Amazon Web Services (AWS) JDBC Driver for MySQL

The Amazon Web Services (AWS) JDBC Driver for MySQL allows an application to take advantage of the features of clustered MySQL databases. It is based on and can be used as a drop-in compatible for the MySQL Connector/J driver, and is compatible with all MySQL deployments.

The AWS JDBC Driver for MySQL supports fast failover for Amazon Aurora with MySQL compatibility. Support for additional features of clustered databases, including features of Amazon RDS for MySQL and on-premises MySQL deployments, is planned.

What is Failover?

An Amazon Aurora DB cluster uses failover to automatically repairs the DB cluster status when a primary DB instance becomes unavailable. During failover, Aurora promotes a replica to become the new primary DB instance, so that the DB cluster can provide maximum availability to a primary read-write DB instance. The AWS JDBC Driver for MySQL is designed to coordinate with this behavior in order to provide minimal downtime in the event of a DB instance failure.

Benefits of the AWS JDBC Driver for MySQL

Although Aurora is able to provide maximum availability through the use of failover, existing client drivers do not fully support this functionality. This is partially due to the time required for the DNS of the new primary DB instance to be fully resolved in order to properly direct the connection. The AWS JDBC Driver for MySQL fully utilizes failover behavior by maintaining a cache of the Aurora cluster topology and each DB instance's role (Aurora Replica or primary DB instance). This topology is provided via a direct query to the Aurora database, essentially providing a shortcut to bypass the delays caused by DNS resolution. With this knowledge, the AWS JDBC Driver can more closely monitor the Aurora DB cluster status so that a connection to the new primary DB instance can be established as fast as possible. Additionally, as noted above, the AWS JDBC Driver is designed to be a drop-in compatible for other MySQL JDBC drivers and can be used to interact with RDS and MySQL databases as well as Aurora MySQL.

Differences between the AWS MySQL JDBC driver and the AWS JDBC Driver

The AWS JDBC Driver for MySQL is based on the open-sourced MySQL Connector/J JDBC driver and allows users to take advantage of the features of Amazon Aurora databases. The AWS JDBC driver for MySQL can be used only with MySQL databases or MySQL-compatible Amazon RDS and Amazon Aurora clusters.

The AWS JDBC Driver provides similar functionalities, but is not specific to a certain vendor database. This driver instead uses a feature layer for JDBC on top of an existing database driver that the user specifies. It was designed to work with multiple relational databases and also different drivers, whether they are community-based or proprietary drivers. The AWS JDBC Driver currently supports the MySQL and PostgreSQL databases.

Once the AWS JDBC Driver was released, it was decided new features would not be added to the AWS JDBC Driver for MySQL and that future development would be taking place in the AWS JDBC Driver project. More details can be found in the maintenance policy. The AWS JDBC Driver for MySQL is now behind in terms of features and only receives security and critical fixes. The current maintenance window for the AWS JDBC Driver for MySQL ends on July 25, 2024, and it is recommended to migrate to the AWS JDBC Driver before that date. There is a migration guide available in the AWS JDBC Driver documentation to assist users through the migration process.

For new users who are wondering which one driver to use, it is recommended to use the AWS JDBC Driver.

Getting Started

Prerequisites

You need to install Amazon Corretto 8+ or Java 8+ before using the AWS JDBC Driver for MySQL.

Installing or Upgrading the AWS JDBC Driver for MySQL

Direct Download of the .jar file

The AWS JDBC Driver for MySQL can be installed from pre-compiled packages that can be downloaded directly from GitHub Releases or Maven Central. To install the driver, obtain the corresponding JAR file and include it in the application's CLASSPATH:

Example - Direct download with wget

wget https://github.com/awslabs/aws-mysql-jdbc/releases/download/1.1.14/aws-mysql-jdbc-1.1.14.jar
cp aws-mysql-jdbc-1.1.14.jar /home/userx/libs/
export CLASSPATH=$CLASSPATH:/home/userx/libs/aws-mysql-jdbc-1.1.14.jar

Upgrading to a newer version with wget

To upgrade the driver, replace the .jar file of your earlier driver with the new .jar file. After replacing the .jar file, update the CLASSPATH to include the name of the new file. For example, to upgrade to version 1.1.14:

wget https://github.com/awslabs/aws-mysql-jdbc/releases/download/1.1.14/aws-mysql-jdbc-1.1.14.jar
cp aws-mysql-jdbc-1.1.14.jar /home/userx/libs/
export CLASSPATH=$CLASSPATH:/home/userx/libs/aws-mysql-jdbc-1.1.14.jar

As a Maven dependency

You can use Maven's dependency management to obtain the driver by adding the following configuration to the application's Project Object Model (POM) file:

Example - Maven

<dependencies>
  <dependency>
    <groupId>software.aws.rds</groupId>
    <artifactId>aws-mysql-jdbc</artifactId>
    <version>1.1.14</version>
  </dependency>
</dependencies>

Upgrading to a newer version with Maven

To upgrade to a newer version of the driver, replace the version number identified in the pom.xml file with the newer driver version. For example, to upgrade to version 1.1.14, modify the file to include:

<dependencies>
  <dependency>
    <groupId>software.aws.rds</groupId>
    <artifactId>aws-mysql-jdbc</artifactId>
    <version>1.1.14</version>
  </dependency>
</dependencies>

As a Gradle dependency

You can use Gradle's dependency management to obtain the driver by adding the following configuration to the application's build.gradle file:

Example - Gradle

dependencies {
    implementation group: 'software.aws.rds', name: 'aws-mysql-jdbc', version: '1.1.14'
}

Upgrading to a newer version with Gradle

To upgrade to a newer version of the driver, replace the version number identified in the application's build.gradle file with the newer driver version. For example, to upgrade to version 1.1.14:

dependencies {
    implementation group: 'software.aws.rds', name: 'aws-mysql-jdbc', version: '1.1.14'
}

Using an IDE (IntelliJ)

To use the driver with an IDE (for example, IntelliJ), download the .jar file and copy it into your libs folder. Then, add the file to your CLASSPATH:

Example - IntelliJ

wget https://github.com/awslabs/aws-mysql-jdbc/releases/download/1.1.14/aws-mysql-jdbc-1.1.14.jar
cp aws-mysql-jdbc-1.1.14.jar /home/userx/libs/
export CLASSPATH=$CLASSPATH:/home/userx/libs/aws-mysql-jdbc-1.1.14.jar

After downloading the .jar file and updating the CLASSPATH, add the driver information to your Project:

1. Open Project Structure in the IntelliJ user interface.

2. Select Modules.

3. Open the Dependencies tab for your project.

4. Add the AWS JDBC Driver for MySQL .jar file.

5. Update the connection URL prefix from jdbc:mysql:// to jdbc:mysql:aws://.

Upgrading to a newer version with IntelliJ

To upgrade to a newer version of the driver, download the updated driver, and add it to your CLASSPATH:

wget https://github.com/awslabs/aws-mysql-jdbc/releases/download/1.1.14/aws-mysql-jdbc-1.1.14.jar
cp aws-mysql-jdbc-1.1.14.jar /home/userx/libs/
export CLASSPATH=$CLASSPATH:/home/userx/libs/aws-mysql-jdbc-1.1.14.jar

Then, follow the steps listed above to update your project to the latest version.

