a clickable, followed by non-clickable text2 (similar to how additional parameters are handled in .B and .I macros). If text is an empty string (or omitted), destination is used instead.
By default, all URLs have a custom color stored in the def_col_url string. If you want a different color, you should temporarily define the col_url string. def_col_url should be treated as a read-only resource.

Table of Contents

All headings can be automatically included into the ToC. You can control which headings get added by changing the value of the TM register which denotes the largest heading number to be included, and is equal to 2 by default (which means headings of level 1 and 2 will be included).

Other than headings, you can define new chapters with CP:

.CP <on-page name> <toc prefix> [toc name]

Each chapter will break to a new page, disable the top header of that page and replace it with a nice caption.

  • on-page name is the text that will be printed on the page
  • toc prefix is typically a short string that will appear in ToC to the left of the chapter name, typically it's the chapter number, or something like "A", "B", "C" for appendices
  • toc name is an optional alternate title for the ToC

Sometimes you might want to display full text "Chapter 1 - Title" on the page, but in the ToC you want a format like "1. Title". The toc name argument lets you override on-page name for those purposes. If you don't specify toc name, on-page name will be used by default.

Chapters automatically create named references of the form #c1, #c2, #c3 and so on. These references are used when generating the table of contents.

The ToC can be printed anywhere within the document, any number of times, without the need to wait for headings/chapters to accumulate. To print the ToC, you must supply the exact line:

.TOC

This convenient functionality is made possible by utilizing the stderr stream as intermediary output instead of relying on diversions. However, this comes at a cost:

  • An external script must be used to capture and parse stderr, then merge it into the original document and recompile.
  • Please take a look at the ntmake script within this repository to see how you can build the document with ToC.
  • If you don't plan on using .TOC, you can compile as normal, without any complications!

Fonts

The FP macro has been modified with new font names. It is up to the user to ensure that appropriate font description files have been provided to neatroff (inside the devutf directory).

There is a slight change in convention - FP changes the "main" fonts, while a new macro - FC changes constant width fonts. These two have been separated to make adding features like code blocks easier.

The default layout of font positions is as follows:

pos font
1 R
2 I
3 B
4 BI
5 CR
6 CI
7 CB
8 CX

The first 4 positions are controlled by FP, the last 4 by FC.

Document Profiles

In order to provide minimal support for different document types, there are a couple of macros that control the global configuration. All of these should be invoked as one of the first macros (if not first).

.note
.report
.book
  1. note is the default profile which aims to provide sane defaults for writing quick notes, akin to markdown.
  2. report is for writing technical reports.
  3. book is for writing simple books.

Brief profiles comparison

Feature note report book
page numbering
separate cover page
.TOC causes page break
.CP causes page break

The book and report produce slightly different output visually in some aspects. For example, a new chapter in a report starts from the top of the page, whereas in a book there is additional spacing from the top of the page and the chapter name point size is slightly bigger, etc.

Dependencies

rnd relies on the following packages provided by Neatroff:

  • mpost: URLs
  • msdisp: display macros
  • mskeep: keep blocks (needed by display macros)

These macros are not sourced by rnd, and you have to manually specify -mpost, -msdisp and -mskeep when compiling. Neatroff automatically ships with these though, so there shouldn't be a problem.

Installation

To keep maintenance and writing new extensions easy and sane, the package is split across multiple files, as seen in the src directory. However, multiple macro files are too inconvenient to carry around, so the Makefile within this repository can stitch all files scattered in src into a single, complete form.

To build the file containing all macros, run:

make

This will create a new tmac.rnd file in the base directory.

About

Randoragon's personal, general-purpose neatroff macro package

Topics

Resources

License

Stars

Watchers

Forks