This is a Composer project template for developing Drupal core.
It allows the following:
- A clean git clone of Drupal core.
- Composer dependencies of Drupal core are installed, so Drupal can be installed and run as normal.
- Other Composer packages you might want, such as Drush, Devel module, Admin Toolbar module, and Devel Accessibility can be installed too, but don't affect the composer files that are part of Drupal core.
- Contrib modules can be installed with Composer (normally Composer would refuse to install them because their info.yml file does not declare compatibility with core 11.x).
- Other packages, including contrib modules, can be installed as git clones to develop them in tandem with Drupal core.
Get this into Drupal core! See https://www.drupal.org/project/drupal/issues/1792310.
Get this into Drupal core! See https://www.drupal.org/project/drupal/issues/1792310.
To install a Drupal project for working on Drupal core:
composer create-project joachim-n/drupal-core-development-project
Composer will clone Drupal core into a 'repos/drupal' directory within the project, and then symlink that into the project when it installs Drupal core.
Drupal core is checked out to its default branch, which is currently 11.x. To
start on a different branch without first checking out 11.x, you can use the
--no-install option with the composer create-project command, then change
the branch of the Drupal core clone, then do composer install.
Once the Composer installation is complete, you can install Drupal as normal,
either with drush si or with the web UI.
First, make sure your DDEV version is at least 1.23.0. Next, create a new folder
for your project and cd into it. Then:
$ ddev config --project-type=drupal --php-version=8.3
$ ddev start
$ ddev composer create joachim-n/drupal-core-development-project
$ ddev config --update
$ ddev restart
To use the justafish/ddev-drupal-core-dev DDEV addon, you need to make the following changes to the installation instructions for that addon:
- For
ddev config, specify --project-type=drupal - Do
composer installbefore doingddev get justafish/ddev-drupal-core-dev - Do
ln -s web/autoload.php .so the addon'sddev drupalcommand find the autoloader. (There is a merge request to remove the need for this: justafish/ddev-drupal-core-dev#35) - DO NOT do
drupal install. Instead, doddev drush si --db-url=sqlite://sites/default/files/.ht.sqlite?module=sqlite -y(You might need to manually create web/sites/default/files first) Thedrupal installcommand does not work when the drupal package is symlinked in by Composer.
To run PHPUnit tests, you will need to tweak the DDEV phpunit command until justafish/ddev-drupal-core-dev#37 is fixed.
You can install any Composer package as you would with a normal project. This will not affect Drupal core.
To work with Composer, you need to be in the root directory of the project, not in the Drupal core folders.
If Drupal core is checked out at a feature branch, Composer may complain that dependencies are not met, because it does not see the feature branch as satisfying the dependency. You can either:
- Temporarily switch Drupal code back to the main branch, do Composer tasks, then switch it back.
- Define the version in the
repositoriessection of the project composer.json. - Define a branch alias in the project composer.json.
You can install additional packages from a path repository, in the same way that Drupal core is installed (although other packages will no require all the tweaks that Drupal core does!). This can be useful to develop packages and modules in tandem with core.
- Create a git clone of the module or package. The
repos/folder can be used for this. It's simplest to start off from a main branch so that Composer sees this as the installed version, and dependencies work properly. - Define a path respository for the package. See https://getcomposer.org/doc/05-repositories.md#path for details.
- Do
composer requirefor the package.
You can now switch the package to a feature branch, such as one from a merge request, in order to work on a feature or bug.
If you need to perform Composer operations, Composer may complain that the feature branch does not satisfy requirements. You can do one of:
- Check out the main branch with git, perform the Composer operations, then return to the feature branch.
- Define the version that Composer sees for this package by specifying the
"versions" option in the declaration of the path repository in
composer.json.
Contrib and custom module tests can't be run. For details, see joachim-n#14.
During some Composer commands you may see multiple copies of this error message:
Could not scan for classes inside [Drupal class filename].
These are harmless and can be ignored.
You can use the Drupal core git clone at repos/drupal/ in any way you like:
create feature branches, clone from drupal.org issue forks, and so on. Changes
you make to files in the git clone affect the project, since the git clone is
symlinked into it.
Changes to the Drupal core git clone's composer.json will be taken into account
by Composer. So for example, if pulling from the main branch of Drupal core
changes Composer dependencies, and in particular if you change to a different
core major or minor branch, you should run composer update on the project to
install these.
The following are required to run tests.
The simplest way to run tests with this setup is to put the phpunit.xml file in the project root and then run tests from there:
$ vendor/bin/phpunit web/core/PATH-TO-TEST-FILE/TestFile.php
- Copy the
phpunit-ddev.xmlfile that this template provides and rename it tophpunit.xml:
$ cp phpunit-ddev.xml phpunit.xml
- Change the BROWSERTEST_OUTPUT_BASE_URL value to the host URL of the project.
- Copy Drupal core's sample
phpunit.xml.dist`` file to the project root and rename it tophpunit.xml`:
$ cp web/core/phpunit.xml.dist phpunit.xml
- Change the
bootstrapattribute so the path is correct:
bootstrap="web/core/tests/bootstrap.php"
You can set up debugging in an IDE that's open at the repos/drupal folder, so
that it recognises the process being run from the project root.
