Skip to content

Calculates the fluxes for branch chambers, gases measured by the Aerodyne QCL

License

Notifications You must be signed in to change notification settings

kebasaa/Laser-chamber-fluxes

Repository files navigation

DOI License: GPL v3

Laser-chamber-fluxes

A python notebook to merge data from chamber systems, with gas concentrations of H2O, CO2, COS and CO measured using the Aerodyne Mini-TILDAS OCS/COS Monitor QCL Laser (https://www.aerodyne.com/wp-content/uploads/2021/11/OCS_COS.pdf). Data is gathered as follows:

  1. Gas concentrations: Aerodyne's built-in computer
  2. Ambient concentration of CO2 and H2O: LI-COR LI-7000 infrared gas analyser (IRGA) which is part of a parallel system
  3. Photosynthetically active radiation, i.e. PAR: 1st Campbell CR1000 datalogger and
  4. Temperatures (air and leaf surface): 2nd Campbell CR1000 datalogger
  5. Thermocouples (e.g. air or surface): 3rd Campbell CR1000 datalogger

There are 2 notebooks in this project, and the data is organised as follows:

  1. Raw data is in folder 01_rawdata, and logfiles are in 00_additional_data
  2. 01_convert_files_v0.1.ipynb: This creates daily files in a standard format in the folder 02_preprocessed_data
  3. 02_laser_v0.1.ipynb: This merges all data, removes bad data using the logbooks and calculates fluxes in the folder 03_processed_data. Data in this folder is organised as follows:
    • raw_qc: Data at the raw temporal resolution, merged with the unnecessary parts removed (i.e. stabilisation time of the laser)
    • 1min: Of each measurement, the last 30-60 measurements in 1s intervals are taken. This folder contains averaged data of each measurement, with calculated fluxes.
    • stats_calibration: Statistics of the linear correlation done in daily steps. Each has the slope, intercept, R2, p-value, standard error and sample size (n).

Dependencies

Python Jupyter Notebook Pandas NumPy SciPy

The following python packages are required to read the FLIR files:

  • Pandas
  • Numpy
  • Scipy

How to Cite

Jonathan D. Muller. (2022). Laser-chamber-fluxes: Tool to calculate gas fluxes from chambers concentration measurements. DOI: 10.5281/zenodo.4117838 (URL: https://doi.org/10.5281/zenodo.4117838), Python notebook

DOI

License

This software is distributed under the GNU GPL version 3

About

Calculates the fluxes for branch chambers, gases measured by the Aerodyne QCL

Resources

License

Stars

Watchers

Forks

Packages

No packages published