0.31.0

Breaking changes

Note: [email protected] can be used with [email protected] or higher. The same applies to Drizzle Kit. If you run a Drizzle Kit command, it will check and prompt you for an upgrade (if needed). You can check for Drizzle Kit updates. below

PostgreSQL indexes API was changed

The previous Drizzle+PostgreSQL indexes API was incorrect and was not aligned with the PostgreSQL documentation. The good thing is that it was not used in queries, and drizzle-kit didn't support all properties for indexes. This means we can now change the API to the correct one and provide full support for it in drizzle-kit

Previous API

• No way to define SQL expressions inside .on.
• .using and .on in our case are the same thing, so the API is incorrect here.
• .asc(), .desc(), .nullsFirst(), and .nullsLast() should be specified for each column or expression on indexes, but not on an index itself.

// Index declaration reference
index('name')
  .on(table.column1, table.column2, ...) or .onOnly(table.column1, table.column2, ...)
  .concurrently()
  .using(sql``) // sql expression
  .asc() or .desc()
  .nullsFirst() or .nullsLast()
  .where(sql``) // sql expression

Current API

// First example, with `.on()`
index('name')
  .on(table.column1.asc(), table.column2.nullsFirst(), ...) or .onOnly(table.column1.desc().nullsLast(), table.column2, ...)
  .concurrently()
  .where(sql``)
  .with({ fillfactor: '70' })

// Second Example, with `.using()`
index('name')
  .using('btree', table.column1.asc(), sql`lower(${table.column2})`, table.column1.op('text_ops'))
  .where(sql``) // sql expression
  .with({ fillfactor: '70' })

New Features

🎉 "pg_vector" extension support

There is no specific code to create an extension inside the Drizzle schema. We assume that if you are using vector types, indexes, and queries, you have a PostgreSQL database with the pg_vector extension installed.

You can now specify indexes for pg_vector and utilize pg_vector functions for querying, ordering, etc.

Let's take a few examples of pg_vector indexes from the pg_vector docs and translate them to Drizzle

L2 distance, Inner product and Cosine distance

// CREATE INDEX ON items USING hnsw (embedding vector_l2_ops);
// CREATE INDEX ON items USING hnsw (embedding vector_ip_ops);
// CREATE INDEX ON items USING hnsw (embedding vector_cosine_ops);

const table = pgTable('items', {
    embedding: vector('embedding', { dimensions: 3 })
}, (table) => ({
    l2: index('l2_index').using('hnsw', table.embedding.op('vector_l2_ops'))
    ip: index('ip_index').using('hnsw', table.embedding.op('vector_ip_ops'))
    cosine: index('cosine_index').using('hnsw', table.embedding.op('vector_cosine_ops'))
}))

L1 distance, Hamming distance and Jaccard distance - added in pg_vector 0.7.0 version

// CREATE INDEX ON items USING hnsw (embedding vector_l1_ops);
// CREATE INDEX ON items USING hnsw (embedding bit_hamming_ops);
// CREATE INDEX ON items USING hnsw (embedding bit_jaccard_ops);

const table = pgTable('table', {
    embedding: vector('embedding', { dimensions: 3 })
}, (table) => ({
    l1: index('l1_index').using('hnsw', table.embedding.op('vector_l1_ops'))
    hamming: index('hamming_index').using('hnsw', table.embedding.op('bit_hamming_ops'))
    bit: index('bit_jaccard_index').using('hnsw', table.embedding.op('bit_jaccard_ops'))
}))

For queries, you can use predefined functions for vectors or create custom ones using the SQL template operator.