For example, in VSCode, this is done as follows in the debugger configuration:
"pathMappings": {
// Make this work with the root project.
"/ABSOLUTE/PATH/TO/PROJECT/repos/drupal": "${workspaceRoot}"
}
The rest of this document is gory technical details you only need to know if you're working on this project template or debugging it.
The composer.json at the project root uses a Composer path repository so that when the drupal/drupal package is installed, it's symlinked in from the Drupal core git clone, at the branch that the clone has checked out.
Drupal core itself defines path repositories in its top-level composer.json. These need to be overridden in the project root composer.json so they point to inside the Drupal core git clone.
Additionally, the paths to the drupal/core-recommended and drupal/core-dev packages are defined as path repositories, so that the package versions which are fixed in those metapackages are respected in the project. This means the same versions are installed as if installing Composer packages on a plain git clone of Drupal core.
Contrib modules are made installable with the ComposerCoreVersionsLeniency Composer script.
Clone the repository for this template into, say, 'drupal-dev'.
$ cd drupal-dev
# Create a folder in which to store git clones, which Composer will symlink in.
$ mkdir repos
$ cd repos
# Clone Drupal core, to whatever branch you like.
$ git clone --branch 9.2.x https://git.drupalcode.org/project/drupal.git
# Go back to the project root.
$ cd ..
# Install packages with Composer.
$ composer install
The Drupal core git clone will be clean apart from:
sites/default/settings.php
vendor
Since it doesn't have a .gitignore at the top level, you can add one to ignore those files if you like.
To test how Composer creates a new project from the template, you need a git clone of the template repository.
In a separate location, do:
composer create-project joachim-n/drupal-core-development-project NEW_PROJECT_DIRECTORY --stability=dev --repository='{"url":"/path/to/git/clone/of/project/template/","type":"vcs"}'
Several workarounds are necessary to make Drupal core work correctly when symlinked into the project. These are all taken care of by Composer scripts during installation. Details are below.
Most if not all of these will no longer be needed once https://www.drupal.org/project/drupal/issues/1792310 is fixed.
The vendor folder has to be symlinked into the Drupal core repository, because otherwise code in core that expects to find a Composer autoloader fails.
This is done by a Composer script after initial installation. The manual command is:
ln -s ../../vendor ./repos/drupal/vendor
The index.php and update.php scaffold files have to be patched after they have been copied to web/index.php, because otherwise DrupalKernel guesses the Drupal app root as incorrectly being inside the Drupal core git clone, which means it can't find the settings.php file.
This is done by a Composer script after initial installation. The manual commands are:
cd web && patch -p1 <../scaffold/scaffold-patch-index-php.patch
cd web && patch -p1 <../scaffold/scaffold-patch-update-php.patch
See https://www.drupal.org/project/drupal/issues/3188703 for more detail.
The Drush cache:rebuild command does not work correctly if contrib modules are present, because it calls drupal_rebuild() which lets DrupalKernel guess the app root incorrectly.
This project template contains a /drush folder which has a command class which replaces that command with custom code to correctly handle the app root.
When running browser tests, the initial setup of Drupal in
FunctionalTestSetupTrait::prepareEnvironment() creates a site folder using the
real file locations with symlinks resolved, thus
repos/drupal/sites/simpletest, but during the request to the test site, Drupal
looks in /web/sites/simpletest.
Additionally, the HTML files output from Browser tests are written into the Drupal core git clone, and so the URLs shown in PHPUnit output are incorrect.
The fix for both of these is to create the simpletest site folder in the web root and symlink it into the Drupal core git clone.
This is done by a Composer script after initial installation. The manual command is:
mkdir -p web/sites/simpletest
ln -s ../../../web/sites/simpletest repos/drupal/sites
Drupal's /composer folder is not symlinked and therefore isn't visible to Composer. It's needed for some tests, and so is declared as an autoload location.
- Clone this repository by using
git clone --branch=master https://github.com/bhanu951/drupal-core-development-project.git - cd repos
- git clone --branch=10.1.x https://git.drupalcode.org/project/drupal.git drupal
- ddev get drud/ddev-selenium-standalone-chrome (downloads latest chrome driver)
- ddev composer install (from project root)
- ddev composer require drupal/admin_toolbar drupal/devel
- cd repos/drupal ;
git statusto track core changes
- ddev phpcs repo/drupal/core/<PATH_TO_FILE> (from project root)
- ddev phpcbf repo/drupal/core/<PATH_TO_FILE> (from project root)
- ddev phpunit repo/drupal/core/<PATH_TO_FILE> (from project root)
- ddev code-check (ddev equivalent of running
sh core/scripts/dev/commit-code-check.sh) - ddev drush [arguments] (from project root)
- Add DDEV PHPStan,Rector Commands
-
ddev drush si --site-name=drupal-145353
-
ping docker.for.mac.localhost