Skip to content

Latest commit

 

History

History
54 lines (39 loc) · 2.51 KB

README.md

File metadata and controls

54 lines (39 loc) · 2.51 KB

Z-Calibration Logo

Automatic Z-Calibration

It's like automatically baby-stepping on your 3D printer before every print, and the first layer will always be perfect - no matter which nozzle or new flex-plate is being tested.

Documentation

Visit the Wiki to view the full documentation for this Klipper plugin.

The latest release notes are here.

📌 And remember: The smaller the switch-offset, the further the nozzle is away from the bed! 😉

Further Resources

A great how-to video by Kapman: https://youtu.be/oQYHFecsTto

And if you are looking for an RRF version of this automatic z-offset calibration

You can find one here from pRINTERnOODLE - This is really fantastic to see 🎉

Thanks for all your feedback and support!

And if you like my work and want to support me, you can do so here:

ko-fi

Disclaimer

You use it at your onw risk! I'm not responsible for any damage that might result. Although, this extension works rock solid for me and many others for years now. Always be careful and double check everything when configuring or working with your printer. And as always, never leave unattended while printing!