You can also use the following helpers:

import { l2Distance, l1Distance, innerProduct, 
          cosineDistance, hammingDistance, jaccardDistance } from 'drizzle-orm'

l2Distance(table.column, [3, 1, 2]) // table.column <-> '[3, 1, 2]'
l1Distance(table.column, [3, 1, 2]) // table.column <+> '[3, 1, 2]'

innerProduct(table.column, [3, 1, 2]) // table.column <#> '[3, 1, 2]'
cosineDistance(table.column, [3, 1, 2]) // table.column <=> '[3, 1, 2]'

hammingDistance(table.column, '101') // table.column <~> '101'
jaccardDistance(table.column, '101') // table.column <%> '101'

If pg_vector has some other functions to use, you can replicate implimentation from existing one we have. Here is how it can be done

export function l2Distance(
  column: SQLWrapper | AnyColumn,
  value: number[] | string[] | TypedQueryBuilder<any> | string,
): SQL {
  if (is(value, TypedQueryBuilder<any>) || typeof value === 'string') {
    return sql`${column} <-> ${value}`;
  }
  return sql`${column} <-> ${JSON.stringify(value)}`;
}

Name it as you wish and change the operator. This example allows for a numbers array, strings array, string, or even a select query. Feel free to create any other type you want or even contribute and submit a PR

Examples

Let's take a few examples of pg_vector queries from the pg_vector docs and translate them to Drizzle

import { l2Distance } from 'drizzle-orm';

// SELECT * FROM items ORDER BY embedding <-> '[3,1,2]' LIMIT 5;
db.select().from(items).orderBy(l2Distance(items.embedding, [3,1,2]))

// SELECT embedding <-> '[3,1,2]' AS distance FROM items;
db.select({ distance: l2Distance(items.embedding, [3,1,2]) })

// SELECT * FROM items ORDER BY embedding <-> (SELECT embedding FROM items WHERE id = 1) LIMIT 5;
const subquery = db.select({ embedding: items.embedding }).from(items).where(eq(items.id, 1));
db.select().from(items).orderBy(l2Distance(items.embedding, subquery)).limit(5)

// SELECT (embedding <#> '[3,1,2]') * -1 AS inner_product FROM items;
db.select({ innerProduct: sql`(${maxInnerProduct(items.embedding, [3,1,2])}) * -1` }).from(items)

// and more!

🎉 New PostgreSQL types: point, line

You can now use point and line from PostgreSQL Geometric Types

Type point has 2 modes for mappings from the database: tuple and xy.

• tuple will be accepted for insert and mapped on select to a tuple. So, the database Point(1,2) will be typed as [1,2] with drizzle.

• xy will be accepted for insert and mapped on select to an object with x, y coordinates. So, the database Point(1,2) will be typed as { x: 1, y: 2 } with drizzle

const items = pgTable('items', {
 point: point('point'),
 pointObj: point('point_xy', { mode: 'xy' }),
});

Type line has 2 modes for mappings from the database: tuple and abc.

• tuple will be accepted for insert and mapped on select to a tuple. So, the database Line{1,2,3} will be typed as [1,2,3] with drizzle.

• abc will be accepted for insert and mapped on select to an object with a, b, and c constants from the equation Ax + By + C = 0. So, the database Line{1,2,3} will be typed as { a: 1, b: 2, c: 3 } with drizzle.

const items = pgTable('items', {
 line: line('line'),
 lineObj: point('line_abc', { mode: 'abc' }),
});

🎉 Basic "postgis" extension support

There is no specific code to create an extension inside the Drizzle schema. We assume that if you are using postgis types, indexes, and queries, you have a PostgreSQL database with the postgis extension installed.

geometry type from postgis extension:

const items = pgTable('items', {
  geo: geometry('geo', { type: 'point' }),
  geoObj: geometry('geo_obj', { type: 'point', mode: 'xy' }),
  geoSrid: geometry('geo_options', { type: 'point', mode: 'xy', srid: 4000 }),
});

mode
Type geometry has 2 modes for mappings from the database: tuple and xy.

