Skip to content

hungrymonkey/i2c

Repository files navigation

I2C Boss-worker device

This repository contains various attempts to implement an I2C protocol with VHDL.

Only i2c.vhd and i2c_slave.vhd implementations work.

https://en.wikipedia.org/wiki/I%C2%B2C

Components

1. I2C Boss - Single Boss Design - i2c.vhd

Variable Type Description Keyword
bus_clk Int I2c Bus Clock Speed Cycles GENERIC
sys_clk Int System Clock Speed Cycles GENERIC
CLK Bit Alternating 0 or 1 signal PORT
RESET Bit Reset PORT
P Bit Pull Up Resistor PORT
SDA Bit Serial Data Line PORT
SCL Bit Stretch Clock PORT

2. Bitwise shiftregister - shift_reg.vhd

Variable Type Description Keyword
trigger Bit Bit that either store or output the memory PORT
input Bit Input bit PORT
output Bit Output Bit PORT

3. I2C Worker - Single Worker Design i2c_slave.vhd

Variable Type Description Keyword
sys_clk Int Clock on the entire device GENERIC
bus_clk Int I2c Bus Clock GENERIC
slave_addr 7 Bit Reference Address GENERIC
CLK Bit Clock PORT
RESET Bit Reset Bit PORT
SCL Bit Stretch Clock PORT
SDA Bit Input Output Bit PORT
P Byte 8 bit pull up resistor PORT

Glossary

  1. H - Pull up Resistor - https://en.wikipedia.org/wiki/Pull-up_resistor
  2. bit - 0 or 1 state
  3. byte - 8 bits

Releases

No releases published

Packages

No packages published