Skip to content

Helper functions/classes for livecoding free just intonation music in Sonic Pi.

License

Notifications You must be signed in to change notification settings

euwbah/xenchord-sonic-pi

Repository files navigation

xenchord

Helper methods/classes for livecoding just intonation music in Sonic Pi.

(work in progress)

How to use

Copy prelude_for_livecoding.rb into a buffer in Sonic Pi and run it first to load the 'library'.

Ensure the following global variables are configured propertly:

  • $LIB_ROOT should point to where xenchord-sonic-pi/lib/xenchord_sonic_pi is
  • $IP_ADDR is optional, and should point to the local ip to send OSC messages when notes are played.
  • $PRIME_LIMIT refers to the highest prime number to consider in calculations in JI ratios. Musical intervals should not exceed this prime limit.
  • $ISO_OCT_EQV_BOUNDS refers to the maximum number of octaves below and above to consider 'octave equivalent'.
  • $$F0_HZ refers to the fundamental frequency which the absolute interval 1/1 maps to.

These global variables should not be modified, but you can read their values if required:

  • $GLO refers to the Sonic Pi Runtime scope. Do not change this as the other files require this to work.
  • $PRIME_IDX_TABLE maps each prime number to its index in the $PRIMES list. Do not change.
  • $PRIMES is a list of prime numbers.

Development

 

VERY HACKY

⚠️ This is my personal, extremely scuffed, tooling setup for writing ruby & running Sonic Pi. A lot of this can be simplified once Shopify/ruby-lsp and Shofipy/vscode-ruby-lsp is fixed on Windows.

Track the PRs regarding the issues here:

 

To get a semantic highlighting & autocomplete suggestions, use ruby-lsp.


Overview of my livecoding/dev setup

This guide is written as a note-to-self in case I have to do this again in the future. Hopefully this is helpful for anyone else who also wants to do something similar.

  • OS: Windows 11
  • WSL2 OS: Ubuntu 22.04
  • Editor: VSCode
  • Sonic Pi: v4.4.0
  • Sonic Pi Client/Editor: euwbah/vscode-sonic-pi running on the same OS as whereever Sonic Pi server was started in.

Both ruby-lsp and ruby-lsp-vscode is currently broken on Windows. As a workaround, I use Remote-SSH to connect VSCode to a vscode-server running in WSL and install the ruby-lsp extension remotely.

On getting Ruby-LSP support in VSCode on Windows using Ubuntu WSL2. [WORKAROUND]

Written rather verbosely so hopefully someone without linux knowledge can follow along.

  • Install WSL2 from Microsoft store & Ubuntu 22 on WSL
    • Run Ubuntu & don't close it (It doesn't run in the background and will shut down if you close it)
  • Install OpenSSH server on Ubuntu WSL
    • sudo apt-get install openssh-server
  • Change WSL Ubuntu's SSH port to something other than the default 22 otherwise it will conflict with Windows' own SSH server which runs if developer mode is enabled.
    • sudo nano /etc/ssh/sshd_config: Open SSH server config file in nano editor.
    • Change #Port 22 to Port 2222 (or whatever port you want)
    • sudo service ssh restart
    • ⚠️ Remember this port. You will need to use this port when connecting to WSL Ubuntu from Windows.
  • Install "Remote - SSH" VSCode extension to run VSCode inside WSL & open a VSCode SSH session into WSL.
  • Setup Windows SSH configuration file to add Ubuntu WSL as a SSH host.
    • After installing "Remote - SSH" in VSCode, search for "Remote-SSH: Open Configuration File..." in the command palette.
    • Use the config file located in C:\Users\<username>\.ssh\config (or create it if it doesn't exist)
    • Inside it, write this:
      Host <name>
          HostName localhost
          Port <port>
          User <username>
      
      • Replace <name> with whatever you want to call the host (e.g. WSL_Ubuntu). Don't use spaces.
      • Replace <port> with the port you just set in the SSH server config file (e.g. 2222)
      • Replace <username> with your Ubuntu WSL username you configured (which may not be the same as your Windows username!)
  • 🟢 In order to not have to type Ubuntu password every connection:
    • On Windows, create an SSH keypair using openssl if you don't already have one. GitHub's guide on how to create/check for existing SSH keys
      • After generating, you should find a public key like ~/.ssh/id_ed25519.pub inside your user directory.
      • Open the .pub file with Notepad & copy the contents (that will be one of your device's public key)
    • Now in Ubuntu, paste public key into ~/.ssh/authorized_keys on a new line. Create the file if it doesn't already exist.
    • eval $(ssh-agent): Start ssh-agent
    • ssh-add: Add authorized keys'
    • sudo service ssh restart: Restart SSH server
  • Install homebrew in WSL Ubuntu (linuxbrew)
    • /bin/bash -c "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/HEAD/install.sh)"
    • Make sure to follow the 'Next steps:' instructions after the script runs.
      • It will ask you to sudo apt-get install build-essential gcc if you don't have those packages already, which you should do.
      • Ensure that ~/.profile contains the line eval "$(/home/linuxbrew/.linuxbrew/bin/brew shellenv)", otherwise the brew command & shell enviroment won't be available.
    • Run source ~/.profile to update changes on your current terminal session (or just re-login/restart Ubuntu)
  • Install ruby with brew on WSL Ubuntu
    • brew install ruby-install
    • Check command works: ruby-install -V
    • Install ruby: ruby-install ruby 3.2.2 (or whatever version Sonic Pi is using now)
  • Install chruby with brew on WSL Ubuntu
    • brew install chruby
    • ⚠️ NOTE: Because it is installed with brew, chruby will be located in /home/linuxbrew/.linuxbrew/opt/chruby/share/chruby, instead of /usr/local/share/chruby.
    • Add chruby to ~/.bashrc:
      • source /home/linuxbrew/.linuxbrew/opt/chruby/share/chruby/chruby.sh
      • To enable auto context switching based on a .ruby-version file in the current directory, also add: source /home/linuxbrew/.linuxbrew/opt/chruby/share/chruby/auto.sh
    • Run source ~/.bashrc to update changes (or open a new terminal session)
  • Clone this repository in Ubuntu and run bundle install to install ruby dependencies.
  • For the vscode-ruby-lsp extension to work:
    • cd /path/to/project.
      • ⚠️ The project's chruby environment must be activated so that the ruby-lsp install will be located at the right place.
    • gem install ruby-lsp.
      • With chruby active, this should install into ~/.gem/ruby/3.2.2/bin/ruby-lsp
      • Make sure you can run ruby-lsp from inside the project directory in the terminal without error.
  • For Solargraph VSCode extension to work:
    • cd ~: Exit project directory. Don't install the solargraph gem in the project's chruby 'sandbox' environment. VSCode uses the solargraph that is accessible from inside ~/.vscode-server/.
      • 🟠 This can be changed by modifying the solargraph.commandPath setting in VSCode, but you'd have to do it every project.
    • `gem install solargraph'
    • Inside Make sure you can run solargraph from inside ~/.vscode-server in the terminal without error.
      • which solargraph should give /usr/local/bin/solargraph.

