This action primary aim is to create a Windows Dev Drive on your behalf and expose its location via GitHub Environment Variables.

Dev Drives use ReFS under the hood to provide optimizations that are targeted for developer workflows. By using a dev drive, you can increase performance significantly on a variety of developer workloads.

Workloads that involve high IO, such as building and testing will see an improvement of about 25% or more on average, which can translate to substantial speed, quota, and cost savings. See related blog post.

You can still decide to use something else than ReFS and get speed benefits of a Virtual Hard Disk (VHDX) that this action creates for you.

Just add the following line to the steps: list in your GitHub Actions yaml:

- uses: samypr100/setup-dev-drive@v3

You can optionally pass parameters to the action as follows:

- uses: samypr100/setup-dev-drive@v3
  with:
    drive-size: 1GB
    drive-format: ReFS
    drive-type: Dynamic
    drive-path: "dev_drive.vhdx"
    mount-path: "my_mount_path"
    mount-if-exists: false
    workspace-copy: false

This action is compatible with windows-2022 runners or above.

For more examples, take a look in the dedicated examples section.

Allows you to configure the dev drive size. This is subject to the limit of space available on your runner. The default public runners roughly hold about 15GB of space, so it's suggested you keep your drive size below that limit, or you may encounter errors.

The format of the drive, by default ReFS but it can be any of FAT, FAT32, exFAT, NTFS, ReFS as provided by Format-Volume.

The path to the dev drive VHDX file, defaults to the relative path dev_drive.vhdx.

When a relative path is provided, it will be relative to C:\, D:\ or the default workspace drive letter on the runner. Hence, dev_drive.vhdx will likely resolve to C:\dev_drive.vhdx or D:\dev_drive.vhdx.

When an absolute path is provided, make sure it's located outside ${{ github.workspace }} otherwise workspace-copy will issue a warning. This action will ignore copying the dev drive in such scenarios.

Determines the type of drive, Fixed or Dynamic. There are performance tradeoffs between both. For the purposes of this action Dynamic is used by default for flexibility.

Dynamic is useful when you want to cache the disk across job runs as it yields a smaller payload to cache when the job ends.

Fixed gives you a notable performance boost, but there's a small creation overhead.

By default, this option is not set.

Mounts the dev drive at the specified mount-path location. This option can be useful when you want to mount your dev drive inside the GitHub workspace via ${{ github.workspace }}/my_mount_path, my_mount_path, or equivalent.

This option is only supported when using the NTFS or ReFS drive formats, otherwise it will fall back to a drive letter instead. Furthermore, when a relative path is specified it the mount path will end up being relative to your current working directory.

Warning: Setting mount-path to exactly ${{ github.workspace }} and then running actions/checkout will try to wipe your mount folder, causing an error that looks like File was unable to be removed Error: EPERM: operation not permitted, lstat '${{ github.workspace }}\System Volume Information' See actions/checkout#430 for more details on this non-configurable behavior by actions/checkout.

In such cases, it is recommended you run actions/checkout before this action. You can also leverage workspace-copy: true to copy your contents as long as your mount path is outside ${{ github.workspace }}.

Mounts the dev drive if it already exists at drive-path location. When it does not exist, it will fall back to creating one at that location instead. This is useful when your workflow caches the dev drive for further use in other jobs via actions/cache.

This copies ${{ github.workspace }} to your dev drive. Usually when you use actions/checkout it creates a shallow copy of your commit to ${{ github.workspace }}. When workspace-copy is set to true, this action will copy your workspace into your dev drive allowing you move your workload to be purely on the dev drive.

This option was needed since actions/checkout does not allow cloning outside ${{ github.workspace }}. See actions/checkout#197.

This option is compatible with mount-path as long as the mount path is not directly located inside your GitHub workspace (e.g. ${{ github.workspace }}/../my_mount_path).

These environment variables are meant to be used along working-directory to make sure your workflow commands are executing relative to your dev drive.

Contains the path to your dev drive of the form <DRIVE_LETTER>: or the canonical mount-path. For example, if the dev drive assigned letter is E, ${{ env.DEV_DRIVE }} will contain E:.

When mount-path is set, the value will be the resolved canonical path of the mount path. For example if your specified mount path is my_mount_path, the value will look like D:\a\path\to\my_mount_path.

This env var is always set.

When workspace-copy is set to true, this contains the workspace location as represented by the dev drive location. For example if your GitHub workspace is D:\a\<project-name>\<project-name> your dev drive workspace will be E:\<project-name> by default assuming the drive letter is E.

When mount-path is set, this behaves the same as described above with the caveat that the mount-path location must be outside your GitHub workspace (e.g. ${{ github.workspace }}/../my_mount_path).

This env var is only set if-only-if workspace-copy option is set. Otherwise, it's expected that you'd use DEV_DRIVE env var instead.

The canonical location of the VHDX file.

When drive-path is set to a relative path like my_drive.vhdx the location in this variable will likely be D:\my_drive.vhdx.

When drive-path is set to an absolute path like D:\path\to\my_drive.vhdx the location in this variable will be the same but normalized as given by path.normalize.

This env var is always set.

- uses: actions/checkout@v4
- uses: samypr100/setup-dev-drive@v3
  with:
    workspace-copy: true
- name: Install dependencies in dev drive
  working-directory: ${{ env.DEV_DRIVE_WORKSPACE }}
  run: npm install

- uses: samypr100/setup-dev-drive@v3
- name: Install rust toolchain in dev drive
  env:
    CARGO_HOME: ${{ env.DEV_DRIVE }}/.cargo
    RUSTUP_HOME: ${{ env.DEV_DRIVE }}/.rustup
  run: rustup show

Inspired by actions/cache#752 (comment)

- uses: actions/checkout@v4
- uses: actions/cache@v4
  with:
    path: "C:\\bazel_cache.vhdx"
    key: bazel-cache-windows
- uses: samypr100/setup-dev-drive@v3
  with:
    drive-path: "C:\\bazel_cache.vhdx"
    drive-format: NTFS
    mount-if-exists: true
- name: Build and test
  run: bazelisk --output_base=$env:DEV_DRIVE test --config=windows //...
# ...

This action currently only works on windows runners. In particular, this action will only work with windows-2022 or windows-latest runners.

For native dev drive support, 10.0.22621 build or later of windows is required. This action will gracefully still work even if native dev drive is not available.

On cases where runners may still not be updated to meet the minimum version, you can still get speed gains by using this action due to ReFS and VHDX usage.

Thanks to Paco Sevilla for the idea to use a VHDX within a GitHub Workflow.