Download a pre-build release and flash it to a sd card (e.g. using Etcher)
Clone Repo and submodules
git clone https://github.com/moritzmhmk/webdisplay
cd webdisplay
git submodule init
git submodule updateRun make xconfig, make changes, save and then close window.
Run make all and wait about 2h ☕
The resulting image can be found in output/images.
Configuration files can be found on the boot partition of the SD card.
webDisplayConfig.js - is a javascript file read by QML
currently supported configurations:
- url: webpage to display
wpa_supplicant - is a folder containing configurations in the format wpa_supplicant-INTERFACE.conf
These are normal wpa_supplicant config files. INTERFACE should be wlan0 if only one wifi dongle is attached.
buildroot-submodule is provided under the GPLv3 or later. The licence is provided in the LICENCE file. Note that this licence only covers the files provided by buildroot-submodule. It does not cover buildroot (which is GPLv2 or later) nor any software installed by buildroot (they have their own licences) nor your own code (which you are free to licence as you want).
All code written by me is provided under the MIT License.