Skip to content

A ChoiceScript clone that generates SGDK-compatible C source for the Sega Genesis

License

Notifications You must be signed in to change notification settings

haroldo-ok/choice4genesis

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

choice4genesis

This is a ChoiceScript clone that generates Sega Genesis ROMs. If can be used for visual novels or simple multimedia presentations.

It takes a bunch of scripts and images and, from that, it generates SGDK-compatible .c and .res files. Those are then compiled into a Sega Genesis compatible ROM, which can be run on an emulator or even on real hardware.

The syntax of the scripts is somewhat based on ChoiceScript, but it is not exactly the same.

Please note that this is an early work and progress, and it is not as stable or user-friendly as it is planned to become.

Indentation

Just like ChoiceScript, choice4genesis uses indentation to identify nested commands:

* choice
	# Say yes
		You said yes!
	# Say no
		You said no!

You can use any amount spaces or tabs to indent the code, but not both at the same time; the indentation character must be consistent.

Structure of the commands

Each command can take three basic types of parameters:

  • Positional parameters: are obligatory, and must be always inform right at the start of the command:
     * music "Actraiser - Fillmore.vgm"
    In the example above, the music command has one positional parameter: the file name.
  • Named parameters: are optional, and if informed, must be placed after the positional parameters; the positional parameters themselves can have one or more positional parameters:
     * image "Smiley.png", at(30, 3)
    In the example above, the image command has one positional parameter, the file name, and one named parameter, called at, which, in turn, has two positional parameters, x and y.
  • Flags: are optional, and, if informed, must be placed after the positional parameters:
     * clear background, foreground
    In the example above, the clear command comes with two flags: background and foreground.

Expressions

Many commands accept expressions as parameters; the expressions can contain the following operators:

  • Comparison:
    • Equality: variable = 33;
    • Non equal to: variable != 12;
    • Greater than: variable > 37;
    • Less than: variable < 98;
    • Greater or equal to: variable >= 56;
    • Greater or lesser than: variable <= 78.
  • Arithmetic:
    • Addition: variable + 48;
    • Subtraction: variable - 13;
    • Multiplication: variable * 89;
    • Division: variable / 75;
    • Negation: -variable.
  • Logic:
    • And: (variable > 32) and (variable < 64);
    • Or: (variable < 15) or (variable > 32);
    • Not: !(variable > 31).
  • Constants:
    • Numeric: 123, 456;
    • Logical: true, false;
    • String: "This is a string.".

Commands implemented so far

font

Loads a .png file containing the 8x8 font. Fonts will use palette #1.

Positional parameters:

  • fileName: a string pointing to the .png file to use.

Example:

* font "damieng.com - Hourglass font.png"

Loads a image file named "damieng.com - Hourglass font.png" as a font.

background

Loads a .png file as a background image. If the image is not paletized with 16 colors, it will be automatically converted by the tool. Backgrounds will use palette #0.

Positional parameters:

  • fileName: a string pointing to the .png file to use.

Example:

* background "Blue Hedgehog.png"

Displays a image file named "Blue Hedgehog.png" into the background.

choice

Presents a menu to the user, allowing to choose between multiple options.

Example:

* choice
	# Play a music
		* music "Example.vgm"
	# Play a sound effect
		* sound "Example.vgm"

This displays a menu with two options "Play a music" and "Play a sound effect"; if the first one is selected, a music starts playing; if the second one is selected, a sound effect is played.

music

Starts playing a .vgm/.xgm music in the background.

Positional parameters:

  • fileName: a string pointing to the .vgm or .xgm file to use.

Example:

* music "Actraiser - Fillmore.vgm"

Starts playing a music file named "Actraiser - Fillmore.vgm".

sound

Plays a digitized sound.

Positional parameters:

  • fileName: a string pointing to the .wav file to use.

Example:

* sound "ready.wav"

Starts playing a sound file named "ready.wav".

stop

Stops the music and/or sound.

Flags:

  • music: tells it that it should stop the current music;
  • sound: tells it that it should stop the current sound effect.

Examples:

* stop music

Stops current music.

* stop sound

Stops current sound.

* stop music, sound

Stops both current music and current sound.

* stop

Also stops both current music and current sound.

image

Allows drawing a small image in .png format somewhere in the background. If the image is not paletized with 16 colors, it will be automatically converted by the tool. This command uses palette #2.

Positional parameters:

  • fileName: a string pointing to the .png file to use.

Named parameters:

  • at(x, y) if informed, will place the image at map position x, y on the target layer.

Flags:

  • foreground: tells that the image should be drawn on the foreground layer;
  • background: tells that the image should be drawn on the background layer.

Examples:

* image "Example.png", at(1, 2)

Draws the image "Example.png" at position 1, 2 of the background layer.

* image "Example.png", at(1, 2), foreground

Draws the image "Example.png" at position 1, 2 of the foreground layer.

* image "Example.png"

Draws the image "Example.png" background layer, at the same position used by the previous image command.

wait

Waits for a few seconds.

Positional parameters:

  • duration: tells how many seconds the command should wait.

Example:

* wait 3

Waits for 3 seconds.

create

Creates a global variable.

Positional parameters:

  • variable: the name of the variable to create;
  • initialValue: the initial value of the variable; the type of this value also determines the type of the variable.

