Skip to content

onejli/docker-vpn-helper

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

11 Commits
 
 
 
 
 
 

Repository files navigation

docker-vpn-helper

How does Docker work on OSX?

docker-machine leverages VirtualBox to create a boot2docker VM (based on Tiny Core Linux) that exposes the required kernel facilities (e.g., cgroups and namespaces) needed by the Docker daemon. The Docker client for OSX relies on the Docker daemon running within the boot2docker VM to perform all of its actions.

How does this affect me?

A VirtualBox host-only network adapter is used to facilitate communication between the Docker client running on the physical host and the Docker daemon within the boot2docker VM. VirtualBox normally adds routes for this to the routing table. Unfortunately, the Cisco AnyConnect VPN agent manages the routing table with an iron fist and redirects all routes into its utun0 interface. This effectively cuts off communication to the Docker daemon running inside of the boot2docker VM.

Before connecting to the VPN
$ netstat -nr
Routing tables

Internet:
Destination        Gateway            Flags        Refs      Use   Netif Expire
<SNIP>
192.168.99         link#11            UC              1        0 vboxnet
192.168.99.100     8:0:27:0:ed:24     UHLWIi          3       11 vboxnet   1179
<SNIP>
After connecting to the VPN
$ netstat -nr
Routing tables

Internet:
Destination        Gateway            Flags        Refs      Use   Netif Expire
<SNIP>
192.168.99         link#9             UCS             0        0   utun0
<SNIP>

Some additional information can be found here.

Are you using a VPN? If so, try disconnecting and see if creation will succeed without the VPN. Some VPN software aggressively controls routes and you may need to manually add the route.

A partial solution

A better solution than manually re-adding routes is to help VirtualBox fix the routing table. The Cisco AnyConnect VPN agent removes/redirects routes upon connection, but doesn't restore them after disconnecting. This seems to make the VirtualBox network kernel modules very unhappy. After dropping off of VPN, VirtualBox is able to add host-only network adapters, but it is NOT able to add the routes needed to connect them. This thread describes one solution.

  1. Disconnect from the VPN (you can actually leave the Cisco AnyConnect application/services running)
  2. Stop all VirtualBox processes (i.e., all VMs and the GUI)
  3. Restart the VirtualBox kernel modules sudo /Library/Application\ Support/VirtualBox/LaunchDaemons/VirtualBoxStartup.sh restart

What can I do about this?

The boot2docker VM is also configured with a NAT interface and VirtualBox supports the ability to forward ports between the physical host and the guest VM when using this. By default, docker-machine maps port 22 of the boot2docker VM to a randomly selected port (e.g., 49417) on the physical host (it's also configured to only accept connections from localhost, but that's a separate discussion).

The docker-machine ssh <machine_name> command leverages this feature and executes a command like this behind-the-scenes:

/usr/bin/ssh -o PasswordAuthentication=no -o IdentitiesOnly=yes -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null -o LogLevel=quiet -o ConnectionAttempts=3 -o ConnectTimeout=10 -i /Users/jonathan.li/.docker/machine/machines/default/id_rsa -p 49417 docker@localhost

We can restore communication if we also forward the port used by the Docker daemon!

What's the catch?

The Docker daemon and client are secured with mutual authentication. docker-machine creates the certificates for both the daemon and the client. Unfortunately, the certificate created for the Docker daemon only contains the IP address of the host-only network adapter (e.g., 192.168.99.100). This means that the Docker client will only trust the certificate if it communicates with the Docker daemon over the host-only network adapter...which is broken by the Cisco AnyConnect VPN agent.

$ openssl x509 -noout -text -in server.pem
Certificate:
        Subject: O=default
        Subject Public Key Info:
            Public Key Algorithm: rsaEncryption
                Public-Key: (2048 bit)
                Modulus:
                    <SNIP>
                Exponent: 65537 (0x10001)
        X509v3 extensions:
            X509v3 Key Usage: critical
                Digital Signature, Key Encipherment, Key Agreement
            X509v3 Extended Key Usage:
                TLS Web Client Authentication, TLS Web Server Authentication
            X509v3 Basic Constraints: critical
                CA:FALSE
            X509v3 Subject Alternative Name:
                IP Address:192.168.99.100
    Signature Algorithm: sha256WithRSAEncryption
         <SNIP>

If we also forward the Docker daemon port (i.e., 2376) between the guest VM and the physical host, the last hurdle to enabling communication between the Docker daemon and client is to create a new certificate that also supports localhost and 127.0.0.1.

Now what?

This script will help you:

  • Create a new boot2docker VM (or apply the necessary changes to an existing VM)
  • Add a port forwarding rule for the Docker daemon port
  • Create and deploy a new certificate for the Docker daemon
  • Add the environment variables needed by the Docker client

Requirements for creating a new VM

  • You must be disconnected from the VPN NOTE: This requirement does not apply when updating an existing VM

    $ ./docker-vpn-helper
    Please disconnect from the VPN and re-run the command: ./docker-vpn-helper
  • All VirtualBox processes must be stopped (i.e., all VMs and the GUI)

    $ ./docker-vpn-helper
    Please stop all VirtualBox.app processes
    33540 33542 33571 36180
  • Your sudo password must be entered when restarting the VirtualBox kernel modules

    $ ./docker-vpn-helper
    =====Restarting VirtualBox kernel modules=====
    Password:

What's it look like?

