Support package for the Nucleo-f401re board.

Running the examples

1. Clone this repository

Run

cargo run --example button-interrupt

If probe fails to flash your board you probably need to update the firmware on the onboard programmer. The updater can be found at: https://www.st.com/en/development-tools/stsw-link007.html

Board properties

• User led on PA5
• User button on PC13
• Serial port through ST-LINK on USART2, Tx: PA2 and Rx: PA3.

This repository is based on https://github.com/therealprof/stm32f407g-disc