Merge pull request restic#4586 from Gelma/typos

Fix typos

CHANGELOG.md

@@ -2684,7 +2684,7 @@ Details
  * Enhancement #3106: Parallelize scan of snapshot content in `copy` and `prune`
 
    The `copy` and `prune` commands used to traverse the directories of snapshots one by one to find
-   used data. This snapshot traversal is now parallized which can speed up this step several
+   used data. This snapshot traversal is now parallelized which can speed up this step several
    times.
 
    In addition the `check` command now reports how many snapshots have already been processed.
@@ -2784,7 +2784,7 @@ Details
 
  * Bugfix #1756: Mark repository files as read-only when using the local backend
 
-   Files stored in a local repository were marked as writeable on the filesystem for non-Windows
+   Files stored in a local repository were marked as writable on the filesystem for non-Windows
    systems, which did not prevent accidental file modifications outside of restic. In addition,
    the local backend did not work with certain filesystems and network mounts which do not permit
    modifications of file permissions.
@@ -2874,8 +2874,7 @@ Details
    an exclusive lock through a filesystem snapshot. Restic was unable to backup those files
    before. This update enables backing up these files.
 
-   This needs to be enabled explicitely using the --use-fs-snapshot option of the backup
-   command.
+   This needs to be enabled explicitly using the --use-fs-snapshot option of the backup command.
 
    https://github.com/restic/restic/issues/340
    https://github.com/restic/restic/pull/2274
@@ -3079,7 +3078,7 @@ Details
 
  * Bugfix #2668: Don't abort the stats command when data blobs are missing
 
-   Runing the stats command in the blobs-per-file mode on a repository with missing data blobs
+   Running the stats command in the blobs-per-file mode on a repository with missing data blobs
    previously resulted in a crash.
 
    https://github.com/restic/restic/pull/2668
@@ -3454,7 +3453,7 @@ Details
    check will be disabled if the --ignore-inode flag was given.
 
    If this change causes problems for you, please open an issue, and we can look in to adding a
-   seperate flag to disable just the ctime check.
+   separate flag to disable just the ctime check.
 
    https://github.com/restic/restic/issues/2179
    https://github.com/restic/restic/pull/2212
@@ -3826,7 +3825,7 @@ Details
  * Enhancement #1876: Display reason why forget keeps snapshots
 
    We've added a column to the list of snapshots `forget` keeps which details the reasons to keep a
-   particuliar snapshot. This makes debugging policies for forget much easier. Please remember
+   particular snapshot. This makes debugging policies for forget much easier. Please remember
    to always try things out with `--dry-run`!
 
    https://github.com/restic/restic/pull/1876
@@ -4139,7 +4138,7 @@ Summary
  * Enh #1665: Improve cache handling for `restic check`
  * Enh #1709: Improve messages `restic check` prints
  * Enh #1721: Add `cache` command to list cache dirs
- * Enh #1735: Allow keeping a time range of snaphots
+ * Enh #1735: Allow keeping a time range of snapshots
  * Enh #1758: Allow saving OneDrive folders in Windows
  * Enh #1782: Use default AWS credentials chain for S3 backend
 
@@ -4339,7 +4338,7 @@ Details
    https://github.com/restic/restic/issues/1721
    https://github.com/restic/restic/pull/1749
 
- * Enhancement #1735: Allow keeping a time range of snaphots
+ * Enhancement #1735: Allow keeping a time range of snapshots
 
    We've added the `--keep-within` option to the `forget` command. It instructs restic to keep
    all snapshots within the given duration since the newest snapshot. For example, running
@@ -4440,7 +4439,7 @@ Details
    HTTP) and returning an error when the file already exists.
 
