BSEC-Conduit Daemon

A first class Systemd process which acts as a conduit between between BSEC-Library and MQTT. Provides an alternative method of getting data out of an I2C connected Bosch BME680 sensor and into Home Assistant. Much more accurate than the native HA BME680 module, as it uses the Bosch Sensortec Environmental Cluster (BSEC) fusion library to process the raw BME680 sensor readings.

Thanks to @rstoermer for bsec_bme680.py upon which I based this. (https://github.com/rstoermer/bsec_bme680_python/)

Attribution

• BSEC-Conduit:
  • @TimothyBrown (2018)
  • MIT License

Requirements

• python-systemd
• paho.mqtt

sudo apt-get install python3-systemd python3-paho.mqtt or pip3 install python-systemd paho.mqtt

Installation

In this example we'll be installing into /opt/bsec with the user homeassistant on a recent Debian based distro (Raspbian/Hassbian):

• sudo mkdir /opt/bsec Create the directory.
• sudo chown homeassistant:homeassistant /opt/bsec Change permissions on the directory.
• sudo -u homeassistant -H -s Login as the user.
• git clone https://github.com/timothybrown/BSEC-Conduit.git /opt/bsec Clone the repo into our new directory.
• cd /opt/bsec Change into the directory.
• sudo python3 install.py Run the installer.
• nano bsec-conduit.ini Edit the config section at the top of the file. Use CTRL-X to save.
• sudo systemctl start bsec-conduit.service; journalctl -f -u bsec-conduit.service Start the program and open the log file.

Usage

Here's a typical log output when started for the first time, stopping and subsequent runs:

pi@raspberrypi ~# systemctl start bsec-conduit.service

 systemd[1]: Starting BSEC-Conduit Daemon...
 raspberrypi BSEC-Conduit[1234]: BSEC-Conduit v0.3.3
 raspberrypi BSEC-Conduit[1234]: Generated MQTT Client ID: BME680-A12BC3D4
 raspberrypi BSEC-Conduit[1234]: Generated MQTT Base Topic: raspberrypi/BME680
 raspberrypi BSEC-Conduit[1234]: Connected to MQTT Broker.
 raspberrypi BSEC-Conduit[1234]: BSEC-Library executable or hash file not found, starting build process.
 raspberrypi BSEC-Conduit[1234]: BSEC-Library source file not found, writing file: /opt/bsec/BSEC_1.4.7.1_Generic_Release_20180907/bsec-library.c
 raspberrypi BSEC-Conduit[1234]: Detected architecture as ARMv8 64-Bit.
 raspberrypi BSEC-Conduit[1234]: Build process complete.
 raspberrypi BSEC-Conduit[1234]: Created new BSEC-Library configuration [generic_33v_3s_28d].
 raspberrypi BSEC-Conduit[1234]: Created blank BSEC-Library state file.
 raspberrypi BSEC-Conduit[1234]: BSEC-Library started.
 raspberrypi systemd[1]: Started BSEC-Conduit Daemon.

pi@raspberrypi ~# systemctl stop bsec-conduit.service

raspberrypi systemd[1]: Stopping BSEC-Conduit Daemon...
raspberrypi BSEC-Conduit[1234]: Caught Signal 15 (SIGTERM).
raspberrypi BSEC-Conduit[1234]: BSEC-Library stopped.
raspberrypi BSEC-Conduit[1234]: Disconnected from MQTT Broker.
systemd[1]: Stopped BSEC-Conduit Daemon.

pi@raspberrypi ~# systemctl start bsec-conduit.service

 systemd[1]: Starting BSEC-Conduit Daemon...
 raspberrypi BSEC-Conduit[2345]: BSEC-Conduit v0.3.3
 raspberrypi BSEC-Conduit[2345]: Generated MQTT Client ID: BME680-A12BC3D4
 raspberrypi BSEC-Conduit[2345]: Generated MQTT Base Topic: raspberrypi/BME680
 raspberrypi BSEC-Conduit[2345]: Connected to MQTT Broker.
 raspberrypi BSEC-Conduit[2345]: Found existing BSEC-Library executable, skipping build.
 raspberrypi BSEC-Conduit[2345]: Using existing BSEC-Library configuration [generic_33v_3s_28d].
 raspberrypi BSEC-Conduit[2345]: Found existing BSEC-Library state file, skipping creation.
 raspberrypi BSEC-Conduit[2345]: BSEC-Library started.
 raspberrypi systemd[1]: Started BSEC-Conduit Daemon.

