- Introduction
- Project history
- Installation
- Rulesets
- How to use
- Running your code through WPCS automatically using CI tools
- Fixing errors or whitelisting them
- Contributing
- License
This project is a collection of PHP_CodeSniffer rules (sniffs) to validate code developed for WordPress. It ensures code quality and adherence to coding conventions, especially the official WordPress Coding Standards.
- In April 2009 original project from Urban Giraffe was published.
- In May 2011 the project was forked on GitHub by Chris Adams.
- In April 2012 XWP started to dedicate resources to develop and lead the creation of the sniffs and rulesets for
WordPress-Core
,WordPress-VIP
(WordPress.com VIP), andWordPress-Extra
. - In 2015, J.D. Grimes began significant contributions, along with maintenance from Gary Jones.
- In 2016, Juliette Reinders Folmer began contributing heavily, adding more commits in a year than anyone else in 5 years previous since the project's inception.
The WordPress Coding Standards require PHP 5.3 or higher and PHP_CodeSniffer version 2.9.0 or higher. As of version 0.13.0, the WordPress Coding Standards are compatible with PHPCS 3.0.2+. In that case, the minimum PHP requirement is PHP 5.4.
Standards can be installed with the Composer dependency manager:
composer create-project wp-coding-standards/wpcs --no-dev
Running this command will:
- Install WordPress standards into
wpcs
directory. - Install PHP_CodeSniffer.
- Register WordPress standards in PHP_CodeSniffer configuration.
- Make
phpcs
command available fromwpcs/vendor/bin
.
For the convenience of using phpcs
as a global command, you may want to add the path to the wpcs/vendor/scripts
(PHPCS 2.x) and/or wpcs/vendor/bin
(PHPCS 3.x) directories to a PATH
environment variable for your operating system.
When installing the WordPress Coding Standards as a dependency in a larger project, the above mentioned step 3 will not be executed automatically.
There are two actively maintained Composer plugins which can handle the registration of standards with PHP_CodeSniffer for you:
It is strongly suggested to require
one of these plugins in your project to handle the registration of external standards with PHPCS for you.
-
Install PHP_CodeSniffer by following its installation instructions (via Composer, Phar file, PEAR, or Git checkout).
Do ensure that PHP_CodeSniffer's version matches our requirements, if, for example, you're using VVV.
-
Clone the WordPress standards repository:
git clone -b master https://github.com/WordPress-Coding-Standards/WordPress-Coding-Standards.git wpcs
-
Add its path to the PHP_CodeSniffer configuration:
phpcs --config-set installed_paths /path/to/wpcs
Pro-tip: Alternatively, you can tell PHP_CodeSniffer the path to the WordPress standards by adding the following snippet to your custom ruleset:
<config name="installed_paths" value="/path/to/wpcs" />
To summarize:
cd ~/projects
git clone https://github.com/squizlabs/PHP_CodeSniffer.git phpcs
git clone -b master https://github.com/WordPress-Coding-Standards/WordPress-Coding-Standards.git wpcs
cd phpcs
#PHPCS 2.x
./scripts/phpcs --config-set installed_paths ../wpcs
#PHPCS 3.x
./bin/phpcs --config-set installed_paths ../wpcs
And then add the ~/projects/phpcs/scripts
(PHPCS 2.x) or ~/projects/phpcs/bin
(PHPCS 3.x) directory to your PATH
environment variable via your .bashrc
.
You should then see WordPress-Core
et al listed when you run phpcs -i
.
The project encompasses a super-set of the sniffs that the WordPress community may need. If you use the WordPress
standard you will get all the checks. Some of them might be unnecessary for your environment, for example, those specific to WordPress VIP coding requirements.
You can use the following as standard names when invoking phpcs
to select sniffs, fitting your needs:
WordPress
- complete set with all of the sniffs in the projectWordPress-Core
- main ruleset for WordPress core coding standardsWordPress-Docs
- additional ruleset for WordPress inline documentation standardsWordPress-Extra
- extended ruleset for recommended best practices, not sufficiently covered in the WordPress core coding standards- includes
WordPress-Core
- includes
WordPress-VIP
- extended ruleset for WordPress VIP coding requirements- includes
WordPress-Core
- includes
If you need to further customize the selection of sniffs for your project - you can create a custom ruleset file. When you name this file either phpcs.xml
or phpcs.xml.dist
, PHP_CodeSniffer will automatically locate it as long as it is placed in the directory from which you run the CodeSniffer or in a directory above it. If you follow these naming conventions you don't have to supply a --standard
arg. For more info, read about using a default configuration file. See also provided phpcs.xml.dist.sample
file and fully annotated example in the PHP_CodeSniffer documentation.
The WordPress Coding Standard contains a number of sniffs which are configurable. This means that you can turn parts of the sniff on or off, or change the behaviour by setting a property for the sniff in your custom phpcs.xml
file.
You can find a complete list of all the properties you can change in the wiki.
The PHPCompatibility ruleset comes highly recommended. The PHPCompatibility sniffs are designed to analyse your code for cross-PHP version compatibility. Install it as a separate ruleset and either run it separately against your code or add it to your custom ruleset.
Whichever way you run it, do make sure you set the testVersion
to run the sniffs against. The testVersion
determines for which PHP versions you will receive compatibility information. The recommended setting for this at this moment is 5.2-7.1
to support the same PHP versions as WordPress Core supports.