    This is not accurate, the file could have been created between the HTTP request testing for it,
-   and when writing starts, so we've relaxed this requeriment, which saves one additional HTTP
+   and when writing starts, so we've relaxed this requirement, which saves one additional HTTP
    request per newly added file.
 
    https://github.com/restic/restic/pull/1623
@@ -4463,7 +4462,7 @@ restic users. The changes are ordered by importance.
 Summary
 -------
 
- * Fix #1506: Limit bandwith at the http.RoundTripper for HTTP based backends
+ * Fix #1506: Limit bandwidth at the http.RoundTripper for HTTP based backends
  * Fix #1512: Restore directory permissions as the last step
  * Fix #1528: Correctly create missing subdirs in data/
  * Fix #1589: Complete intermediate index upload
@@ -4484,7 +4483,7 @@ Summary
 Details
 -------
 
- * Bugfix #1506: Limit bandwith at the http.RoundTripper for HTTP based backends
+ * Bugfix #1506: Limit bandwidth at the http.RoundTripper for HTTP based backends
 
    https://github.com/restic/restic/issues/1506
    https://github.com/restic/restic/pull/1511
@@ -4537,8 +4536,8 @@ Details
  * Bugfix #1595: Backup: Remove bandwidth display
 
    This commit removes the bandwidth displayed during backup process. It is misleading and
-   seldomly correct, because it's neither the "read bandwidth" (only for the very first backup)
-   nor the "upload bandwidth". Many users are confused about (and rightly so), c.f. #1581, #1033,
+   seldom correct, because it's neither the "read bandwidth" (only for the very first backup) nor
+   the "upload bandwidth". Many users are confused about (and rightly so), c.f. #1581, #1033,
    #1591
 
    We'll eventually replace this display with something more relevant when the new archiver code
@@ -4807,7 +4806,7 @@ Details
 
    We've added a local cache for metadata so that restic doesn't need to load all metadata
    (snapshots, indexes, ...) from the repo each time it starts. By default the cache is active, but
-   there's a new global option `--no-cache` that can be used to disable the cache. By deafult, the
+   there's a new global option `--no-cache` that can be used to disable the cache. By default, the
    cache a standard cache folder for the OS, which can be overridden with `--cache-dir`. The cache
    will automatically populate, indexes and snapshots are saved as they are loaded. Cache
    directories for repos that haven't been used recently can automatically be removed by restic
@@ -4893,7 +4892,7 @@ Details
 
  * Enhancement #1319: Make `check` print `no errors found` explicitly
 
-   The `check` command now explicetly prints `No errors were found` when no errors could be found.
+   The `check` command now explicitly prints `No errors were found` when no errors could be found.
 
    https://github.com/restic/restic/issues/1303
    https://github.com/restic/restic/pull/1319

CONTRIBUTING.md

@@ -61,7 +61,7 @@ uploading it somewhere or post only the parts that are really relevant.
 If restic gets stuck, please also include a stacktrace in the description.
 On non-Windows systems, you can send a SIGQUIT signal to restic or press
 `Ctrl-\` to achieve the same result. This causes restic to print a stacktrace
-and then exit immediatelly. This will not damage your repository, however,
+and then exit immediately. This will not damage your repository, however,
 it might be necessary to manually clean up stale lock files using
 `restic unlock`.
 

changelog/0.10.0_2020-09-19/pull-2668

@@ -1,6 +1,6 @@
 Bugfix: Don't abort the stats command when data blobs are missing
 
-Runing the stats command in the blobs-per-file mode on a repository with
+Running the stats command in the blobs-per-file mode on a repository with
 missing data blobs previously resulted in a crash.
 
 https://github.com/restic/restic/pull/2668

changelog/0.11.0_2020-11-05/issue-1756

@@ -1,6 +1,6 @@
 Bugfix: Mark repository files as read-only when using the local backend
 
-Files stored in a local repository were marked as writeable on the
+Files stored in a local repository were marked as writable on the
 filesystem for non-Windows systems, which did not prevent accidental file
 modifications outside of restic. In addition, the local backend did not work
 with certain filesystems and network mounts which do not permit modifications

changelog/0.11.0_2020-11-05/issue-340

@@ -5,7 +5,7 @@ another process using an exclusive lock through a filesystem snapshot. Restic
 was unable to backup those files before. This update enables backing up these
 files.
 
-This needs to be enabled explicitely using the --use-fs-snapshot option of the
+This needs to be enabled explicitly using the --use-fs-snapshot option of the
 backup command.
 
 https://github.com/restic/restic/issues/340

changelog/0.12.0_2021-02-14/pull-3106

@@ -2,7 +2,7 @@ Enhancement: Parallelize scan of snapshot content in `copy` and `prune`
 
 The `copy` and `prune` commands used to traverse the directories of
 snapshots one by one to find used data. This snapshot traversal is
-now parallized which can speed up this step several times.
+now parallelized which can speed up this step several times.
 