Version History

• v0.1.0: 2018.08.01
  • Rstoermer's original script.
• v0.2.0: 2018.10.20
  • Initial rewrite of rstoermer's code.
  • Changed paho.mqtt to use connect_async method. This means it will establish a connection and stay connected until the daemon exits. The original code used the single publish function for each message, which connected/disconnected to/from the server for every message. This causes a lot of log spam and churning of the Mosquitto persistence database.
  • Changed from publishing to a single topic with a JSON payload to publishing to multiple topics with a standard payload, one for each sensor value. (I.e., sensors/BME680/Temperature, sensors/BME680/Humidity, etc.) This means you no longer have to use a value_template in Home Assistant and seems a more MQTTy way of doing things.
  • Made small changes to the way the BSEC-Library process is opened.
  • Changed the way that output floats are rounded.
  • Added a counter for the sample loop instead of relying on len().
  • Added a signal handler to exit cleanly (sends SIGTERM to the BSEC-Library process, sets the status topic and stops the MQTT client loop).
  • No longer publish the BSEC-Library Status value, as it's not a useful metric. Instead we monitor it in the script and if it changes to a non-zero value we report the value as an error in the system log and exit. (Systemd should restart the daemon up to 5 times, so if it was a temporary problem no user action is required.)
  • Made the main loop a function.
  • Many other small changes.
• v0.2.1: 2018.10.23
  • Added Systemd Journal logging output.
  • Moved all user editable options to the top of the script for ease of configuration.
  • Adds ability to run as a Systemd notify process.
  • Adds Systemd Watchdog support.
  • Adds Home Assistant MQTT Discovery support!
  • Added basic sanity checking on some of the user configuration.
  • Made all MQTT topics persistent, which prevents gaps in your history graph if HA starts before we publish our first reading. Likewise it also allows the discovery feature to work if the daemon starts before HA, which it should. (The way to fix the latter problem would be for the daemon to monitor the homeassistant/status topic and only publish discovery when it changes to online; that said, making the topics persistent solves the problem, so...)
  • Added a feature to automatically generate an MQTT client ID out of the last eight digits of the RPi's serial number. Example: BME680-A12BC3D4 This is more descriptive than paho.mqtt's default random ID, which we fall back on if we're not running on a Raspberry Pi.
• v0.2.2: 2018.10.24
  • Lots of code cleanup and refactoring!
  • Made several changes to the way samples are stored and processed:
    1. Switched from a list to a deque for storing the samples.
    2. Switched from statistics.median() to statistics.mean() for processing sample data. The BSEC-Library already takes care of filtering outliers, so the mean value of the period should be a better representation of the data, even without weighting enabled.
    3. Implemented an option to enable increasing the sample cache size. We now store Cache Multiplier * (Update Rate / BSEC Sample Rate [3|300]) worth of samples.
  • Added an option to report IAQ in percentage instead of the raw value. This seems to be an easier to read metric than an arbitrary number. (Though we lose one digit of precision in the process.)
  • Changed the IAQ Accuracy output from a number to a descriptive string: 0 = Stabilizing, 1 = Low, 2 = Medium, 3 = High
• v0.2.3: 2018.10.27
  • Added automatic detection of BSEC-Library file parameters. This will help with implementing automatic configuration and builds in the next version.
  • Added startup checks to verify the BSEC-Library directory, bsec_bme680 executable and bsec_iaq.config file all exist.
• v0.3.0: 2018.11.05
  • Major changes!
  • I spent over a week stability testing previous code. BSEC-Conduit ran non-stop for 5 days with no memory leaks or crashes.
  • Implemented the BSECLibrary class, which takes care of building the bsec_library executable, copying the config file and running the process. This now makes BSEC-Conduit fully stand-alone! You no longer have to build the bsec_library executable as our class takes care that for you. Simply supply the Bosch BSEC source and we'll take care of the rest! See the revision information of BSECLibrary for more information.
  • Added an install.py script to take care of setting up the Systemd service, downloading the BSEC source and so on. This is in preparation for release.
• v0.3.1: 2018.11.07
  • Public Release
• v0.3.2: 2018.11.08
  • Moved config options out of the BSEC-Conduit script and into an INI file. This should make things easier to configure.
  • Cleaned up and added some comments.
  • Made some small changes to installer.py.
• v0.3.3: 2018.11.10
  • Added code to set a custom process name. This allows the program to show up in tools such as top by process name: bsec-conduit vs python3 /path/to/bsec-conduit.
  • A bit more code cleanup.

