wledPixel

ESP8266 and MAX7219 dot matrix display management

The latest firmware version can be found in Releases

Supported key features:

1. Home Assistant client [display sensor values]
2. OpenWeatherMap client [display: temperature (C/F), humidity, pressure, wind speed, weather icon]
3. MQTT client [each display zone support own topic]
4. Wall NTP clock [NTP sync clock]
5. Manual input
6. Full controll through web UI
7. Home Assistant MQTT discovery [When MQTT settings specified, device will be automatically send discovery message to HA]
8. Initial setup through wifi AP and web UI
9. Controll through MQTT
10. Support 3 separated display zones
11. Support 12 display segments in the same time
12. Included 3 different fonts
13. Symbols font

Ingredients:

1. Dot matrix display MAX7219, something like this: https://aliexpress.ru/item/32618155357.html
2. WeMos D1 Mini (esp8266), something like this: https://aliexpress.ru/item/32651747570.html

Firmware compiled with next parameters:

// Display pinout
#define DATA_PIN  D7                     // WeMos D1 mini or ESP8266 -> GPIO13
#define CS_PIN    D6                     // WeMos D1 mini or ESP8266 -> GPIO12
#define CLK_PIN   D5                     // WeMos D1 mini or ESP8266 -> GPIO14

First boot:

• Device will boot in wifi access point mode and write the wifi name and password on the display.
• AP wifi name: wledPixel-[short MAC address]
• AP wifi password: 12345678
• Connect to this AP and configure your wifi settings (connect to your wifi network)
• When the device connects to the WIFI network, the device's IP address will be displayed on the zone0
• Open the browser and go to the device IP address

Icons in Wled symbol font:

1 - "X"
2 - "stop"
3 - "rain"
4 - "ip:"
8 - "full light segment"
A - "calendar"
B - "windows"
C - "clouds"
D - "door"
E - "female"
F - "snowflake"
G - "key"
H - "male"
I - "alarm"
J - "clock"
K - "garbage"
L - "info"
M - "moon"
N - "message"
O - "reminder"
P - "wifi"
R - "huge rain"
S - "sun"
T - "thunderstorm"
c - "cloud"
f - "fog"
m - "cloud and moon"
r - "rain"
s - "sun and cloud"
° - "degree symbol"

MQTT topics:

• devicePrefix/zoneN/workMode - zone work mode
• devicePrefix/zoneN/scrolleffectIn - scroll effect IN
• devicePrefix/zoneN/scrolleffectOut - scroll effect Out
• devicePrefix/zoneN/scrollspeed - scroll speed
• devicePrefix/zoneN/scrollpause - scroll pause
• devicePrefix/zoneN/scrollalign - scroll alignment
• devicePrefix/zoneN/charspacing - character spacing
• devicePrefix/intensity - brightness
• devicePrefix/zoneN/workMode - zone work mode
• devicePrefix/power - display power control, support on / off values

where devicePrefix = wledPixel-A071 zoneN = zone number (e.g. Zone0)

Supported workMode:

workMode supported values:

• mqttClient - MQTT client
• manualInput - Manual static text inputed in UI
• wallClock - NTP sync clock
• owmWeather - Open Weather Map client
• haClient - Home Assistant client

Wall clock

Wall clock mode support next following display options:

• HH:MM - Hours : Minutes [21:43]
• HH:MM:SS - Hours : Minutes : Seconds [21:43:54]
• HH - Hours [21]
• MM - Minutes [43]
• dd.mm.yyyy - Day.Month.Year [21.06.2022]
• dd.mm - Day.Month [21.06]
• dd.mm aa - Day.Month weekday name (e.g., Sun) [21.06 Tue] *in Cyrillic font weekday name will be in Cyrillic
• aa - Weekday name (e.g. Sun) *in Cyrillic font weekday name will be in Cyrillic

Scroll effect list

Default effects:

• PA_RANDOM
• PA_PRINT
• PA_SCAN_HORIZ
• PA_SCROLL_LEFT
• PA_WIPE
• PA_SCAN_VERTX
• PA_SCROLL_UP_LEFT
• PA_SCROLL_UP
• PA_FADE
• PA_OPENING_CURSOR
• PA_GROW_UP
• PA_SCROLL_UP_RIGHT
• PA_BLINDS
• PA_CLOSING
• PA_GROW_DOWN
• PA_SCAN_VERT
• PA_SCROLL_DOWN_LEFT
• PA_WIPE_CURSOR
• PA_SCAN_HORIZX
• PA_DISSOLVE
• PA_MESH
• PA_OPENING
• PA_CLOSING_CURSOR
• PA_SCROLL_DOWN_RIGHT
• PA_SCROLL_RIGHT
• PA_SLICE
• PA_SCROLL_DOWN

Home Assistant automation example:

Send sensor value each time when a value has been changed

---
- alias: Outside temp change - send new temp to wled panel mqtt
  initial_state: 'on'
  trigger:
    platform: state
    entity_id: sensor.outside_thp_sensor_3
  action:
    - service: mqtt.publish
      data:
        topic: wledPixel-A071/zone0_text
        payload_template: "{{ states('sensor.outside_thp_sensor_3') }} C"

Change wledPixel-A071 to device name with your prefix