All URIs are relative to http://localhost/api/v1
| Method | HTTP request | Description |
|---|---|---|
| issue_add_label | POST /repos/{owner}/{repo}/issues/{index}/labels | Add a label to an issue |
| issue_add_subscription | PUT /repos/{owner}/{repo}/issues/{index}/subscriptions/{user} | Subscribe user to issue |
| issue_add_time | POST /repos/{owner}/{repo}/issues/{index}/times | Add tracked time to a issue |
| issue_check_subscription | GET /repos/{owner}/{repo}/issues/{index}/subscriptions/check | Check if user is subscribed to an issue |
| issue_clear_labels | DELETE /repos/{owner}/{repo}/issues/{index}/labels | Remove all labels from an issue |
| issue_create_comment | POST /repos/{owner}/{repo}/issues/{index}/comments | Add a comment to an issue |
| issue_create_issue | POST /repos/{owner}/{repo}/issues | Create an issue. If using deadline only the date will be taken into account, and time of day ignored. |
| issue_create_label | POST /repos/{owner}/{repo}/labels | Create a label |
| issue_create_milestone | POST /repos/{owner}/{repo}/milestones | Create a milestone |
| issue_delete_comment | DELETE /repos/{owner}/{repo}/issues/comments/{id} | Delete a comment |
| issue_delete_comment_deprecated | DELETE /repos/{owner}/{repo}/issues/{index}/comments/{id} | Delete a comment |
| issue_delete_comment_reaction | DELETE /repos/{owner}/{repo}/issues/comments/{id}/reactions | Remove a reaction from a comment of an issue |
| issue_delete_issue_reaction | DELETE /repos/{owner}/{repo}/issues/{index}/reactions | Remove a reaction from an issue |
| issue_delete_label | DELETE /repos/{owner}/{repo}/labels/{id} | Delete a label |
| issue_delete_milestone | DELETE /repos/{owner}/{repo}/milestones/{id} | Delete a milestone |
| issue_delete_stop_watch | DELETE /repos/{owner}/{repo}/issues/{index}/stopwatch/delete | Delete an issue's existing stopwatch. |
| issue_delete_subscription | DELETE /repos/{owner}/{repo}/issues/{index}/subscriptions/{user} | Unsubscribe user from issue |
| issue_delete_time | DELETE /repos/{owner}/{repo}/issues/{index}/times/{id} | Delete specific tracked time |
| issue_edit_comment | PATCH /repos/{owner}/{repo}/issues/comments/{id} | Edit a comment |
| issue_edit_comment_deprecated | PATCH /repos/{owner}/{repo}/issues/{index}/comments/{id} | Edit a comment |
| issue_edit_issue | PATCH /repos/{owner}/{repo}/issues/{index} | Edit an issue. If using deadline only the date will be taken into account, and time of day ignored. |
| issue_edit_issue_deadline | POST /repos/{owner}/{repo}/issues/{index}/deadline | Set an issue deadline. If set to null, the deadline is deleted. If using deadline only the date will be taken into account, and time of day ignored. |
| issue_edit_label | PATCH /repos/{owner}/{repo}/labels/{id} | Update a label |
| issue_edit_milestone | PATCH /repos/{owner}/{repo}/milestones/{id} | Update a milestone |
| issue_get_comment | GET /repos/{owner}/{repo}/issues/comments/{id} | Get a comment |
| issue_get_comment_reactions | GET /repos/{owner}/{repo}/issues/comments/{id}/reactions | Get a list of reactions from a comment of an issue |
| issue_get_comments | GET /repos/{owner}/{repo}/issues/{index}/comments | List all comments on an issue |
| issue_get_issue | GET /repos/{owner}/{repo}/issues/{index} | Get an issue |
| issue_get_issue_reactions | GET /repos/{owner}/{repo}/issues/{index}/reactions | Get a list reactions of an issue |
| issue_get_label | GET /repos/{owner}/{repo}/labels/{id} | Get a single label |
| issue_get_labels | GET /repos/{owner}/{repo}/issues/{index}/labels | Get an issue's labels |
| issue_get_milestone | GET /repos/{owner}/{repo}/milestones/{id} | Get a milestone |
| issue_get_milestones_list | GET /repos/{owner}/{repo}/milestones | Get all of a repository's opened milestones |
| issue_get_repo_comments | GET /repos/{owner}/{repo}/issues/comments | List all comments in a repository |
