Skip to content

A RuuviTag -> MQTT bridge supporting Home Assistant MQTT discovery

License

Notifications You must be signed in to change notification settings

ppetru/ruuvi2mqtt

 
 

Repository files navigation

ruuvi2mqtt

A RuuviTag -> MQTT bridge supporting Home Assistant MQTT discovery.

Based on the excellent EspruinoHub and very much a work in progress.

Setting up

Ideally use a Raspberry Pi 3 or Zero W, as these have Bluetooth LE on them already. However the BLE USB dongles mentioned in the Puck.js Quick Start guide should work.

Get Raspbian running on your Raspberry Pi

  • Download Raspbian Lite from https://www.raspberrypi.org/downloads/raspbian/
  • Copy it to an SD card with sudo dd if=2017-11-29-raspbian-stretch-lite.img of=/dev/sdc status=progress bs=1M on Linux (or see the instructions on the Raspbian download page above for your platform)
  • Unplug and re-plug the SD card and add a file called ssh to the boot drive - this will enable SSH access to the Pi
  • If you're using WiFi rather than Ethernet, see this post on setting up WiFi via the SD card
  • Now put the SD card in the Pi, apply power, and wait a minute
  • ssh [email protected] (or use PuTTY on Windows) and use the password raspberry
  • Run sudo raspi-config and set the Pi up as you want (eg. hostname, password)

Installation

# Install Node, Bluetooth, etc
sudo apt-get update
sudo apt-get install git-core nodejs nodejs-legacy npm build-essential mosquitto mosquitto-clients bluetooth bluez libbluetooth-dev libudev-dev
# Now get ruuvi2mqtt
git clone https://github.com/ppetru/ruuvi2mqtt
# Install ruuvi2mqtt's required Node libraries
cd ruuvi2mqtt
npm install
# Optional - enable gathering of historical data by creating a 'log' directory
mkdir log
# Give Node.js access to Bluetooth
sudo setcap cap_net_raw+eip $(eval readlink -f `which node`)

You can now type ./start.sh to run ruuvi2mqtt, but it's worth checking out the Auto Start section to see how to get it to run at boot.

Auto Start

There are a 2 main ways to run ruuvi2mqtt on the Raspberry Pi.

Headless Startup

This is the normal way of running services - to configure them as a system start-up job using systemd:**

    sudo cp systemd-ruuvi2mqtt.service /etc/systemd/system/ruuvi2mqtt.service

and edit it as necessary to match your installation directory and user configuration. Then, to start it for testing:

    sudo systemctl start ruuvi2mqtt.service && sudo journalctl -f -u ruuvi2mqtt

If it works, Ctrl-C to break out and enable it to start on login:

    sudo systemctl enable ruuvi2mqtt.service

Console Startup

If you have a video output on your Pi then you can run ruuvi2mqtt at boot - on the main display - so that you can see what it's reporting.

  • Edit .bashrc and add the following right at the bottom:
if [ $(tty) == /dev/tty1 ]; then
  while true; do
    ruuvi2mqtt/start.sh
    sleep 1s
  done
fi
  • Now run sudo raspi-config, choose Boot Options, Desktop / CLI, and Console Autologin

  • Next time you reboot, the console will automatically run ruuvi2mqtt

Usage

TBD

About

A RuuviTag -> MQTT bridge supporting Home Assistant MQTT discovery

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • JavaScript 99.4%
  • Shell 0.6%