Using the Driver with a database client (DBeaver)

To use the driver with the DBeaver database client, download the .jar file, copy the file to your libs folder, and add the file to your CLASSPATH:

Example - DBeaver

wget https://github.com/awslabs/aws-mysql-jdbc/releases/download/1.1.14/aws-mysql-jdbc-1.1.14.jar
cp aws-mysql-jdbc-1.1.14.jar /home/userx/libs/
export CLASSPATH=$CLASSPATH:/home/userx/libs/aws-mysql-jdbc-1.1.14.jar

After downloading the .jar file and adding it to your CLASSPATH, add the driver information to the DBeaver client:

1. Open DBeaver’s Driver Manager window and click New to add the AWS JDBC Driver.

2. In Settings, enter the following information:

   Default Port: 3306
   Driver Name: AWS JDBC Driver for MySQL
   Class Name: software.aws.rds.jdbc.mysql.Driver
   URL Template: jdbc:mysql:aws://{host}:{port}

3. Go to the Libraries tab, click Add Artifact and add the following dependency declaration:

   <dependency>
     <groupId>software.aws.rds</groupId>
     <artifactId>aws-mysql-jdbc</artifactId>
   </dependency>

4. DBeaver will respond: Artifacts Found: 1.

5. (Optional) To enable database selector in the UI, you can add custom queries to DBeaver. Go to the Advanced parameters and edit the following queries:

   Get active database: select database()
   Set active database: use ?

6. Click OK to finish adding the driver.

After adding driver information, you can create new connections that use the AWS JDBC Driver for MySQL.

Upgrading to a newer version with the DBeaver Client

To upgrade to a newer version of the driver, download the updated driver, and add it to your CLASSPATH:

wget https://github.com/awslabs/aws-mysql-jdbc/releases/download/1.1./aws-mysql-jdbc-1.1.14.jar
cp aws-mysql-jdbc-1.1.14.jar /home/userx/libs/
export CLASSPATH=$CLASSPATH:/home/userx/libs/aws-mysql-jdbc-1.1.14.jar

Then, follow the steps listed above to update your DBeaver client settings.

Using a Snapshot of the Driver

If there is an unreleased feature you would like to try, it may be available in a snapshot build of the driver. Snapshot builds can be found here. To use a snapshot, find the desired .jar file, which will be named aws-mysql-jdbc-<version>-<date>-<time>-<snapshot-number>.jar, and add it to your project as a dependency.

As a Maven dependency

<dependencies>
  <dependency>
    <groupId>software.aws.rds</groupId>
    <artifactId>aws-mysql-jdbc</artifactId>
    <version>1.1.15</version>
    <scope>system</scope>
    <systemPath>path-to-snapshot-jar</systemPath>
  </dependency>
</dependencies>

As a Gradle dependency

dependencies {
    implementation(files("path-to-snapshot-jar"))
}

Using the AWS JDBC Driver for MySQL

The AWS JDBC Driver for MySQL is drop-in compatible, so usage is identical to the MySQL-Connector-J JDBC driver. The sections below highlight driver usage specific to failover.

Driver Name

Use the driver name: software.aws.rds.jdbc.mysql.Driver. You'll need the driver name when loading the driver explicitly to the driver manager.

Connection URL Descriptions

There are many different types of URLs that can connect to an Aurora DB cluster; this section outlines the various URL types. For some URL types, the AWS JDBC Driver requires the user to provide some information about the Aurora DB cluster to provide failover functionality. For each URL type, information is provided below on how the driver will behave and what information the driver requires about the DB cluster, if applicable.

Note: The connection string follows standard URL parameters. In order to add parameters to the connection string, simply add ? and then the parameter_name=value pair at the end of the connection string. You may add multiple parameters by separating the parameter name and value set (parameter_name=value) with the & symbol. For example, to add 2 parameters simply add ?param_name=value&param_2=value2 at the end of the connection string.

URL Type	Example	Required Parameters	Driver Behavior
Cluster Endpoint	jdbc:mysql:aws://db-identifier.cluster-XYZ.us-east-2.rds.amazonaws.com:3306	None	Initial connection: primary DB instance Failover behavior: connect to the new primary DB instance
Read-Only Cluster Endpoint	jdbc:mysql:aws://db-identifier.cluster-ro-XYZ.us-east-2.rds.amazonaws.com:3306	None	Initial connection: any Aurora Replica Failover behavior: prioritize connecting to any active Aurora Replica but might connect to the primary DB instance if it provides a connection first
Instance Endpoint	jdbc:mysql:aws://instance-1.XYZ.us-east-2.rds.amazonaws.com:3306	None	Initial connection: the instance specified (DB instance 1) Failover behavior: connect to the primary DB instance
RDS Custom Cluster	jdbc:mysql:aws://db-identifier.cluster-custom-XYZ.us-east-2.rds.amazonaws.com:3306	None	The driver does not support custom clusters yet. Initial connection: the primary instance in the cluster Failover behavior: connect to the primary DB instance
IP Address	jdbc:mysql:aws://10.10.10.10:3306	clusterInstanceHostPattern	Initial connection: the DB instance specified Failover behavior: connect to the primary DB instance
Custom Domain	jdbc:mysql:aws://my-custom-domain.com:3306	clusterInstanceHostPattern	Initial connection: the DB instance specified Failover behavior: connect to the primary DB instance
Non-Aurora Endpoint	jdbc:mysql:aws://localhost:3306	None	A regular JDBC connection will be returned - no failover functionality
Aurora Endpoint (through a custom tunnel)	jdbc:mysql:aws://localhost:3306	clusterInstanceHostPattern	Initial connection: the DB instance specified Failover behavior: connect to the primary DB instance

Information about the clusterInstanceHostPattern parameter is provided in the section below.