Examples:

* create someVar, 12

Creates an integer variable named someVar, whose initial value is 12.

* create anotherOne, true

Creates a logical variable named anotherOne, whose initial value is true.

temp

Creates a local variable. temp variables are only visible inside the scene file that created them.

Positional parameters:

  • variable: the name of the variable to create;
  • initialValue: the initial value of the variable; the type of this value also determines the type of the variable.

Examples:

* temp someVar, 12

Creates an integer variable named someVar, whose initial value is 12.

* temp anotherOne, true

Creates a logical variable named anotherOne, whose initial value is true.

set

Changes the current value of an existing variable.

Positional parameters:

  • variable: name of the variable to update;
  • newValue: expression defining the new value of the variable.

Examples:

* set someThing, 2

Updates the value of the someThing variable to be 2.

* set anotherThing, anotherVar * 3

Updates the value of the anotherThing variable to be the value of the variable anotherVar multiplied by 3.

* set counter, counter + 2

Adds 2 to the value of the counter variable.

if/elseif/else

Allows a certain block of code to only be executed on a given condition.

Positional parameters for the if and elseif commands:

  • condition: a logical expression that will be used to determine if the corresponding block will be entered or not.

Example:

* if myVar = 2
	It is two.
* elseif myVar = 3
	It is three.
* else
	It is some other number.

If the variable myVar equals 2, it will say It is two. or else, if myVar equals 3, instead, it will say It is three.; otherwise, it will say It is some other number..

while

Keeps looping a block of code while a given condition is met.

Positional parameters:

  • condition: a logical expression that will be used to determine if the corresponding block will be entered or not.

Example:

* temp counter, 3
* while counter > 0
	Value is ${counter}
	* set counter, counter - 1

This will say Value is 3, then Value is 2, then Value is 1.

goto_scene

Jumps to a different scene. The scene files are located on the script directory, and have the .choice extension.

Positional parameters:

  • target: the name of the scene to jump to.

Example

* goto_scene test

Jumps to the scene contained in the archive test.choice.

window

Allows to configure the region of the screen that will be used for the text popups and menus.

Positional parameters:

  • from(x, y): the window will start at this coordinate, in characters;
  • to(x, y): the window will end at this coordinate, in characters;
  • size(w, h): the window will have this width and height, in characters.

Flags:

  • default: the window will be located at the default position, with the default size.

Examples:

* window from(1, 1), to(10, 4)

Tells that the window will start at position 1, 1 and end at position 10, 4, in characters.

* window from(29, 1), size(10, 6)

Tells that the window will start at position 29, 1 and have a width of 10 and a height of 6, in characters.

* window default

Tells that the window will be located at the default position, with the default size.

cursor

Allows to configure the blinking text cursor. It uses the palette #1.

Positional parameters:

  • fileName: name of the .png file containing the graphics of the cursor sprite;
  • width of the cursor sprite, in characters; the amount of frames will be the width of the image file divided by the width of the sprite, both in characters;
  • height: height of the cursor sprite, in characters;
  • frameDelay: the amount of video frames that the animation should wait before advance to the next cursor animation frame.

Example:

* cursor "Cursor sprite.png", 1, 1, 3

Loads the file "Cursor sprite.png" as a cursor, with a width of 1 character and a height of one character; it will wait 3 video frames betweeen one sprite frame and the next.

flush

Immediately shows the contents of the current text buffer on the text window; if passed the flag nowait, does not wait for a button press.

Flags:

  • nowait: if present, does not wait for a button press.

Examples:

* flush

Displays the text on the text window and waits for a button press.

* flush nowait

Displays the text on the text window without waiting for a button press.

clear

Allows to clear regions of the screen.

Flags:

  • background: if present, clears the background layer;
  • foreground: if present, clears the foreground layer;
  • window: if present, clears the text window.

Examples:

* clear background

Clears the background.

* clear foreground

Clears the foreground.

* clear window

Clears the text window.

* clear background, foreground

Clears both background and foreground.

* clear

Also clears both background and foreground.

title

Sets the title of the story. Used to populate the ROM headers.

Positional parameters:

  • name: The title of the story.

Example

* title "choice4genesis demo"

author

Sets the author of the story. Used to populate the ROM headers.

Positional parameters:

  • name: The author of the story.

Example

* author "John Doe"

import

Imports the given .h file into the generated code. Useful when combined with the native command.

Positional parameters:

  • fileName: The name of the .h file.

Example

* import "extra.h"

Will import "extra.h" into the generated C file.

native

Directly calls a C language function.

Positional parameters:

  • functionName: The name of the C function to call.

Variadic parameters:

All the positional parameters after functionName are passed as parameters to the function.

Named parameters:

  • into(variable) if informed, will update the given variable with the return of the callsed function.

Example

* native addExample, currentTick, 1 + 2, into(functionResult)

Will call the function addExample passing as parameters the value of the variable currentTick and the result of 1 + 2; the result of the function will be stored in the functionResult variable.

Planned commands

The tool accepts those commands, but, at the moment, they don't do anything.

label

Will allow to mark a place where the goto command can jump to.

goto

Will jump to a given label from anywhere on the same scene.

scene_list

Will configure the default sequence in which the scenes will be played.

finish

Will jump to the next scene in the game.

video

Will play a full screen video.