• tuple will be accepted for insert and mapped on select to a tuple. So, the database geometry will be typed as [1,2] with drizzle.
• xy will be accepted for insert and mapped on select to an object with x, y coordinates. So, the database geometry will be typed as { x: 1, y: 2 } with drizzle

type

The current release has a predefined type: point, which is the geometry(Point) type in the PostgreSQL PostGIS extension. You can specify any string there if you want to use some other type

Drizzle Kit updates: [email protected]

Release notes here are partially duplicated from [email protected]

New Features

🎉 Support for new types

Drizzle Kit can now handle:

• point and line from PostgreSQL
• vector from the PostgreSQL pg_vector extension
• geometry from the PostgreSQL PostGIS extension

🎉 New param in drizzle.config - extensionsFilters

The PostGIS extension creates a few internal tables in the public schema. This means that if you have a database with the PostGIS extension and use push or introspect, all those tables will be included in diff operations. In this case, you would need to specify tablesFilter, find all tables created by the extension, and list them in this parameter.

We have addressed this issue so that you won't need to take all these steps. Simply specify extensionsFilters with the name of the extension used, and Drizzle will skip all the necessary tables.

Currently, we only support the postgis option, but we plan to add more extensions if they create tables in the public schema.

The postgis option will skip the geography_columns, geometry_columns, and spatial_ref_sys tables

import { defineConfig } from 'drizzle-kit'

export default defaultConfig({
  dialect: "postgresql",
  extensionsFilters: ["postgis"],
})

Improvements

Update zod schemas for database credentials and write tests to all the positive/negative cases

• support full set of SSL params in kit config, provide types from node:tls connection

import { defineConfig } from 'drizzle-kit'

export ...

v0.31.0-beta

Breaking changes

PostgreSQL indexes API was changed

The previous Drizzle+PostgreSQL indexes API was incorrect and was not aligned with the PostgreSQL documentation. The good thing is that it was not used in queries, and drizzle-kit didn't support all properties for indexes. This means we can now change the API to the correct one and provide full support for it in drizzle-kit

Previous API

• No way to define SQL expressions inside .on.
• .using and .on in our case are the same thing, so the API is incorrect here.
• .asc(), .desc(), .nullsFirst(), and .nullsLast() should be specified for each column or expression on indexes, but not on an index itself.

// Index declaration reference
index('name')
  .on(table.column1, table.column2, ...) or .onOnly(table.column1, table.column2, ...)
  .concurrently()
  .using(sql``) // sql expression
  .asc() or .desc()
  .nullsFirst() or .nullsLast()
  .where(sql``) // sql expression

Current API

// First example, with `.on()`
index('name')
  .on(table.column1.asc(), table.column2.nullsFirst(), ...) or .onOnly(table.column1.desc().nullsLast(), table.column2, ...)
  .concurrently()
  .where(sql``)
  .with({ fillfactor: '70' })

// Second Example, with `.using()`
index('name')
  .using('btree', table.column1.asc(), sql`lower(${table.column2})`, table.column1.op('text_ops'))
  .where(sql``) // sql expression
  .with({ fillfactor: '70' })

New Features

🎉 "pg_vector" extension support

There is no specific code to create an extension inside the Drizzle schema. We assume that if you are using vector types, indexes, and queries, you have a PostgreSQL database with the pg_vector extension installed.

You can now specify indexes for pg_vector and utilize pg_vector functions for querying, ordering, etc.

Let's take a few examples of pg_vector indexes from the pg_vector docs and translate them to Drizzle

L2 distance, Inner product and Cosine distance

// CREATE INDEX ON items USING hnsw (embedding vector_l2_ops);
// CREATE INDEX ON items USING hnsw (embedding vector_ip_ops);
// CREATE INDEX ON items USING hnsw (embedding vector_cosine_ops);

const table = pgTable('items', {
    embedding: vector('embedding', { dimensions: 3 })
}, (table) => ({
    l2: index('l2_index').using('hnsw', table.embedding.op('vector_l2_ops'))
    ip: index('ip_index').using('hnsw', table.embedding.op('vector_ip_ops'))
    cosine: index('cosine_index').using('hnsw', table.embedding.op('vector_cosine_ops'))
}))

L1 distance, Hamming distance and Jaccard distance - added in pg_vector 0.7.0 version