For more information about parameters that can be configured with the AWS JDBC Driver, see the section below about failover parameters.

Connection Plugin Manager

The connection plugin manager initializes, triggers, and cleans up a chain of connection plugins. Connection plugins are widgets attached to each Connection object to help execute additional or supplementary logic related to that Connection. Failover and Enhanced Failure Monitoring are both examples of connection plugins.

Failover and Enhanced Failure Monitoring are loaded by default. Additional custom plugins can be implemented and used alongside existing ones. Plugins can be loaded in a specific order to create a chain, and each plugin will pass its results to the next.

NOTE: Loading custom plugins will not include Enhanced Failure Monitoring and the Failover Connection Plugin unless explicitly stated through the connectionPluginFactories parameter.

The figure above shows a simplified workflow of the connection plugin manager.

Starting at the top, when a JDBC method is executed by the driver, it is passed to the connection plugin manager. From the connection plugin manager, the JDBC method is passed in order to each plugin, and loaded like a chain. In this example, the method is passed first to Custom Plugin A, then to Custom Plugin B, and finally to Default Plugin which executes the JDBC method and returns the result back through the chain.

By default, the Enhanced Failure Monitoring plugin is loaded. Additional custom plugins can be implemented and used alongside existing ones. You can chain plugins together in a specified order. Loaded custom plugins will not include the Enhanced Failure Monitoring plugin unless explicitly stated with the connectionPluginFactories parameter.

The AWS JDBC Driver for MySQL attaches the DefaultConnectionPlugin to the tail of the connection plugin chain and actually executes the given JDBC method.

Since all the connection plugins are chained together, the earlier connection plugins affect the latter plugins. If the connection plugin at the head of the connection plugin chain measures the execution time, this measurement would encompass the time spent in all the connection plugins down the chain.

To learn how to write custom plugins, refer to examples located inside Custom Plugins Demo.

Connection Plugin Manager Parameters

Parameter	Value	Required	Description	Default Value
useConnectionPlugins	Boolean	No	When set to the default value true, the connection plugins will be loaded, including the Failover and Enhanced Failure Monitor plugins. When set to false, the connection plugins will not be loaded and the driver will instead execute JDBC methods directly. NOTE: Since the failover functionality and Enhanced Failure Monitoring are implemented with plugins, disabling connection plugins will also disable such functionality.	true
connectionPluginFactories	String	No	String of fully-qualified class name of plugin factories that will create the plugin objects. Each factory in the string should be comma-separated , NOTE: The order of factories declared matters. Example: customplugins.MethodCountConnectionPluginFactory, customplugins.ExecutionTimeConnectionPluginFactory,software.aws.rds.jdbc.mysql.shading.com.mysql.cj.jdbc.ha.plugins.NodeMonitoringConnectionPluginFactory	software.aws.rds.jdbc.mysql.shading.com.mysql.cj.jdbc.ha.plugins.failover.FailoverConnectionPluginFactory, software.aws.rds.jdbc.mysql.shading.com.mysql.cj.jdbc.ha.plugins.NodeMonitoringConnectionPluginFactory

Failover Plugin

The failover plugin is loaded by default and can be disabled by setting parameter enableClusterAwareFailover to false.

The AWS JDBC Driver Failover Process

The figure above provides a simplified overview of how the AWS JDBC Driver handles an Aurora failover encounter. Starting at the top of the diagram, an application with the AWS JDBC Driver on its class path uses the driver to get a logical connection to an Aurora database.

In this example, the application requests a connection using the Aurora DB cluster endpoint and is returned a logical connection that contains a physical connection to DB instance C, the primary DB instance in the DB cluster. Due to how the application operates against the logical connection, the physical connection details about which specific DB instance it is connected to have been abstracted away.

Over the course of the application's lifetime, it executes various statements against the logical connection. If DB instance C is stable and active, these statements succeed and the application continues as normal. If DB instance C later experiences a failure, Aurora will initiate failover to promote a replica to a new primary DB instance (DB instance A or B in this case). At the same time, the AWS JDBC Driver will intercept the related communication exception and kick off its own internal failover process.

In this case, in which the primary DB instance has failed, the driver will use its internal topology cache to temporarily connect to an active Aurora Replica. The topology cache will contain information regarding which instances are available. The active Aurora Replica the driver has connected to will be periodically queried for the DB cluster topology until the new primary DB instance is identified (DB instance A or B).

At this point, the driver will connect to the new primary DB instance and return control to the application by raising a SQLException with SQLState 08S02 so that they can reconfigure their session state as required. Although the DNS endpoint for the DB cluster might not yet resolve to the new primary DB instance, the driver has already discovered this new DB instance during its failover process and will be directly connected to it when the application continues executing statements.

To the application, the logical connection will not appear to have changed, but the physical connection will have been swapped to the new primary DB instance. In this way the driver provides a faster way to reconnect to a newly promoted DB instance, thus increasing the availability of the DB cluster.

Failover Parameters

In addition to the parameters that you can configure for the MySQL Connector/J driver, you can pass the following parameters to the AWS JDBC Driver through the connection URL to specify additional driver behavior.

