Update README.md

README.md

@@ -77,7 +77,7 @@ Next, `cd` into the shairport-sync directory and execute the following commands:
 Choose the appropriate `--with-*` options:
 
 - `--with-alsa` for the ALSA audio back end. This is required.
-- `--with-avahi` or `--with-tinysvcmdns` for mdns support. Avahi is a widely-used system-wide zero-configuration networking (zeroconf) service -- it may already be in your system. If you don't have Avahi, or similar, then consider including tinysvcmdns, which is a tiny zeroconf service embedded inside the shairport-sync application itself. To enable multicast for mDNS, you may have to add a default route with the following command: `route add -net 224.0.0.0 netmask 224.0.0.0 eth0` (substitute the correct network port for `eth0`). You should not have more than one zeroconf service on the same system -- bad things may happen, according to RFC 6762, §15.
+- `--with-avahi` or `--with-tinysvcmdns` for mdns support. Avahi is a widely-used system-wide zero-configuration networking (zeroconf) service -- it may already be in your system. If you don't have Avahi, or similar, then consider including tinysvcmdns, which is a tiny zeroconf service embedded inside the shairport-sync application itself. To enable multicast for `tinysvcmdns`, you may have to add a default route with the following command: `route add -net 224.0.0.0 netmask 224.0.0.0 eth0` (substitute the correct network port for `eth0`). You should not have more than one zeroconf service on the same system -- bad things may happen, according to RFC 6762, §15.
 - `--with-ssl=openssl` or `--with-ssl=polarssl` for encryption and related utilities using either OpenSSL or PolarSSL.
 - `--with-soxr` for libsoxr-based resampling.
 - `--with-piddir` for specifying where the PID file should be stored. This directory is normally chosen automatically. The directory must be writable. If you use this option, you may have to edit the init script to search for the PID file in your new location.