 In addition the `check` command now reports how many snapshots have
 already been processed.

changelog/0.8.0_2017-11-26/pull-1040

@@ -3,7 +3,7 @@ Enhancement: Add local metadata cache
 We've added a local cache for metadata so that restic doesn't need to load
 all metadata (snapshots, indexes, ...) from the repo each time it starts. By
 default the cache is active, but there's a new global option `--no-cache`
-that can be used to disable the cache. By deafult, the cache a standard
+that can be used to disable the cache. By default, the cache a standard
 cache folder for the OS, which can be overridden with `--cache-dir`.  The
 cache will automatically populate, indexes and snapshots are saved as they
 are loaded. Cache directories for repos that haven't been used recently can

changelog/0.8.0_2017-11-26/pull-1319

@@ -1,6 +1,6 @@
 Enhancement: Make `check` print `no errors found` explicitly
 
-The `check` command now explicetly prints `No errors were found` when no errors
+The `check` command now explicitly prints `No errors were found` when no errors
 could be found.
 
 https://github.com/restic/restic/pull/1319

changelog/0.8.2_2018-02-17/issue-1506

@@ -1,4 +1,4 @@
-Bugfix: Limit bandwith at the http.RoundTripper for HTTP based backends
+Bugfix: Limit bandwidth at the http.RoundTripper for HTTP based backends
 
 https://github.com/restic/restic/issues/1506
 https://github.com/restic/restic/pull/1511

changelog/0.8.2_2018-02-17/pull-1595

@@ -1,7 +1,7 @@
 Bugfix: backup: Remove bandwidth display
 
 This commit removes the bandwidth displayed during backup process. It is
-misleading and seldomly correct, because it's neither the "read
+misleading and seldom correct, because it's neither the "read
 bandwidth" (only for the very first backup) nor the "upload bandwidth".
 Many users are confused about (and rightly so), c.f. #1581, #1033, #1591
 

changelog/0.8.3_2018-02-26/pull-1623

@@ -6,7 +6,7 @@ that means making a request (e.g. via HTTP) and returning an error when the
 file already exists.
 
 This is not accurate, the file could have been created between the HTTP request
-testing for it, and when writing starts, so we've relaxed this requeriment,
+testing for it, and when writing starts, so we've relaxed this requirement,
 which saves one additional HTTP request per newly added file.
 
 https://github.com/restic/restic/pull/1623

changelog/0.9.0_2018-05-21/pull-1735

@@ -1,4 +1,4 @@
-Enhancement: Allow keeping a time range of snaphots
+Enhancement: Allow keeping a time range of snapshots
 
 We've added the `--keep-within` option to the `forget` command. It instructs
 restic to keep all snapshots within the given duration since the newest

changelog/0.9.3_2018-10-13/pull-1876

@@ -1,7 +1,7 @@
 Enhancement: Display reason why forget keeps snapshots
 
 We've added a column to the list of snapshots `forget` keeps which details the
-reasons to keep a particuliar snapshot. This makes debugging policies for
+reasons to keep a particular snapshot. This makes debugging policies for
 forget much easier. Please remember to always try things out with `--dry-run`!
 
 https://github.com/restic/restic/pull/1876

changelog/0.9.6_2019-11-22/issue-2179

@@ -9,7 +9,7 @@ file should be noticed, and the modified file will be backed up. The ctime check
 will be disabled if the --ignore-inode flag was given.
 