// CREATE INDEX ON items USING hnsw (embedding vector_l1_ops);
// CREATE INDEX ON items USING hnsw (embedding bit_hamming_ops);
// CREATE INDEX ON items USING hnsw (embedding bit_jaccard_ops);

const table = pgTable('table', {
    embedding: vector('embedding', { dimensions: 3 })
}, (table) => ({
    l1: index('l1_index').using('hnsw', table.embedding.op('vector_l1_ops'))
    hamming: index('hamming_index').using('hnsw', table.embedding.op('bit_hamming_ops'))
    bit: index('bit_jaccard_index').using('hnsw', table.embedding.op('bit_jaccard_ops'))
}))

For queries, you can use predefined functions for vectors or create custom ones using the SQL template operator.

You can also use the following helpers:

import { l2Distance, l1Distance, innerProduct, 
          cosineDistance, hammingDistance, jaccardDistance } from 'drizzle-orm'

l2Distance(table.column, [3, 1, 2]) // table.column <-> '[3, 1, 2]'
l1Distance(table.column, [3, 1, 2]) // table.column <+> '[3, 1, 2]'

innerProduct(table.column, [3, 1, 2]) // table.column <#> '[3, 1, 2]'
cosineDistance(table.column, [3, 1, 2]) // table.column <=> '[3, 1, 2]'

hammingDistance(table.column, '101') // table.column <~> '101'
jaccardDistance(table.column, '101') // table.column <%> '101'

If pg_vector has some other functions to use, you can replicate implimentation from existing one we have. Here is how it can be done

export function l2Distance(
  column: SQLWrapper | AnyColumn,
  value: number[] | string[] | TypedQueryBuilder<any> | string,
): SQL {
  if (is(value, TypedQueryBuilder<any>) || typeof value === 'string') {
    return sql`${column} <-> ${value}`;
  }
  return sql`${column} <-> ${JSON.stringify(value)}`;
}

Name it as you wish and change the operator. This example allows for a numbers array, strings array, string, or even a select query. Feel free to create any other type you want or even contribute and submit a PR

Examples

Let's take a few examples of pg_vector queries from the pg_vector docs and translate them to Drizzle

import { l2Distance } from 'drizzle-orm';

// SELECT * FROM items ORDER BY embedding <-> '[3,1,2]' LIMIT 5;
db.select().from(items).orderBy(l2Distance(items.embedding, [3,1,2]))

// SELECT embedding <-> '[3,1,2]' AS distance FROM items;
db.select({ distance: l2Distance(items.embedding, [3,1,2]) })

// SELECT * FROM items ORDER BY embedding <-> (SELECT embedding FROM items WHERE id = 1) LIMIT 5;
const subquery = db.select({ embedding: items.embedding }).from(items).where(eq(items.id, 1));
db.select().from(items).orderBy(l2Distance(items.embedding, subquery)).limit(5)

// SELECT (embedding <#> '[3,1,2]') * -1 AS inner_product FROM items;
db.select({ innerProduct: sql`(${maxInnerProduct(items.embedding, [3,1,2])}) * -1` }).from(items)

// and more!

0.30.10

New Features

🎉 .if() function added to all WHERE expressions

Select all users after cursors if a cursor value was provided

async function someFunction(categories: string[] = [], views = 0) {
  await db
    .select()
    .from(users)
    .where(
       and(
          gt(posts.views, views).if(views > 100),
          inArray(posts.category, categories).if(categories.length > 0),
       ),
    );
}

Bug Fixes

• Fixed internal mappings for sessions .all, .values, .execute functions in AWS DataAPI

0.30.9

• 🐛 Fixed migrator in AWS Data API
• Added setWhere and targetWhere fields to .onConflictDoUpdate() config in SQLite instead of single where field
• 🛠️ Added schema information to Drizzle instances via db._.fullSchema

0.30.8

• 🎉 Added custom schema support to enums in Postgres (fixes #669 via #2048):