| issue_list_issues | GET /repos/{owner}/{repo}/issues | List a repository's issues |
| issue_list_labels | GET /repos/{owner}/{repo}/labels | Get all of a repository's labels |
| issue_post_comment_reaction | POST /repos/{owner}/{repo}/issues/comments/{id}/reactions | Add a reaction to a comment of an issue |
| issue_post_issue_reaction | POST /repos/{owner}/{repo}/issues/{index}/reactions | Add a reaction to an issue |
| issue_remove_label | DELETE /repos/{owner}/{repo}/issues/{index}/labels/{id} | Remove a label from an issue |
| issue_replace_labels | PUT /repos/{owner}/{repo}/issues/{index}/labels | Replace an issue's labels |
| issue_reset_time | DELETE /repos/{owner}/{repo}/issues/{index}/times | Reset a tracked time of an issue |
| issue_search_issues | GET /repos/issues/search | Search for issues across the repositories that the user has access to |
| issue_start_stop_watch | POST /repos/{owner}/{repo}/issues/{index}/stopwatch/start | Start stopwatch on an issue. |
| issue_stop_stop_watch | POST /repos/{owner}/{repo}/issues/{index}/stopwatch/stop | Stop an issue's existing stopwatch. |
| issue_subscriptions | GET /repos/{owner}/{repo}/issues/{index}/subscriptions | Get users who subscribed on an issue. |
| issue_tracked_times | GET /repos/{owner}/{repo}/issues/{index}/times | List an issue's tracked times |
list[Label] issue_add_label(owner, repo, index, body=body)
Add a label to an issue
from __future__ import print_function
import time
import gitea_api
from gitea_api.rest import ApiException
from pprint import pprint
# Configure API key authorization: AccessToken
configuration = gitea_api.Configuration()
configuration.api_key['access_token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['access_token'] = 'Bearer'
# Configure API key authorization: AuthorizationHeaderToken
configuration = gitea_api.Configuration()
configuration.api_key['Authorization'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Authorization'] = 'Bearer'
# Configure HTTP basic authorization: BasicAuth
configuration = gitea_api.Configuration()
configuration.username = 'YOUR_USERNAME'
configuration.password = 'YOUR_PASSWORD'
# Configure API key authorization: SudoHeader
configuration = gitea_api.Configuration()
configuration.api_key['Sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Sudo'] = 'Bearer'
# Configure API key authorization: SudoParam
configuration = gitea_api.Configuration()
configuration.api_key['sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['sudo'] = 'Bearer'
# Configure API key authorization: TOTPHeader
configuration = gitea_api.Configuration()
configuration.api_key['X-GITEA-OTP'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['X-GITEA-OTP'] = 'Bearer'
# Configure API key authorization: Token
configuration = gitea_api.Configuration()
configuration.api_key['token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['token'] = 'Bearer'
# create an instance of the API class
api_instance = gitea_api.IssueApi(gitea_api.ApiClient(configuration))
owner = 'owner_example' # str | owner of the repo
repo = 'repo_example' # str | name of the repo
index = 789 # int | index of the issue
body = gitea_api.IssueLabelsOption() # IssueLabelsOption | (optional)
try:
# Add a label to an issue
api_response = api_instance.issue_add_label(owner, repo, index, body=body)
pprint(api_response)
except ApiException as e:
print("Exception when calling IssueApi->issue_add_label: %s\n" % e)| Name | Type | Description | Notes |
|---|---|---|---|
| owner | str | owner of the repo | |
| repo | str | name of the repo | |
| index | int | index of the issue | |
| body | IssueLabelsOption | [optional] |
AccessToken, AuthorizationHeaderToken, BasicAuth, SudoHeader, SudoParam, TOTPHeader, Token
- Content-Type: application/json
- Accept: application/json
[Back to top] [Back to API list] [Back to Model list] [Back to README]
issue_add_subscription(owner, repo, index, user)
Subscribe user to issue
from __future__ import print_function