Parameter	Value	Required	Description	Default Value
enableClusterAwareFailover	Boolean	No	Set to true to enable the fast failover behavior offered by the AWS JDBC Driver. Set to false for simple JDBC connections that do not require fast failover functionality. NOTE: In addition to this parameter, since the failover functionality is implemented with connection plugins, disabling useConnectionPlugins will also disable the failover functionality. When useConnectionPlugins is enabled, the failover plugin will be loaded by default regardless of whether enableClusterAwareFailover is true or false.	true
clusterInstanceHostPattern	String	If connecting using an IP address or custom domain URL: Yes Otherwise: No	This parameter is not required unless connecting to an AWS RDS cluster via an IP address or custom domain URL. In those cases, this parameter specifies the cluster instance DNS pattern that will be used to build a complete instance endpoint. A "?" character in this pattern should be used as a placeholder for the DB instance identifiers of the instances in the cluster. Example: ?.my-domain.com, any-subdomain.?.my-domain.com:9999 Usecase Example: If you have a custom domain ( dev.rds.mydomain.com) as a CNAME to an RDS cluster (dev-cluster.cluster-cmdXXXXXX.eu-west-2.rds.amazonaws.com.) then the paramater is clusterInstanceHostPattern=?.cmdXXXXXX.eu-west-2.rds.amazonaws.com	If the provided connection string is not an IP address or custom domain, the driver will automatically acquire the cluster instance host pattern from the customer-provided connection string.
clusterId	String	No	A unique identifier for the cluster. Connections with the same cluster ID share a cluster topology cache. This connection parameter is not required and thus should only be set if desired.	The driver will automatically acquire a cluster id for AWS RDS clusters.
clusterTopologyRefreshRateMs	Integer	No	Cluster topology refresh rate in milliseconds. The cached topology for the cluster will be invalidated after the specified time, after which it will be updated during the next interaction with the connection.	30000
failoverTimeoutMs	Integer	No	Maximum allowed time in milliseconds to attempt reconnecting to a new writer or reader instance after a cluster failover is initiated.	60000
failoverClusterTopologyRefreshRateMs	Integer	No	Cluster topology refresh rate in milliseconds during a writer failover process. During the writer failover process, cluster topology may be refreshed at a faster pace than normal to speed up discovery of the newly promoted writer.	5000
failoverWriterReconnectIntervalMs	Integer	No	Interval of time in milliseconds to wait between attempts to reconnect to a failed writer during a writer failover process.	5000
failoverReaderConnectTimeoutMs	Integer	No	Maximum allowed time in milliseconds to attempt to connect to a reader instance during a reader failover process.	5000
acceptAwsProtocolOnly	Boolean	If using simultaneously with another MySQL driver that supports the same protocols: Yes Otherwise: No	Set to true to only accept connections for URLs with the jdbc:mysql:aws:// protocol. This setting should be set to true when running an application that uses this driver simultaneously with another MySQL driver that supports the same protocols (e.g. the MySQL JDBC Driver), to ensure the driver protocols do not clash. This behavior can also be set at the driver level for every connection via the Driver.setAcceptAwsProtocolOnly method; however, this connection parameter will take priority when present.	false
gatherPerfMetrics	Boolean	No	Set to true if you would like the driver to record failover-associated metrics. To print collected metrics, call IClusterAwareMetricsReporter.reportMetrics(String connUrl, Log log). e.g. IClusterAwareMetricsReporter.reportMetrics(db-identifier.cluster-ro-XYZ.us-east-2.rds.amazonaws.com:3306, myLog) To reset collected metrics, call IClusterAwareMetricsReporter.reportMetrics().	false
gatherMetricsPerInstance	Boolean	No	Set to true to gather additional performance metrics per instance as well as cluster. Set to false to only gather performance metrics per cluster. To print collected metrics at instance level, call IClusterAwareMetricsReporter.reportMetrics(String connUrl, Log log, true).	false
allowXmlUnsafeExternalEntity	Boolean	No	Set to true if you would like to use XML inputs that refer to external entities. WARNING: Setting this to true is unsafe since your system to be prone to XXE attacks.	false
keepSessionStateOnFailover	Boolean	No	This parameter will allow connections to retain the session state after failover. When keepSessionStateOnFailover is set to false, connections will need to be reconfigured as seen in the examples here. When this parameter is true, the autocommit, sessionMaxRows and transactionIsolation values will be kept. This parameter is only necessary when the session state must be retained and the connection cannot be manually reconfigured by the user. Please note: this parameter will not be able to fully restore the connection session state, as it will only save the autocommit, sessionMaxRows and transactionIsolation values.	false
enableFailoverStrictReader	Boolean	No	Set to true to only allow failover to reader nodes during the reader failover process. If enabled, reader failover to a writer node will only be allowed for single-node clusters. This logic mimics the logic of the Aurora read-only cluster endpoint.	false

Failover Exception Codes

08001 - Unable to Establish SQL Connection

When the driver throws a SQLException with code 08001, the original connection failed, and the driver tried to failover to a new instance, but was not able to. There are various reasons this may happen: no nodes were available, a network failure occurred, and so on. In this scenario, please wait until the server is up or other problems are solved (an exception will be thrown.)

08S02 - Communication Link

When the driver throws a SQLException with code 08S02, the original connection failed while autocommit was set to true, and the driver successfully failed over to another available instance in the cluster. However, any session state configuration of the initial connection is now lost. In this scenario, you should:

• Reconfigure and reuse the original connection (the reconfigured session state will be the same as the original connection).

• Repeat the query that was executed when the connection failed and continue work as desired.

Sample Code

import java.sql.*;

/**
 * Scenario 1: Failover happens when autocommit is set to true - Catch SQLException with code 08S02.
 */
public class FailoverSampleApp1 {

   private static final String CONNECTION_STRING = "jdbc:mysql:aws://db-identifier.cluster-XYZ.us-east-2.rds.amazonaws.com:3306/employees";
   private static final String USERNAME = "username";
   private static final String PASSWORD = "password";
   private static final int MAX_RETRIES = 5;

   public static void main(String[] args) throws SQLException {
      try (Connection conn = DriverManager.getConnection(CONNECTION_STRING, USERNAME, PASSWORD)) {
         // Configure the connection.
         setInitialSessionState(conn);

         // Do something with method "betterExecuteQuery" using the Cluster-Aware Driver.
         String select_sql = "SELECT * FROM employees";
         try (ResultSet rs = betterExecuteQuery(conn, select_sql)) {
            while (rs.next()) {
               System.out.println(rs.getString("first_name"));
            }
         }
      }
   }

   private static void setInitialSessionState(Connection conn) throws SQLException {
      // Your code here for the initial connection setup.
      try (Statement stmt1 = conn.createStatement()) {
         stmt1.executeUpdate("SET time_zone = \"+00:00\"");
      }
   }

   // A better executing query method when autocommit is set as the default value - true.
   private static ResultSet betterExecuteQuery(Connection conn, String query) throws SQLException {
      // Record the times of retry.
      int retries = 0;

      while (true) {
         try {
            Statement stmt = conn.createStatement();
            return stmt.executeQuery(query);
         } catch (SQLException e) {
            // If the attempt to connect has failed MAX_RETRIES times,            
            // throw the exception to inform users of the failed connection.
            if (retries > MAX_RETRIES) {
               throw e;
            }

            // Failover has occurred and the driver has failed over to another instance successfully.
            if ("08S02".equalsIgnoreCase(e.getSQLState())) {
               // Reconfigure the connection.
               setInitialSessionState(conn);
               // Re-execute that query again.
               retries++;

            } else {
               // If some other exception occurs, throw the exception.
               throw e;
            }
         }
      }
   }
}

08007 - Transaction Resolution Unknown

When the driver throws a SQLException with code 08007, the original connection failed within a transaction (while autocommit was set to false). In this scenario, the driver first attempts to rollback the transaction and then fails over to another available instance in the cluster. Note that the rollback might be unsuccessful as the initial connection may be broken at the time that the driver recognizes the problem. Note also that any session state configuration of the initial connection is now lost. In this scenario, you should:

• Reconfigure and reuse the original connection (the reconfigured session state will be the same as the original connection).

