Skip to content

Python script to load firmware using STM32 bootloader

Notifications You must be signed in to change notification settings

domenpk/stm32loader

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

11 Commits
 
 
 
 
 
 

Repository files navigation

STM32Loader
===========

Python script which will talk to the STM32 bootloader to upload and download firmware.

Original Version by: Ivan A-R <[email protected]>


Usage: ./stm32loader.py [-hqVewvr] [-l length] [-p port] [-b baud] [-a addr] [file.bin]
    -h          This help
    -q          Quiet
    -V          Verbose
    -e          Erase
    -w          Write
    -v          Verify
    -r          Read
    -l length   Length of read
    -p port     Serial port (default: /dev/tty.usbserial-ftCYPMYJ)
    -b baud     Baud speed (default: 115200)
    -a addr     Target address

    ./stm32loader.py -e -w -v example/main.bin


Example:
stm32loader.py -e -w -v somefile.bin

This will pre-erase flash, write somefile.bin to the flash on the device, and then perform a verification after writing is finished.

About

Python script to load firmware using STM32 bootloader

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Python 100.0%