On networking between Ubuntu/WSL2 and Windows host

🟢 Based on "Accessing network applications with WSL" - Learn/Windows/Development Environment/WSL/Concepts. Check link for more up-to-date info.

Sending data from windows to WSL2

Simply use localhost:<port> to access & point to networking apps running on WSL2. The ports are the same as whatever outgoing ports you use on WSL2.

Sending data from WSL2 to Windows

  • cat /etc/resolv.conf and look for nameserver <some ip address>
  • That's the IP address to use to connect from inside WSL2 to the Windows host outside.
  • Using localhost inside WSL2 will point towards WSL2 itself only.

On file permissions in WSL2

Sonic Pi requires read, write & execute permissions for all files in the installation directory (Program Files/Sonic Pi) and user data (~/.sonic-pi) to run.

Assuming knowledge of basic linux file permissions and how to view permissions of files/directories.

Then read these:

Giving Sonic Pi installation directory write perms in WSL2.

By default, the folders in Program Files do not have write access, which is a problem for Sonic Pi:

ruby.exe: Permission denied when starting Sonic Pi daemon.rb

Trying to chmod to give write permissions gives:

chmod permission denied without enabling automount metadata

Related: https://superuser.com/questions/1323645/unable-to-change-file-permissions-on-ubuntu-bash-for-windows-10

1. Allow WSL2 to store metadata on mounted Windows drives to support linux file perms.
  • sudo nano /etc/wsl.conf to modify the WSL config file (you'll need sudo)
  • Add/modify the following lines to include the metadata option under [automount]:
    [automount]
    options = "metadata"
    
    • This will allow WSL2 to add metadata to Windows files to support linux file perms.
    • 🟢 By default, umask is set to 022, fmask & dmask to 000. This should work.
    • Read more here
  • Save changes to /etc/wsl.conf
  • Shut down all linux instances in WSL:
    • In Windows powershell: wsl --shutdown
  • Check wsl --list --running and make sure no distributions are running.
  • Once all linux instances are stopped, wait at least 8 seconds
  • Restart Ubuntu.
2. Set "Full Control" permissions for Program Files\Sonic Pi
  • In Windows File Explorer, right click the Sonic Pi directory in Program Files and select Properties.
  • Go to the Security tab.
  • Edit permissions for the USERS group: set to Full Control.
  • Apply & Ok
  • Wait for new permissions to be recursively applied to all files in this directory (takes about 1 min)

On the Sonic Pi VSCode extension when running in remote SSH mode

VSCode Extensions like vscode-sonic-pi will be installed and run within the WSL2 virtual machine, not on the windows host. It appears that Sonic Pi currently doesnn't support executing the Server and GUI Client on two "separate" IPs. The Sonic Pi entry point, daemon.rb, starts OSC API servers that listens to localhost (127.0.0.1). Using WSL2 to start the Sonic Pi daemon will make the server listen to WSL2's IP, which cannot be accessed from the Windows host.

It is unclear whether the Scsynth/Sonic Pi daemon is actually being run on the Windows Host or WSL2 Hyper-V (it depends on what VSCode's Remote-SSH actually does).

On the bright side, it is possible to port-forward WSL2 to LAN. So an actual solution would be to run the entire setup in Ubuntu (installing Sonic Pi in Ubuntu, etc...). However, I don't trust WSL2's networking & audio to be stable enough for livecoding given this issue: Can't access UDP services running in WSL on localhost

The workaround workaround

  • Install Sonic Pi on Windows, use Sonic Pi's default editor to livecode
  • Clone this repo into Windows.
  • In Ubuntu, Create a symlink to the cloned repo.
  • Develop this 'library' in WSL2 to get proper tooling support.
  • run_file using the Windows path.

Notes to self

Referencing Sonic Pi's "global-scope context" inside classes requires using the $GLO prefix defined in prelude_for_livecoding.rb as Sonic Pi's global context is different from the scope which classes are defined in (which are actually default Ruby global scope).

The project repo is structured like a Gem for organization purposes & better support with extensions/linters/lsp/plugins, but it's not meant to ship as one.

Ruby dev on windows is cursed.

About

Helper functions/classes for livecoding free just intonation music in Sonic Pi.

Topics

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published