 If this change causes problems for you, please open an issue, and we can look in
-to adding a seperate flag to disable just the ctime check.
+to adding a separate flag to disable just the ctime check.
 
 https://github.com/restic/restic/issues/2179
 https://github.com/restic/restic/pull/2212

cmd/restic/cmd_check.go

@@ -417,7 +417,7 @@ func selectPacksByBucket(allPacks map[restic.ID]int64, bucket, totalBuckets uint
 	return packs
 }
 
-// selectRandomPacksByPercentage selects the given percentage of packs which are randomly choosen.
+// selectRandomPacksByPercentage selects the given percentage of packs which are randomly chosen.
 func selectRandomPacksByPercentage(allPacks map[restic.ID]int64, percentage float64) map[restic.ID]int64 {
 	packCount := len(allPacks)
 	packsToCheck := int(float64(packCount) * (percentage / 100.0))

cmd/restic/cmd_check_test.go

@@ -71,7 +71,7 @@ func TestSelectPacksByBucket(t *testing.T) {
 	var testPacks = make(map[restic.ID]int64)
 	for i := 1; i <= 10; i++ {
 		id := restic.NewRandomID()
-		// ensure relevant part of generated id is reproducable
+		// ensure relevant part of generated id is reproducible
 		id[0] = byte(i)
 		testPacks[id] = 0
 	}
@@ -124,7 +124,7 @@ func TestSelectRandomPacksByPercentage(t *testing.T) {
 }
 
 func TestSelectNoRandomPacksByPercentage(t *testing.T) {
-	// that the a repository without pack files works
+	// that the repository without pack files works
 	var testPacks = make(map[restic.ID]int64)
 	selectedPacks := selectRandomPacksByPercentage(testPacks, 10.0)
 	rtest.Assert(t, len(selectedPacks) == 0, "Expected 0 selected packs")
@@ -158,7 +158,7 @@ func TestSelectRandomPacksByFileSize(t *testing.T) {
 }
 
 func TestSelectNoRandomPacksByFileSize(t *testing.T) {
-	// that the a repository without pack files works
+	// that the repository without pack files works
 	var testPacks = make(map[restic.ID]int64)
 	selectedPacks := selectRandomPacksByFileSize(testPacks, 10, 500)
 	rtest.Assert(t, len(selectedPacks) == 0, "Expected 0 selected packs")

cmd/restic/cmd_debug.go

@@ -290,7 +290,7 @@ func tryRepairWithBitflip(ctx context.Context, key *crypto.Key, input []byte, by
 	})
 	err := wg.Wait()
 	if err != nil {
-		panic("all go rountines can only return nil")
+		panic("all go routines can only return nil")
 	}
 
 	if !found {

cmd/restic/cmd_prune.go

@@ -406,7 +406,7 @@ func packInfoFromIndex(ctx context.Context, idx restic.MasterIndex, usedBlobs re
 	})
 
 	// if duplicate blobs exist, those will be set to either "used" or "unused":
-	// - mark only one occurence of duplicate blobs as used
+	// - mark only one occurrence of duplicate blobs as used
 	// - if there are already some used blobs in a pack, possibly mark duplicates in this pack as "used"
 	// - if there are no used blobs in a pack, possibly mark duplicates as "unused"
 	if hasDuplicates {
@@ -415,7 +415,7 @@ func packInfoFromIndex(ctx context.Context, idx restic.MasterIndex, usedBlobs re
 			bh := blob.BlobHandle
 			count, ok := usedBlobs[bh]
 			// skip non-duplicate, aka. normal blobs
-			// count == 0 is used to mark that this was a duplicate blob with only a single occurence remaining
+			// count == 0 is used to mark that this was a duplicate blob with only a single occurrence remaining
 			if !ok || count == 1 {
 				return
 			}
@@ -424,7 +424,7 @@ func packInfoFromIndex(ctx context.Context, idx restic.MasterIndex, usedBlobs re
 			size := uint64(blob.Length)
 			switch {
 			case ip.usedBlobs > 0, count == 0:
-				// other used blobs in pack or "last" occurence ->  transition to used
+				// other used blobs in pack or "last" occurrence ->  transition to used
 				ip.usedSize += size
 				ip.usedBlobs++
 				ip.unusedSize -= size
@@ -434,7 +434,7 @@ func packInfoFromIndex(ctx context.Context, idx restic.MasterIndex, usedBlobs re
 				stats.blobs.used++
 				stats.size.duplicate -= size
 				stats.blobs.duplicate--
-				// let other occurences remain marked as unused
+				// let other occurrences remain marked as unused
 				usedBlobs[bh] = 1
 			default:
 				// remain unused and decrease counter

cmd/restic/cmd_snapshots.go

@@ -290,7 +290,7 @@ func PrintSnapshotGroupHeader(stdout io.Writer, groupKeyJSON string) error {
 	return nil
 }
 
