-
Notifications
You must be signed in to change notification settings - Fork 430
Commit
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
- Loading branch information
Showing
1 changed file
with
114 additions
and
12 deletions.
There are no files selected for viewing
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Original file line number | Diff line number | Diff line change |
---|---|---|
@@ -1,18 +1,120 @@ | ||
[machine] | ||
[profile] | ||
machine_name = Zone3D Printer | ||
machine_type = Zone3D Printer | ||
machine_width = 240 | ||
machine_depth = 220 | ||
machine_height = 210 | ||
machine_center_is_zero = False | ||
has_heated_bed = True | ||
gcode_flavor = RepRap (Marlin/Sprinter) | ||
extruder_amount = 1 | ||
|
||
[profile] | ||
filament_diameter = 1.75 | ||
layer_height = 0.2 | ||
wall_thickness = 1.0 | ||
retraction_enable = True | ||
solid_layer_thickness = 0.2 | ||
fill_density = 15 | ||
nozzle_size = 0.4 | ||
layer_height = 0.14 | ||
print_speed = 50 | ||
print_speed = 40 | ||
print_temperature = 260 | ||
print_temperature2 = 0 | ||
print_temperature3 = 0 | ||
print_temperature4 = 0 | ||
print_temperature5 = 0 | ||
print_bed_temperature = 100 | ||
support = Touching buildplate | ||
platform_adhesion = None | ||
support_dual_extrusion = Both | ||
wipe_tower = False | ||
wipe_tower_volume = 15 | ||
ooze_shield = False | ||
filament_diameter = 1.75 | ||
filament_diameter2 = 0 | ||
filament_diameter3 = 0 | ||
filament_diameter4 = 0 | ||
filament_diameter5 = 0 | ||
filament_flow = 100.0 | ||
retraction_speed = 20.0 | ||
retraction_amount = 0.6 | ||
retraction_dual_amount = 16.5 | ||
retraction_min_travel = 1.5 | ||
retraction_combing = True | ||
retraction_minimal_extrusion = 0.02 | ||
retraction_hop = 0.0 | ||
bottom_thickness = 0.3 | ||
layer0_width_factor = 100 | ||
object_sink = 0.0 | ||
overlap_dual = 0.15 | ||
travel_speed = 150 | ||
bottom_layer_speed = 20 | ||
infill_speed = 0.0 | ||
solidarea_speed = 0.0 | ||
inset0_speed = 20 | ||
insetx_speed = 70 | ||
cool_min_layer_time = 5 | ||
fan_enabled = True | ||
skirt_line_count = 1 | ||
skirt_gap = 3.0 | ||
skirt_minimal_length = 150.0 | ||
fan_full_height = 0.5 | ||
fan_speed = 100 | ||
fan_speed_max = 100 | ||
cool_min_feedrate = 10 | ||
cool_head_lift = False | ||
solid_top = True | ||
solid_bottom = True | ||
fill_overlap = 15 | ||
support_type = Lines | ||
support_angle = 45 | ||
support_fill_rate = 15 | ||
support_xy_distance = 0.7 | ||
support_z_distance = 0.17 | ||
spiralize = False | ||
simple_mode = False | ||
brim_line_count = 20 | ||
raft_margin = 5.0 | ||
raft_line_spacing = 3.0 | ||
raft_base_thickness = 0.3 | ||
raft_base_linewidth = 1.0 | ||
raft_interface_thickness = 0.27 | ||
raft_interface_linewidth = 0.4 | ||
raft_airgap_all = 0.0 | ||
raft_airgap = 0.22 | ||
raft_surface_layers = 2 | ||
raft_surface_thickness = 0.27 | ||
raft_surface_linewidth = 0.4 | ||
fix_horrible_union_all_type_a = True | ||
fix_horrible_union_all_type_b = False | ||
fix_horrible_use_open_bits = False | ||
fix_horrible_extensive_stitching = False | ||
plugin_config = (lp1 | ||
. | ||
object_center_x = -1 | ||
object_center_y = -1 | ||
|
||
[alterations] | ||
start.gcode = ;Sliced at: {day} {date} {time} | ||
;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} | ||
;Print time: {print_time} | ||
;Filament used: {filament_amount}m {filament_weight}g | ||
;Filament cost: {filament_cost} | ||
;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line | ||
;M109 S{print_temperature} ;Uncomment to add your own temperature line | ||
M107 | ||
G21 ;metric values | ||
G90 ;absolute positioning | ||
M82 ;set extruder to absolute mode | ||
M107 ;start with the fan off | ||
G28 X0 Y0 ;move X/Y to min endstops | ||
G28 Z0 ;move Z to min endstops | ||
G1 Z15.0 F{travel_speed} ;move the platform down 15mm | ||
G92 E0 ;zero the extruded length | ||
G1 F200 E10 ;extrude 10mm of feed stock | ||
G92 E0 ;zero the extruded length again | ||
G1 F{travel_speed} | ||
;Put printing message on LCD screen | ||
M117 Printing... | ||
end.gcode = ;End GCode | ||
M104 S0 ;extruder heater off | ||
M140 S0 ;heated bed heater off (if you have it) | ||
G91 ;relative positioning | ||
G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure | ||
G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more | ||
G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way | ||
M84 ;steppers off | ||
G90 ;absolute positioning | ||
;{profile_string} | ||
|