• Re-start the transaction and repeat all queries which were executed during the transaction before the connection failed.

• Repeat the query that was executed when the connection failed and continue work as desired.

If autocommit is set to false, and the connection cannot be reconfigured manually by the user, the failover parameter keepSessionStateOnFailover can be used to retain some session parameters, as they would be reset otherwise.

Sample Code

import java.sql.*;

/**
 * Scenario 2: Failover happens when autocommit is set to false - Catch SQLException with code 08007.
 */
public class FailoverSampleApp2 {

   private static final String CONNECTION_STRING = "jdbc:mysql:aws://db-identifier.cluster-XYZ.us-east-2.rds.amazonaws.com:3306/employees";
   private static final String USERNAME = "username";
   private static final String PASSWORD = "password";
   private static final int MAX_RETRIES = 5;

   public static void main(String[] args) throws SQLException {
      String[] update_sql = {
              "INSERT INTO employees(emp_no, birth_date, first_name, last_name, gender, hire_date) VALUES (5000000, '1958-05-01', 'John', 'Doe', 'M', '1997-11-30')",
              "INSERT INTO employees(emp_no, birth_date, first_name, last_name, gender, hire_date) VALUES (5000001, '1958-05-01', 'Mary', 'Malcolm', 'F', '1997-11-30')",
              "INSERT INTO employees(emp_no, birth_date, first_name, last_name, gender, hire_date) VALUES (5000002, '1958-05-01', 'Tom', 'Jerry', 'M', '1997-11-30')"
      };

      try (Connection conn = DriverManager.getConnection(CONNECTION_STRING, USERNAME, PASSWORD)) {
         // Configure the connection - set autocommit to false.
         setInitialSessionState(conn);

         // Do something with method "betterExecuteUpdate_setAutoCommitFalse" using the Cluster-Aware Driver.           
         betterExecuteUpdate_setAutoCommitFalse(conn, update_sql);
      }
   }

   private static void setInitialSessionState(Connection conn) throws SQLException {
      // Your code here for the initial connection setup.
      try (Statement stmt1 = conn.createStatement()) {
         stmt1.executeUpdate("SET time_zone = \"+00:00\"");
      }
      conn.setAutoCommit(false);
   }

   // A better executing query method when autocommit is set to false.
   private static void betterExecuteUpdate_setAutoCommitFalse(Connection conn, String[] queriesInTransaction) throws SQLException {
      // Create a boolean flag.
      boolean isSuccess = false;
      // Record the times of retry.
      int retries = 0;

      while (!isSuccess) {
         try (Statement stmt = conn.createStatement()) {
            for (String sql : queriesInTransaction) {
               stmt.executeUpdate(sql);
            }
            conn.commit();
            isSuccess = true;
         } catch (SQLException e) {

            // If the attempt to connect has failed MAX_RETRIES times,
            // rollback the transaction and throw the exception to inform users of the failed connection.
            if (retries > MAX_RETRIES) {
               conn.rollback();
               throw e;
            }

            // Failure happens within the transaction and the driver failed over to another instance successfully.
            if ("08007".equalsIgnoreCase(e.getSQLState())) {
               // Reconfigure the connection, restart the transaction.
               setInitialSessionState(conn);
               // Re-execute every queries that were inside the transaction.
               retries++;

            } else {
               // If some other exception occurs, rollback the transaction and throw the exception.
               conn.rollback();
               throw e;
            }
         }
      }
   }
}

Connection Pooling

The AWS JDBC Driver for MySQL is compatible with connection pooling, but some connection pooling libraries may contain additional behaviour when dealing with SQL exceptions. This means the exceptions created by the AWS JDBC Driver for MySQL may not be recognized, and depending on the connection pool, connections may be closed prematurely due to the unrecognized SQL exceptions. Users are recommended to investigate the connection pooling library of their choice, and to implement any required additional code to allow the connection pool to accept the exceptions raised by the driver. For example, the library HikariCP has an interface that users can implement to prevent connections from being closed immediately after failover, as seen below.

Sample Code

import com.zaxxer.hikari.SQLExceptionOverride;

import java.sql.SQLException;

public class HikariCPSQLException implements SQLExceptionOverride {
    public Override adjudicate(final SQLException sqlException) {
        String sqlState = sqlException.getSQLState();
        if (sqlState.equalsIgnoreCase("08S02") ||
            sqlState.equalsIgnoreCase("08007")) {
            return Override.DO_NOT_EVICT;
        } else {
            return Override.CONTINUE_EVICT;
        }
    }
}

⚠️ Warnings About Proper Usage of the AWS JDBC Driver for MySQL

1. A common practice when using JDBC drivers is to wrap invocations against a Connection object in a try-catch block, and dispose of the Connection object if an Exception is hit. If your application takes this approach, it will lose the fast-failover functionality offered by the Driver. When failover occurs, the Driver internally establishes a ready-to-use connection inside the original Connection object before throwing an exception to the user. If this Connection object is disposed of, the newly established connection will be thrown away. The correct practice is to check the SQL error code of the exception and reuse the Connection object if the error code indicates successful failover. FailoverSampleApp1 and FailoverSampleApp2 demonstrate this practice. See the section below on Failover Exception Codes for more details.
2. It is highly recommended that you use the cluster and read-only cluster endpoints instead of the direct instance endpoints of your Aurora cluster, unless you are confident about your application's usage of instance endpoints. Although the Driver will correctly failover to the new writer instance when using instance endpoints, use of these endpoints is discouraged because individual instances can spontaneously change reader/writer status when failover occurs. The driver will always connect directly to the instance specified if an instance endpoint is provided, so a write-safe connection cannot be assumed if the application uses instance endpoints.

Enhanced Failure Monitoring

The figure above shows a simplified workflow of Enhanced Failure Monitoring. Enhanced Failure Monitoring is a connection plugin implemented by a monitor thread. The monitor will periodically check the connected database node's health. If a database node is determined to be unhealthy, the query will be retried with a new database node and the monitor restarted.