import time
import gitea_api
from gitea_api.rest import ApiException
from pprint import pprint
# Configure API key authorization: AccessToken
configuration = gitea_api.Configuration()
configuration.api_key['access_token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['access_token'] = 'Bearer'
# Configure API key authorization: AuthorizationHeaderToken
configuration = gitea_api.Configuration()
configuration.api_key['Authorization'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Authorization'] = 'Bearer'
# Configure HTTP basic authorization: BasicAuth
configuration = gitea_api.Configuration()
configuration.username = 'YOUR_USERNAME'
configuration.password = 'YOUR_PASSWORD'
# Configure API key authorization: SudoHeader
configuration = gitea_api.Configuration()
configuration.api_key['Sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Sudo'] = 'Bearer'
# Configure API key authorization: SudoParam
configuration = gitea_api.Configuration()
configuration.api_key['sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['sudo'] = 'Bearer'
# Configure API key authorization: TOTPHeader
configuration = gitea_api.Configuration()
configuration.api_key['X-GITEA-OTP'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['X-GITEA-OTP'] = 'Bearer'
# Configure API key authorization: Token
configuration = gitea_api.Configuration()
configuration.api_key['token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['token'] = 'Bearer'
# create an instance of the API class
api_instance = gitea_api.IssueApi(gitea_api.ApiClient(configuration))
owner = 'owner_example' # str | owner of the repo
repo = 'repo_example' # str | name of the repo
index = 789 # int | index of the issue
user = 'user_example' # str | user to subscribe
try:
# Subscribe user to issue
api_instance.issue_add_subscription(owner, repo, index, user)
except ApiException as e:
print("Exception when calling IssueApi->issue_add_subscription: %s\n" % e)| Name | Type | Description | Notes |
|---|---|---|---|
| owner | str | owner of the repo | |
| repo | str | name of the repo | |
| index | int | index of the issue | |
| user | str | user to subscribe |
void (empty response body)
AccessToken, AuthorizationHeaderToken, BasicAuth, SudoHeader, SudoParam, TOTPHeader, Token
- Content-Type: application/json
- Accept: application/json
[Back to top] [Back to API list] [Back to Model list] [Back to README]
TrackedTime issue_add_time(owner, repo, index, body=body)
Add tracked time to a issue
from __future__ import print_function
import time
import gitea_api
from gitea_api.rest import ApiException
from pprint import pprint
# Configure API key authorization: AccessToken
configuration = gitea_api.Configuration()
configuration.api_key['access_token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['access_token'] = 'Bearer'
# Configure API key authorization: AuthorizationHeaderToken
configuration = gitea_api.Configuration()
configuration.api_key['Authorization'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Authorization'] = 'Bearer'
# Configure HTTP basic authorization: BasicAuth
configuration = gitea_api.Configuration()
configuration.username = 'YOUR_USERNAME'
configuration.password = 'YOUR_PASSWORD'
# Configure API key authorization: SudoHeader
configuration = gitea_api.Configuration()
configuration.api_key['Sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Sudo'] = 'Bearer'
# Configure API key authorization: SudoParam
configuration = gitea_api.Configuration()
configuration.api_key['sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['sudo'] = 'Bearer'
# Configure API key authorization: TOTPHeader
configuration = gitea_api.Configuration()
configuration.api_key['X-GITEA-OTP'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['X-GITEA-OTP'] = 'Bearer'
# Configure API key authorization: Token
configuration = gitea_api.Configuration()
configuration.api_key['token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['token'] = 'Bearer'
