v6.6.49

• Update kernel to 6.6.49
• Enable CONFIG_SND_USB

v6.6.41

• Update kernel to 6.6.41
• Add support for X96 Mini W2 (S905W2 version)
• Lowered SD-card speed for S905W2 in the hope it will work with more cards
• Small fix for aml-multiboot-setup.sh

v6.6.34

• Update kernel to 6.6.34
• Add the missing -slow DTB variant for some S905W2 boxes
• Add support for Tanix TX3 Mini+ (S905W2 version, same as Tanix W2)
• Add firmware for BCM4334 WiFI modules

v6.6.29

• Update kernel to 6.6.29

• Add slow mmc box variants for s905w2_generic and H96 Max W2

• Lower MMC frequencies for T95W2. WIFI does now work

• Add simple-framebuffer support for Vontar X2 (thanks @Adney) 100M (S905W2)

• Disable CONFIG_CFG80211_DEFAULT_PS power save for WIFI to prevent problems with some WIFI adapters, especially qca6174

• Upgrade Ubuntu to Noble Numbat (v24.04 LTS)

v6.6.23

• Update kernel to 6.6.23
• Add support for Tanix TX3 100M ethernet version (S905X3)
• Add initial support for T95 W2 (S905Y4 version EXPERIMENTAL SOC, no WIFI and only HDMI console support)
• Add generic S905Y4 box config
• Lowered max-frequency for G12A (S905X2) eMMC to fix write IO errors
• Enable KVM kernel configs
• Enabled CONFIG_BINFMT_MISC kernel config

v6.6.16

• Update kernel to 6.6.16

• Add support for X96 Max (S905X2 1000M)

• Add support for H96Max W2 (S905W2 EXPERIMENTAL SOC, no WIFI and only HDMI console support)

• Add script to read Amlogic partition tabel type (needed for eMMC install script)

• Some modifications for the experimental, not supported, eMMC install script, to be more reliable.

v6.6.8

• Update kernel to 6.6.8

• fixed bug in GXL DTB that apparently hangs some GXL boxes

• Make boot scripts more compatible with bootscripts from other distributions like Coreelec, Libreelec, Armbian, mainline u-boot scripts

• Let boot scripts guess root partition, so configuration should not be necessary anymore

• Cleanup some old parts in box configs for kernel 5.10

• Added experimental, not supported eMMC install script. Should also work for older S905X4 and S905W2 boxes.

Added new box configs:

• Vontar X4 gigabit
• X96 Max plus 2101W (JL2101 gigabit PHY, no wifi/bt)

v6.6.1

• Update kernel to 6.6.1 (most probably the new LTS version)

• HDMI Sound for S905X2 is fixed

• minor fixes and cleanups in boot files

v6.1.57

• Update kernel to 6.1.57 LTS

• Few additional kernel config changes for a bit more security hardened kernel

• Fix a bug that prevented booting S905W2 generic. Warning, S905W2 still is very experimental.

• Fix a bug that disabled framebuffer display for S905W2

• Update to Ubuntu 23.10 (Mantic Minotaur)

v6.1.47

• Update kernel to 6.1.47 LTS
• Add support for H96 Pro+ (S912 box with gigabit ethernet)
• Some kernel config changes for a bit more security hardened kernel
• Fixed two bugs that prevented booting TanixW2 (S905W2)