The Enhanced Failure Monitoring plugin is loaded by default, and can be disabled by setting parameter failureDetectionEnabled to false.

If custom connection plugins are loaded, Enhanced Failure Monitoring and Failover Connection Plugin will NOT be loaded unless explicitly included by adding software.aws.rds.jdbc.mysql.shading.com.mysql.cj.jdbc.ha.plugins.failover.FailoverConnectionPluginFactory,software.aws.rds.jdbc.mysql.shading.com.mysql.cj.jdbc.ha.plugins.NodeMonitoringConnectionPluginFactory to connectionPluginFactories.

Enhanced Failure Monitoring Parameters

failureDetectionTime, failureDetectionInterval, and failureDetectionCount are similar to TCP Keep Alive parameters.

You can include additional monitoring configurations by adding the prefix monitoring- to the configuration key.

Parameter	Value	Required	Description	Default Value
failureDetectionEnabled	Boolean	No	Set to true to enable Enahanced Failure Monitoring. Set to false to disable it. NOTE: In addition to this parameter, since the Enhanced Failure Monitor is implemented with connection plugins, disabling useConnectionPlugins will also disable the Enhanced Failure Monitor functionality. When useConnectionPlugins is enabled, the Enhanced Failure Monitor plugin will be loaded by default regardless of whether failureDetectionEnabled is true or false.	true
failureDetectionTime	Integer	No	Interval in milliseconds between sending a SQL query to the server and the first probe to the database node.	30000
failureDetectionInterval	Integer	No	Interval in milliseconds between probes to database node.	5000
failureDetectionCount	Integer	No	Number of failed connection checks before considering database node as unhealthy.	3
monitorDisposalTime	Integer	No	Interval in milliseconds for a monitor to be considered inactive and to be disposed.	60000

⚠️ Warnings About Usage of the AWS JDBC Driver for MySQL with RDS Proxy

Using RDS Proxy endpoints with AWS JDBC Driver for MySQL with Enhanced Failure Monitoring plugin doesn't cause any critical issue. However such approach isn't recommended. The main reason is that RDS Proxy transparently re-routes driver requests to one of database instances. RDS Proxy decides which database instance is used to based on many criteria and it's on per request basis. Such switching from between different instances makes the plugin useless in terms of instance health monitoring. The plugin couldn't identify what actual instance it's connected to and which one it's monitoring. That could be a source of false positive failure detections. At the same time the plugin can still proactively monitor network connectivity to RDS Proxy endpoints and report outages back to a user application if they occur.

It is suggested to turn off Enhanced Failure Monitoring plugin, or to avoid using RDS Proxy endpoints when the plugin is active.

Experimental Enhanced Failure Monitoring Plugin v2

Warning

This plugin is experimental and users should test the plugin before using it in production environment.

Enhanced Failure Monitoring Plugin v2 is an alternative implementation of enhanced failure monitoring, and it is functionally equal to the Enhanced Failure Monitoring Plugin described above. Both plugins share the same set of configuration parameters. Enhanced Failure Monitoring Plugin v2 plugin is designed to be a drop-in replacement for the Enhanced Failure Monitoring Plugin.

Note

Since these two plugins are separate plugins, users may decide to use them together with a single connection. While this should not have any negative side effects, it is not recommended. It is recommended to use either the Enhanced Failure Monitoring Plugin, or the Enhanced Failure Monitoring Plugin v2 where it's needed.

In order to use Enhanced Failure Monitoring Plugin v2, users should add software.aws.rds.jdbc.mysql.shading.com.mysql.cj.jdbc.ha.plugins.efm2.NodeMonitoringConnectionPluginFactory to connectionPluginFactories.

Enhanced Failure Monitoring Plugin v2 is designed to address some of the issues that have been reported by multiple users. The following changes have been made:

• Used weak pointers to ease garbage collection
• Split monitoring logic into two separate threads to increase overall monitoring stability
• Reviewed locks for monitoring context
• Reviewed and redesigned stopping of idle monitoring threads
• Reviewed and simplified monitoring logic

AWS Secrets Manager Plugin

The AWS JDBC Driver for MySQL supports usage of database credentials stored in the AWS Secrets Manager through the AWS Secrets Manager Plugin. This plugin is optional and can be enabled with the connectionPluginFactories parameter as seen in the connection plugin manager parameters table. When a user creates a new connection with this plugin enabled, the plugin will retrieve the secret and the connection will be created using those credentials.

Note: To use this plugin, you must include the runtime dependencies Jackson Databind and AWS Secrets Manager in your project.

The following properties are required for the AWS Secrets Manager Plugin to retrieve secrets.

Parameter	Value	Required	Description	Example
secretsManagerSecretId	String	Yes	Set this value to be the secret name or the secret ARN.	test-secret-id
secretsManagerRegion	String	Yes	Set this value to be the region your secret is in.	us-east-1

Example

import java.sql.*;
import java.util.Properties;
import software.aws.rds.jdbc.mysql.shading.com.mysql.cj.jdbc.ha.plugins.AWSSecretsManagerPluginFactory;

public class AWSSecretsManagerPluginSample {

   private static final String CONNECTION_STRING = "jdbc:mysql:aws://db-identifier.cluster-XYZ.us-east-2.rds.amazonaws.com:3306/employees";
   private static final String SECRET_ID = "secretId";
   private static final String REGION = "us-east-1";

   public static void main(String[] args) throws SQLException {
      final Properties properties = new Properties();
      // Enable the AWS Secrets Manager Plugin:
      properties.setProperty("connectionPluginFactories", AWSSecretsManagerPluginFactory.class.getName());
      
      // Set these properties so secrets can be retrieved:
      properties.setProperty("secretsManagerSecretId", SECRET_ID);
      properties.setProperty("secretsManagerRegion", REGION);

      // Try and make a connection:
      try (final Connection conn = DriverManager.getConnection(CONNECTION_STRING, properties);
           final Statement statement = conn.createStatement();
           final ResultSet rs = statement.executeQuery("SELECT * FROM employees")) {
         while (rs.next()) {
            System.out.println(rs.getString("first_name"));
         }
      }
   }
}

Reader Cluster Connection Plugin

When connecting to an Amazon Aurora database using the reader endpoint, the endpoint will load balance connections between all the available Aurora Replicas. In situations where the AWS JDBC Driver for MySQL needs to create a new connection internally, the new connection may or may not be to the same instance the original connection was made to. This means any processes that require the same instance will result in errors. For example, setting query timeouts may result in errors due to the kill query being sent to the incorrect instance. In these cases, the Reader Cluster Connection Plugin can be used to ensure all new connections are made to the same reader.