-// Snapshot helps to print Snaphots as JSON with their ID included.
+// Snapshot helps to print Snapshots as JSON with their ID included.
 type Snapshot struct {
 	*restic.Snapshot
 

cmd/restic/global.go

@@ -127,7 +127,7 @@ func init() {
 	f.StringVarP(&globalOptions.KeyHint, "key-hint", "", "", "`key` ID of key to try decrypting first (default: $RESTIC_KEY_HINT)")
 	f.StringVarP(&globalOptions.PasswordCommand, "password-command", "", "", "shell `command` to obtain the repository password from (default: $RESTIC_PASSWORD_COMMAND)")
 	f.BoolVarP(&globalOptions.Quiet, "quiet", "q", false, "do not output comprehensive progress report")
-	// use empty paremeter name as `-v, --verbose n` instead of the correct `--verbose=n` is confusing
+	// use empty parameter name as `-v, --verbose n` instead of the correct `--verbose=n` is confusing
 	f.CountVarP(&globalOptions.Verbose, "verbose", "v", "be verbose (specify multiple times or a level using --verbose=n``, max level/times is 2)")
 	f.BoolVar(&globalOptions.NoLock, "no-lock", false, "do not lock the repository, this allows some operations on read-only repositories")
 	f.DurationVar(&globalOptions.RetryLock, "retry-lock", 0, "retry to lock the repository if it is already locked, takes a value like 5m or 2h (default: no retries)")

doc/faq.rst

@@ -74,7 +74,7 @@ $ restic backup --exclude "~/documents" ~
 This command will result in a complete backup of the current logged in user's home directory and it won't exclude the folder ``~/documents/`` - which is not what the user wanted to achieve.
 The problem is how the path to ``~/documents`` is passed to restic.
 
-In order to spot an issue like this, you can make use of the following ruby command preceding your restic command.
+In order to spot an issue like this, you can make use of the following ruby command preceeding your restic command.
 
 ::
 

doc/fish-completion.fish

@@ -79,7 +79,7 @@ function __restic_clear_perform_completion_once_result
     __restic_debug ""
     __restic_debug "========= clearing previously set __restic_perform_completion_once_result variable =========="
     set --erase __restic_perform_completion_once_result
-    __restic_debug "Succesfully erased the variable __restic_perform_completion_once_result"
+    __restic_debug "Successfully erased the variable __restic_perform_completion_once_result"
 end
 
 function __restic_requires_order_preservation

helpers/prepare-release/main.go

@@ -379,7 +379,7 @@ func readdir(dir string) []string {
 }
 
 func sha256sums(inputDir, outputFile string) {
-	msg("runnnig sha256sum in %v", inputDir)
+	msg("running sha256sum in %v", inputDir)
 
 	filenames := readdir(inputDir)
 

internal/archiver/archiver.go

@@ -267,7 +267,7 @@ func (arch *Archiver) SaveDir(ctx context.Context, snPath string, dir string, fi
 
 // FutureNode holds a reference to a channel that returns a FutureNodeResult
 // or a reference to an already existing result. If the result is available
-// immediatelly, then storing a reference directly requires less memory than
+// immediately, then storing a reference directly requires less memory than
 // using the indirection via a channel.
 type FutureNode struct {
 	ch  <-chan futureNodeResult

internal/backend/b2/b2.go

@@ -31,7 +31,7 @@ type b2Backend struct {
 	canDelete bool
 }
 
-// Billing happens in 1000 item granlarity, but we are more interested in reducing the number of network round trips
+// Billing happens in 1000 item granularity, but we are more interested in reducing the number of network round trips
 const defaultListMaxItems = 10 * 1000
 
 // ensure statically that *b2Backend implements backend.Backend.

internal/backend/backend.go

@@ -18,7 +18,7 @@ type Backend interface {
 	// repository.
 	Location() string
 
-	// Connections returns the maxmimum number of concurrent backend operations.
+	// Connections returns the maximum number of concurrent backend operations.
 	Connections() uint
 
 	// Hasher may return a hash function for calculating a content hash for the backend