  1. Let's make sure we're starting fresh

    $ docker-machine ls
    NAME   ACTIVE   DRIVER   STATE   URL   SWARM
  2. Run the helper script

    $ ./docker-vpn-helper
    =====Restarting VirtualBox kernel modules=====
    Password:
    Unloading VBoxUSB.kext
    Unloading VBoxNetFlt.kext
    Unloading VBoxNetAdp.kext
    Unloading VBoxDrv.kext
    Loading VBoxDrv.kext
    Loading VBoxUSB.kext
    Loading VBoxNetFlt.kext
    Loading VBoxNetAdp.kext
    =====[default] Creating Docker host=====
    Creating VirtualBox VM...
    Creating SSH key...
    Starting VirtualBox VM...
    Starting VM...
    To see how to connect Docker to this machine, run: docker-machine env default
    =====[default] Inserting Docker daemon port forwarding rule=====
    =====[default] Creating a new Docker daemon certificate=====
    Signature ok
    subject=/CN=localhost
    Getting CA Private Key
    =====[default] Deploying Certificate to Docker host=====
    -----BEGIN CERTIFICATE-----
    <snip>
    -----END CERTIFICATE-----
    =====[default] Restarting Docker daemon=====
    Need TLS certs for default,127.0.0.1,10.0.2.15,192.168.99.100
    -------------------
    =====Add these to your environment=====
    export DOCKER_TLS_VERIFY=1
    export DOCKER_HOST=tcp://localhost:2376
    export DOCKER_CERT_PATH=/Users/jonathan.li/.docker/machine/machines/default
    export DOCKER_MACHINE_NAME=default
  3. Let's make sure a VM was created

    $ docker-machine ls
    NAME      ACTIVE   DRIVER       STATE     URL                         SWARM
    default            virtualbox   Running   tcp://192.168.99.100:2376
  4. Export the environment variables and test it out

    $ export DOCKER_TLS_VERIFY=1
    $ export DOCKER_HOST=tcp://localhost:2376
    $ export DOCKER_CERT_PATH=/Users/jonathan.li/.docker/machine/machines/default
    $ export DOCKER_MACHINE_NAME=default
    
    $ docker version
    Client:
     Version:      1.8.2
     API version:  1.20
     Go version:   go1.4.2
     Git commit:   0a8c2e3
     Built:        Thu Sep 10 19:10:10 UTC 2015
     OS/Arch:      darwin/amd64
    
    Server:
     Version:      1.8.2
     API version:  1.20
     Go version:   go1.4.2
     Git commit:   0a8c2e3
     Built:        Thu Sep 10 19:10:10 UTC 2015
     OS/Arch:      linux/amd64

What's it look like...when something goes wrong?

  • If you forget to export the environment variables

    $ docker images
    Get http:///var/run/docker.sock/v1.20/images/json: dial unix /var/run/docker.sock: no such file or directory.
    * Are you trying to connect to a TLS-enabled daemon without TLS?
    * Is your docker daemon up and running?
  • If you're on the VPN and export the environment variables from docker-machine env <machine_name> instead of from this helper script NOTE: This'll work fine if you've recently rebooted and have never connected to the VPN

    $ docker images
    An error occurred trying to connect: Get https://192.168.99.100:2376/v1.20/images/json: dial tcp 192.168.99.100:2376: i/o timeout
  • If the Docker daemon's certificate doesn't include localhost or 127.0.0.1

    $ export DOCKER_TLS_VERIFY=1
    $ export DOCKER_HOST=tcp://localhost:2376
    $ export DOCKER_CERT_PATH=/Users/jonathan.li/.docker/machine/machines/default
    $ export DOCKER_MACHINE_NAME=default
    
    $ docker images
    An error occurred trying to connect: Get https://localhost:2376/v1.20/images/json: x509: certificate is valid for , not localhost

    NOTE: You can fix this by re-running this helper script

    $ ./docker-vpn-helper
    =====[default] Creating a new Docker daemon certificate=====
    Signature ok
    subject=/CN=localhost
    Getting CA Private Key
    =====[default] Deploying Certificate to Docker host=====
    -----BEGIN CERTIFICATE-----
    <snip>
    -----END CERTIFICATE-----
    =====[default] Restarting Docker daemon=====
    Need TLS certs for default,127.0.0.1,10.0.2.15,192.168.99.100
    -------------------
    =====Add these to your environment=====
    export DOCKER_TLS_VERIFY=1
    export DOCKER_HOST=tcp://localhost:2376
    export DOCKER_CERT_PATH=/Users/jonathan.li/.docker/machine/machines/default
    export DOCKER_MACHINE_NAME=default
    
    $ docker images
    REPOSITORY          TAG                 IMAGE ID            CREATED             VIRTUAL SIZE

About

No description, website, or topics provided.

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Contributors 4

  •  
  •  
  •  
  •  

Languages