The Reader Cluster Connection Plugin is not enabled by default and can be enabled by using the connectionPluginFactories.

Extra Additions

XML Entity Injection Fix

The default XML parser contained a security risk which made the driver prone to XML Entity Injection (XXE) attacks. To solve this issue, we disabled Document Type Definitions (DTDs) in the XML parser. If you require this restriction to be lifted in your application, you can set the allowXmlUnsafeExternalEntity parameter in the connection string to true. Please see the table below for a definition of this parameter.

Parameter	Value	Required	Description	Default Value
allowXmlUnsafeExternalEntity	Boolean	No	Set to true if you would like to use XML inputs that refer to external entities. WARNING: Setting this to true is unsafe since your system to be prone to XXE attacks.	false

AWS IAM Database Authentication

Note: To preserve compatibility with customers using the community driver, IAM Authentication requires the AWS Java SDK RDS v2.x to be included separately in the classpath. The AWS Java SDK RDS is a runtime dependency and must be resolved.

The driver supports Amazon AWS Identity and Access Management (IAM) authentication. When using AWS IAM database authentication, the host URL must be a valid Amazon endpoint, and not a custom domain or an IP address.
ie. db-identifier.cluster-XYZ.us-east-2.rds.amazonaws.com

IAM database authentication use is limited to certain database engines. For more information on limitations and recommendations, please review the IAM documentation.

Setup for IAM database Authentication for MySQL

1. Turn on AWS IAM database authentication for the existing database or create a new database on the AWS RDS Console:
   1. If needed, review the documentation about creating a new database.
   2. If needed, review the documentation about modifying an existing database.
2. Create/Change and use an AWS IAM policy for AWS IAM database authentication.
3. Create a database account using AWS IAM database authentication:
   1. Connect to your MySQL database using master logins, and use the following command to create a new user:
      CREATE USER example_user_name IDENTIFIED WITH AWSAuthenticationPlugin AS 'RDS';

Parameter	Value	Required	Description	Default Value
useAwsIam	Boolean	No	Set to true to enable AWS IAM database authentication	false

Sample Code

import java.sql.*;
import java.util.Properties;

public class AwsIamAuthenticationSample {

   private static final String CONNECTION_STRING = "jdbc:mysql:aws://db-identifier.cluster-XYZ.us-east-2.rds.amazonaws.com:3306/employees";
   private static final String USER = "username";

   public static void main(String[] args) throws SQLException {
      final Properties properties = new Properties();
      // Enable AWS IAM database authentication
      properties.setProperty("useAwsIam", "true");
      properties.setProperty("user", USER);

      // Try and make a connection
      try (final Connection conn = DriverManager.getConnection(CONNECTION_STRING, properties);
           final Statement statement = conn.createStatement();
           final ResultSet rs = statement.executeQuery("SELECT * FROM employees")) {
         while (rs.next()) {
            System.out.println(rs.getString("first_name"));
         }
      }
   }
}

Development

Setup

After installing Amazon Corretto or Java as directed in the prerequisites section, use the following command to clone the driver repository:

$ git clone https://github.com/awslabs/aws-mysql-jdbc.git
$ cd aws-mysql-jdbc

You can now make changes in the repository.

Building the AWS JDBC Driver for MySQL

To build the AWS JDBC Driver, navigate into the aws-mysql-jdbc directory and run the following command:

gradlew build

To build the driver without running the tests, run the following command:

gradlew build -x test

Running the Tests

To run the tests, you must first install Docker. After building the driver, and installing and configuring Docker, you can run the tests in the aws-mysql-jdbc directory with the following command:

gradlew test

To run tests for the base driver functionality, use the following command:

gradlew test-community-docker

To run the integration tests, you will need some environment variables and an AWS User. Integration tests are set up to create clusters for each test. The AWS User will need access to do the following: create/delete Aurora clusters for testing, AWS IAM access for RDS, and allowlisting IP address of the current runner in EC2 Security Group. Descriptions of the necessary environment variables is in the table below.

To run the integration tests on macOS, use the following command (replace the variables with the appropriate values):

AWS_ACCESS_KEY_ID=ASIAIOSFODNN7EXAMPLE AWS_SECRET_ACCESS_KEY=wJalrXUtnFEMI/K7MDENG/bPxRfiCYEXAMPLEKEY AWS_SESSION_TOKEN=AQoDYXdzEJr...<remainder of session token> ./gradlew test-integration-docker

To run the integration tests on Windows, use the following command (replace the variables with the appropriate values):

cmd /c "SET AWS_ACCESS_KEY_ID=ASIAIOSFODNN7EXAMPLE & SET AWS_SECRET_ACCESS_KEY=wJalrXUtnFEMI/K7MDENG/bPxRfiCYEXAMPLEKEY & SET AWS_SESSION_TOKEN=AQoDYXdzEJr...<remainder of session token> .\gradlew test-integration-docker

Environment Variables

Environment Variable	Required	Description	Example Value
AWS_ACCESS_KEY_ID	Yes	Access keys for CLI, SDK, & API access	ASIAIOSFODNN7EXAMPLE
AWS_SECRET_ACCESS_KEY	Yes	Secret Access keys for CLI, SDK, & API access	wJalrXUtnFEMI/K7MDENG/bPxRfiCYEXAMPLEKEY
AWS_SESSION_TOKEN	Required if using temporary AWS credentials.	AWS Session Token for CLI, SDK, & API access.	AQoDYXdzEJr...
TEST_DB_CLUSTER_IDENTIFIER	No, but suggested to set	The database identifier for your Aurora cluster. It is suggested to have this set to avoid conflicting with existing clusters.	db-identifier
TEST_USERNAME	No	The username to access the database.	username
TEST_PASSWORD	No	The database cluster password.	password
TEST_DB_USER	No	User within the database that is identified with AWS IAM database authentication. This is used for AWS IAM authentication.	jane_doe

Enable Logging

Enable logging by specifying the logger parameter in the connection string like the following:

jdbc:mysql:aws://database.cluster-xyz.us-east-2.rds.amazonaws.com/dbnname?logger=StandardLogger

For more information on the configuration parameter, see Debugging/Profiling. The driver currently does not support custom logging outside the usual logging frameworks like SLF4J. For more information on using SLF4J with the driver see here.