BSECLibrary

Uses the Bosch BSEC sensor fusion library to retrieve and process data from a BME680 sensor.

Attribution

• BSEC-Conduit:
  • @TimothyBrown (2018)
  • MIT License
• bme680_bsec.c:
  • Original by @alexh.name (2017)
  • I2C Code by @twartzek (2017)
  • Modifications by @TimothyBrown (2018)
  • MIT License
• BSEC 1.4.7.1 Generic Release (2018):
  • Bosch Sensortec GmbH
  • Private License

Usage

BSECLibrary(i2c_address, temp_offset, sample_rate, voltage, retain_state, logger=None, base_dir=None)

• i2c_address: Address of the sensor. [0x76|0x77]
• temp_offset: An offset to add to the temperature sensor. [10.0 to -10.0]
• sample_rate: Seconds between samples. [3|300]
• voltage: The voltage the sensor is run at. [3.3|1.8]
• retain_state: Number of days to retain the IAQ state data. [4|28]
• logger: Logger instance to use. Use None for console output.
• base_dir: Directory to store the executable, config and state files. Must also include a sub-directory that contains an unzipped copy of the Bosch Sensortec BSEC source. Use None to automatically determine.

BSECLibrary.open()

Call to start the underlying BSEC-Library communication process.

BSECLibrary.close()

Call to stop the underlying BSEC-Library communication process.

BSECLibrary.output()

Returns an iterator that you can loop over forever. Blocks between samples from the sensor. Each item is a dict() that contains the following keys:

• IAQ Accuracy
• IAQ
• Temperature
• Humidity
• Pressure
• Status

Example

from bseclib import BSECLibrary

bsec_lib = BSECLibrary(0x77, 2.0, 3, 3.3, 4)
count = 0
bsec_lib.open()
for sample in bsec_lib.output():
    print(sample)
    if count == 10:
        bsec_lib.close()
        exit()
    else:
        count += 1

Version History

• v0.1.0: 2018.11.05
  • Initial version!
  • Moved all the bsec_library process creation code from BSEC-Conduit into this class.
  • Created functions to build the bsec_library process, copy the config and create a state file.
  • Embedded the underlying bsec_library.c file directly into the library.
  • Currently using a hack to determine processor type. Fix in next release.
• v0.1.1: 2018.11.06
  • Implemented a function to decode the Revision line from /proc/cpuinfo. This gives specific information like the BCM processor used and the model number. We use this to figure out if we've got an ARMv8 processor; this is required because platform.machine() will return ARMv7 even on the RPi 3. The code will also detect non-Pi ARM machines, like the BeagleBone.
  • Modified the underlying bme680_bsec.c file to support setting options via command line arguments, instead of static #defines in the source. This allows us to dynamically change configurations without recompiling.
  • Implemented the output() generator, which takes care of reading JSON data from the underlying bsec_library process, converting it and returning a dict of sensor values. This allows you to directly iterate over output() in your script without worrying about JSON, strings or bytes.
  • Added tons of error handling to the get_exec(), get_config() and get_state() functions.
  • Much cleanup, but still lacking comments in many places. (Some didn't make it from BSEC-Conduit, others weren't fit for public consumption just yet. Normally I write a skeleton program in comments before writing the actual code, to help organize things. I'll add comments for the next release.)
• v0.1.2: 2018.11.07
  • Public Release!
• v0.1.3: 2018.11.08
  • Fixed a bug that caused the library to crash while performing a hash comparison of the bsec_library executable.
  • Cleaned up and added comments.
• v0.1.4: 2018.11.10
  • Changed the name of the underlying process from bsec_library to bsec-library to better match overall naming conventions.