⚠️ Only available in drizzle-orm for now, drizzle-kit support will arrive soon

import { pgSchema } from 'drizzle-orm/pg-core';

const mySchema = pgSchema('mySchema');
const colors = mySchema.enum('colors', ['red', 'green', 'blue']);

• 🎉 Changed D1 migrate() function to use batch API (#2137)
• 🐛 Split where clause in Postgres .onConflictDoUpdate method into setWhere and targetWhere clauses, to support both where cases in on conflict ... clause (fixes #1628, #1302 via #2056)
• 🐛 Fixed query generation for where clause in Postgres .onConflictDoNothing method, as it was placed in a wrong spot (fixes #1628 via #2056)
• 🐛 Fixed multiple issues with AWS Data API driver (fixes #1931, #1932, #1934, #1936 via #2119)
• 🐛 Fix inserting and updating array values in AWS Data API (fixes #1912 via #1911)

Thanks @hugo082 and @livingforjesus!

0.30.7

Bug fixes

• Add mappings for @vercel/postgres package
• Fix interval mapping for neon drivers - #1542

0.30.6

New Features

🎉 PGlite driver Support

PGlite is a WASM Postgres build packaged into a TypeScript client library that enables you to run Postgres in the browser, Node.js and Bun, with no need to install any other dependencies. It is only 2.6mb gzipped.

It can be used as an ephemeral in-memory database, or with persistence either to the file system (Node/Bun) or indexedDB (Browser).

Unlike previous "Postgres in the browser" projects, PGlite does not use a Linux virtual machine - it is simply Postgres in WASM.

Usage Example

import { PGlite } from '@electric-sql/pglite';
import { drizzle } from 'drizzle-orm/pglite';

// In-memory Postgres
const client = new PGlite();
const db = drizzle(client);

await db.select().from(users);

---

There are currently 2 limitations, that should be fixed on Pglite side:

• Attempting to refresh a materialised view throws error

• Attempting to SET TIME ZONE throws error

0.30.5

New Features

🎉 $onUpdate functionality for PostgreSQL, MySQL and SQLite

Adds a dynamic update value to the column.
The function will be called when the row is updated, and the returned value will be used as the column value if none is provided.
If no default (or $defaultFn) value is provided, the function will be called when the row is inserted as well, and the returned value will be used as the column value.

Note: This value does not affect the drizzle-kit behavior, it is only used at runtime in drizzle-orm.

const usersOnUpdate = pgTable('users_on_update', {
  id: serial('id').primaryKey(),
  name: text('name').notNull(),
  updateCounter: integer('update_counter').default(sql`1`).$onUpdateFn(() => sql`update_counter + 1`),
  updatedAt: timestamp('updated_at', { mode: 'date', precision: 3 }).$onUpdate(() => new Date()),
  alwaysNull: text('always_null').$type<string | null>().$onUpdate(() => null),
});

Fixes

• [BUG]: insertions on columns with the smallserial datatype are not optional - #1848

Thanks @Angelelz and @gabrielDonnantuoni!

0.30.4

New Features

🎉 xata-http driver support

According their official website, Xata is a Postgres data platform with a focus on reliability, scalability, and developer experience. The Xata Postgres service is currently in beta, please see the Xata docs on how to enable it in your account.

Drizzle ORM natively supports both the xata driver with drizzle-orm/xata package and the postgres or pg drivers for accessing a Xata Postgres database.

The following example use the Xata generated client, which you obtain by running the xata init CLI command.

pnpm add drizzle-orm @xata.io/client

import { drizzle } from 'drizzle-orm/xata-http';
import { getXataClient } from './xata'; // Generated client

const xata = getXataClient();
const db = drizzle(xata);

const result = await db.select().from(...);

You can also connect to Xata using pg or postgres.js drivers

0.30.3

• 🎉 Added raw query support (db.execute(...)) to batch API in Neon HTTP driver
• 🐛 Fixed @neondatabase/serverless HTTP driver types issue (#1945, neondatabase/serverless#66)
• 🐛 Fixed sqlite-proxy driver .run() result (#2038)