Known Limitations

Please note that as mentioned in the maintenance policy, there will not be any new feature work for the AWS JDBC Driver for MySQL. All new feature development will be targeted towards the AWS JDBC Driver, which can be used in place of the AWS JDBC Driver for MySQL. A migration guide containing instructions on how to transition from the AWS JDBC Driver for MySQL to the AWS JDBC Driver can be found here. We encourage you to check out the AWS JDBC Driver documentation and to consider whether it would be suitable for your needs.

Amazon RDS Blue/Green Deployments

This driver does not support Amazon RDS Blue/Green Deployments, and they should be avoided. Executing a Blue/Green deployment with the driver will disconnect the driver from the database, and it will be unable to re-establish a connection to an available database instance.

Amazon Aurora Global Databases

This driver does not support Amazon Aurora Global Databases. While it is possible to connect to global databases, failing over to a secondary cluster will result in errors and there may be additional unforeseen errors when working with global databases.

SSLHandshakeException

Using the driver with JDKs based on OpenJDK 8u292+ or OpenJDK 11.0.11+ will result in an exception: SSLHandshakeException: No appropriate protocol. This is due to OpenJDK disabling TLS 1.0 and 1.1 availability in security.properties. For additional information see "Disable TLS 1.0 and TLS 1.1". To resolve this exception, add the enabledTLSProtocols=TLSv1.2 connection property when connecting to a database.

Read-Write Splitting

The driver does not support read-write splitting yet. A possible solution for now is to utilize multiple connection pools. One can send write traffic to a connection pool connected to the writer cluster endpoint, and send read-only traffic to another pool connected to the reader cluster endpoint.

Password Expiration With AWS Secrets Manager

When using the driver with AWS Secrets Manager, the driver does not automatically update expired credentials during failover. The driver only handles expired credentials when opening new connections. If the credentials expire during failover, the driver raises a SQLException with SQLState 28000 to the client application. A possible solution to handle password expiration during failover is to catch SQLException with SQLState 28000 and create a new connection.

import java.sql.*;
import java.util.Properties;
import software.aws.rds.jdbc.mysql.shading.com.mysql.cj.jdbc.ha.plugins.AWSSecretsManagerPluginFactory;
import software.aws.rds.jdbc.mysql.shading.com.mysql.cj.jdbc.ha.plugins.failover.FailoverConnectionPluginFactory;
import software.aws.rds.jdbc.mysql.shading.com.mysql.cj.jdbc.ha.plugins.NodeMonitoringConnectionPluginFactory;
import com.mysql.cj.log.StandardLogger;

public class AWSSecretsManagerPluginSample2 {

   private static final String CONNECTION_STRING = "jdbc:mysql:aws://db-identifier.cluster-XYZ.us-east-2.rds.amazonaws.com:3306/employees";
   private static final String SECRET_ID = "secretId";
   private static final String REGION = "us-east-1";
   private static final int MAX_RETRIES = 5;

   public static void main(String[] args) throws SQLException {
      final Properties properties = new Properties();
      properties.setProperty("logger", StandardLogger.class.getName());

      // Enable the AWS Secrets Manager Plugin:
      properties.setProperty(
              "connectionPluginFactories",
              String.format("%s,%s,%s",
                      AWSSecretsManagerPluginFactory.class.getName(),
                      FailoverConnectionPluginFactory.class.getName(),
                      NodeMonitoringConnectionPluginFactory.class.getName())
      );

      // Set these properties so secrets can be retrieved:
      properties.setProperty("secretsManagerSecretId", SECRET_ID);
      properties.setProperty("secretsManagerRegion", REGION);

      try (ResultSet rs = executeQueryWithPasswordExpirationHandling("SELECT * FROM employees", properties)) {
         while (rs.next()) {
            System.out.println(rs.getString("first_name"));
         }
      }
   }

   private static ResultSet executeQueryWithPasswordExpirationHandling(
           String query,
           Properties properties) throws SQLException {
      int retries = 0;
      boolean reconnect = false;
      Connection connection = null;

      while (true) {
         try {
            if (connection == null || reconnect) {
               connection = DriverManager.getConnection(CONNECTION_STRING, properties);
            }
            Statement statement = connection.createStatement();
            return statement.executeQuery(query);
         } catch (SQLException e) {
            // If the attempt to connect has failed MAX_RETRIES times,
            // throw the exception to inform users of the failed connection.
            if (retries > MAX_RETRIES) {
               throw e;
            }

            if ("28000".equalsIgnoreCase(e.getSQLState())) {
               // Failover has occurred and failed due to access denied error.
               // Create a new connection and re-execute the query.
               reconnect = true;
               retries++;
            } else if ("08S02".equalsIgnoreCase(e.getSQLState())) {
               // Failover has occurred and the driver has failed over to another instance successfully.
               // Re-execute the query.
               retries++;
            } else {
               throw e;
            }
         }
      }
   }
}

Getting Help and Opening Issues

If you encounter a bug with the AWS JDBC Driver for MySQL, we would like to hear about it. Please search the existing issues and see if others are also experiencing the issue before opening a new issue. When opening a new issue, we will need the version of AWS JDBC Driver for MySQL, Java language version, OS you’re using, and the MySQL database version you're running against. Please include a reproduction case for the issue when appropriate.

The GitHub issues are intended for bug reports and feature requests. Keeping the list of open issues lean will help us respond in a timely manner.

Releases

The AWS JDBC Driver for MySQL has a regular monthly release cadence. A new release will occur during the last week of each month. However, if there are no changes since the latest release, then a release will not occur. The full release schedule and maintenance policy can be found here.

Aurora Engine Version Testing

The aws-mysql-jdbc driver is being tested against the following Community and Aurora database versions in our test suite:

Database	Versions
MySQL	8.0.21
Aurora MySQL	MySQL 5.7.mysql_aurora.2.11.2 (Wire-compatible with MySQL 5.7 onwards. For more details, see here.)

The aws-mysql-jdbc driver is compatible with MySQL 5.7 andMySQL 8.0 as per the Community MySQL Connector/J 8.0 Driver.

Documentation

For additional documentation on the AWS JDBC Driver, please refer to the documentation for the open-source mysql-connector-j driver that the AWS JDBC Driver is based on.

License

This software is released under version 2 of the GNU General Public License (GPLv2).