This region device tree is intended for the usage in a LineageOS or similar building environment.
If you are looking for a special device tree for the usage in a TWRP or similar environment head over to https://github.com/Meetoul/twrp_device_Unihertz_Jelly2.
| Basic | Spec Sheet |
|---|---|
| CPU | Octa-core |
| Chipset | Mediatek Helio P60 |
| GPU | Mali-G72 MP3 |
| Memory | 6 GB RAM |
| Shipped Android Version | 10 |
| Storage | 128 GB |
| Battery | Non-removable Li-Po 2000 mAh battery |
| Display | 480x854 pixels, 3.0 inch |
| Camera (Rear - Main) | 16MP |
| Camera (Front) | 8MP |
Additionally to this region device tree, you'll need the common device tree
- HOW-TO-BUILD.md - Building instructions for LineageOS 17.1.
- HOW-TO-INSTALL.md - Installation instructions for the Jelly2.
- HOW-TO-UPDATE.md - Update instructions for the Jelly2.
- HOW-TO-EXTRACT_FILES.md - Instructions to extract files directly from the Jelly2 stock rom files.
- HOW-TO-EXTRACT_SEPOLICY.md - A little guide to extract sepolicy rules from stock or phone.
- HOW-TO-FLASH-STOCK.md - Instructions on how to use the SP Flash Tool for MTK based devices.
- HOW-TO-FLASH-SUPER.md - Instructions on how to modify super.img and flashing it onto the device.
- ADeadTrousers - I used his AtomL/XL device tree as a base for this one. Phones hardware are almost identical, so device trees are almost identical as well.