Roller Devices

Use the 'Roller Devices' (rollerDevices[]) configuration section to customise how your rolling motor devices are exposed to HomeKit.

See Supported Devices to see which devices can be customised using this section.

Configuration

The easiest way to customise these devices is via the Homebridge/HOOBS UI. However, if you prefer to edit your Homebridge config file manually then here is a list of the options and and examples:

Entry	Type	Required	Default	Min	Explanation
name	str	Yes	""		A label for this device, will be used as the HomeKit name if setting up a local device.
serialNumber	str	Yes	""		32 digit serial number (uuid) of the device.
connection	str	No	"default"		Connection method to use for this device. Must be one of: "default" - to use a hybrid connection of local control when possible or revert to the cloud when necessary "cloud" - only use cloud control "local" - only use local control
deviceUrl	str	No	""		IP address to use for the device when connection is local.
ignoreDevice	bool	No	false		If true, this accessory will be removed and ignored from HomeKit.
model	str	See 1	""		2 Required when device has been setup as local Set the model for this device. One of: "MRS100"
reversePolarity	bool	No	false		If true, the plugin will reverse the open/close commands that it sends.
firmwareRevision	str	No	""		For local devices, HomeKit will show this as the firmware version.
userkey	str	No	""		Override the user key for this device if it is registered to a different Meross account.
overrideLogging	str	No	"default"		Override global logging setting for this device. "default" - follows global setting "standard" for standard logging "debug" for debug logging "disable" to disable all accessory logging