For more information about setting the testVersion
, see:
Run the phpcs
command line tool on a given file or directory, for example:
phpcs --standard=WordPress wp-load.php
Will result in following output:
--------------------------------------------------------------------------------
FOUND 10 ERRORS AND 5 WARNINGS AFFECTING 8 LINES
--------------------------------------------------------------------------------
24 | WARNING | [ ] error_reporting() can lead to full path disclosure.
24 | WARNING | [ ] error_reporting() found. Changing configuration at runtime
| | is rarely necessary.
34 | ERROR | [x] Expected 1 spaces before closing bracket; 0 found
39 | WARNING | [ ] Silencing errors is discouraged
39 | WARNING | [ ] Silencing errors is discouraged
46 | ERROR | [ ] Inline comments must end in full-stops, exclamation marks,
| | or question marks
46 | ERROR | [x] There must be no blank line following an inline comment
63 | WARNING | [ ] Detected access of super global var $_SERVER, probably
| | needs manual inspection.
63 | ERROR | [ ] Detected usage of a non-validated input variable: $_SERVER
63 | ERROR | [ ] Missing wp_unslash() before sanitization.
63 | ERROR | [ ] Detected usage of a non-sanitized input variable: $_SERVER
74 | ERROR | [ ] Inline comments must end in full-stops, exclamation marks,
| | or question marks
90 | ERROR | [x] String "Create a Configuration File" does not require
| | double quotes; use single quotes instead
92 | ERROR | [ ] Expected next thing to be an escaping function (see Codex
| | for 'Data Validation'), not '$die'
92 | ERROR | [ ] Expected next thing to be an escaping function (see Codex
| | for 'Data Validation'), not '__'
--------------------------------------------------------------------------------
PHPCBF CAN FIX THE 3 MARKED SNIFF VIOLATIONS AUTOMATICALLY
--------------------------------------------------------------------------------
Please see "PHP Code Sniffer with WordPress Coding Standards Integration" in the PhpStorm documentation.
Install the sublime-phpcs package, then use the "Switch coding standard" command in the Command Palette to switch between coding standards.
sublime-phpcs is insanely powerful, but if you'd prefer automatic linting, SublimeLinter-phpcs can do that.
- Install PHP Sniffer and WordPress Coding Standards per above.
- Use Package Control to search for and install SublimeLinter then SublimeLinter-phpcs.
- From the command palette, select
Preferences: SublimeLinter Settings - User
and changeuser.linters.phpcs.standard
to the phpcs standard of your choice (e.g.WordPress
,WordPress-VIP
, etc.).
- You may need to restart Sublime for these settings to take effect. Error messages appear in the bottom of the editor.
- Install PHP Sniffer and WordPress Coding Standards per above.
- Install linter-phpcs via Atom's package manager.
- Run
which phpcs
to get yourphpcs
executable path. - Open the linter-phpcs package settings; enter your
phpcs
executable path and one of the coding standards specified above (e.g.WordPress
,WordPress-VIP
, etc.). - Below these settings find the Tab Width setting and change it to
4
.
- Note that certain items within PHPCS config file can cause linting to fail, see linter-phpcs #95 for more details.
Please see "Setting up PHP CodeSniffer in Visual Studio Code", a tutorial by Tom McFarlin.
To integrate PHPCS with WPCS with Travis CI, you'll need to install both before_install
and add the run command to the script
.
If your project uses Composer, the typical instructions might be different.
If you use a matrix setup in Travis to test your code against different PHP and/or WordPress versions, you don't need to run PHPCS on each variant of the matrix as the results will be same. You can set an environment variable in the Travis matrix to only run the sniffs against one setup in the matrix.
language: php
matrix:
include:
# Arbitrary PHP version to run the sniffs against.
- php: '7.0'
env: SNIFF=1
before_install:
- if [[ "$SNIFF" == "1" ]]; then export PHPCS_DIR=/tmp/phpcs; fi
- if [[ "$SNIFF" == "1" ]]; then export SNIFFS_DIR=/tmp/sniffs; fi
# Install PHP_CodeSniffer.
- if [[ "$SNIFF" == "1" ]]; then git clone -b master --depth 1 https://github.com/squizlabs/PHP_CodeSniffer.git $PHPCS_DIR; fi
# Install WordPress Coding Standards.
- if [[ "$SNIFF" == "1" ]]; then git clone -b master --depth 1 https://github.com/WordPress-Coding-Standards/WordPress-Coding-Standards.git $SNIFFS_DIR; fi
# Set install path for WordPress Coding Standards.
- if [[ "$SNIFF" == "1" ]]; then $PHPCS_DIR/bin/phpcs --config-set installed_paths $SNIFFS_DIR; fi
# After CodeSniffer install you should refresh your path.
- if [[ "$SNIFF" == "1" ]]; then phpenv rehash; fi
script:
# Run against WordPress Coding Standards.
# If you use a custom ruleset, change `--standard=WordPress` to point to your ruleset file,
# for example: `--standard=wpcs.xml`.
# You can use any of the normal PHPCS command line arguments in the command:
# https://github.com/squizlabs/PHP_CodeSniffer/wiki/Usage
- if [[ "$SNIFF" == "1" ]]; then $PHPCS_DIR/bin/phpcs -p . --standard=WordPress; fi
You can find information on how to deal with some of the more frequent issues in the wiki.
See CONTRIBUTING, including information about unit testing the standard.
See LICENSE (MIT).