# create an instance of the API class
api_instance = gitea_api.IssueApi(gitea_api.ApiClient(configuration))
owner = 'owner_example' # str | owner of the repo
repo = 'repo_example' # str | name of the repo
index = 789 # int | index of the issue
body = gitea_api.AddTimeOption() # AddTimeOption | (optional)
try:
# Add tracked time to a issue
api_response = api_instance.issue_add_time(owner, repo, index, body=body)
pprint(api_response)
except ApiException as e:
print("Exception when calling IssueApi->issue_add_time: %s\n" % e)| Name | Type | Description | Notes |
|---|---|---|---|
| owner | str | owner of the repo | |
| repo | str | name of the repo | |
| index | int | index of the issue | |
| body | AddTimeOption | [optional] |
AccessToken, AuthorizationHeaderToken, BasicAuth, SudoHeader, SudoParam, TOTPHeader, Token
- Content-Type: application/json
- Accept: application/json
[Back to top] [Back to API list] [Back to Model list] [Back to README]
WatchInfo issue_check_subscription(owner, repo, index)
Check if user is subscribed to an issue
from __future__ import print_function
import time
import gitea_api
from gitea_api.rest import ApiException
from pprint import pprint
# Configure API key authorization: AccessToken
configuration = gitea_api.Configuration()
configuration.api_key['access_token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['access_token'] = 'Bearer'
# Configure API key authorization: AuthorizationHeaderToken
configuration = gitea_api.Configuration()
configuration.api_key['Authorization'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Authorization'] = 'Bearer'
# Configure HTTP basic authorization: BasicAuth
configuration = gitea_api.Configuration()
configuration.username = 'YOUR_USERNAME'
configuration.password = 'YOUR_PASSWORD'
# Configure API key authorization: SudoHeader
configuration = gitea_api.Configuration()
configuration.api_key['Sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Sudo'] = 'Bearer'
# Configure API key authorization: SudoParam
configuration = gitea_api.Configuration()
configuration.api_key['sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['sudo'] = 'Bearer'
# Configure API key authorization: TOTPHeader
configuration = gitea_api.Configuration()
configuration.api_key['X-GITEA-OTP'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['X-GITEA-OTP'] = 'Bearer'
# Configure API key authorization: Token
configuration = gitea_api.Configuration()
configuration.api_key['token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['token'] = 'Bearer'
# create an instance of the API class
api_instance = gitea_api.IssueApi(gitea_api.ApiClient(configuration))
owner = 'owner_example' # str | owner of the repo
repo = 'repo_example' # str | name of the repo
index = 789 # int | index of the issue
try:
# Check if user is subscribed to an issue
api_response = api_instance.issue_check_subscription(owner, repo, index)
pprint(api_response)
except ApiException as e:
print("Exception when calling IssueApi->issue_check_subscription: %s\n" % e)| Name | Type | Description | Notes |
|---|---|---|---|
| owner | str | owner of the repo | |
| repo | str | name of the repo | |
| index | int | index of the issue |
AccessToken, AuthorizationHeaderToken, BasicAuth, SudoHeader, SudoParam, TOTPHeader, Token
- Content-Type: application/json
- Accept: application/json
[Back to top] [Back to API list] [Back to Model list] [Back to README]
issue_clear_labels(owner, repo, index)
Remove all labels from an issue
from __future__ import print_function
import time
import gitea_api
from gitea_api.rest import ApiException
from pprint import pprint
# Configure API key authorization: AccessToken
configuration = gitea_api.Configuration()
configuration.api_key['access_token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['access_token'] = 'Bearer'
# Configure API key authorization: AuthorizationHeaderToken
configuration = gitea_api.Configuration()
configuration.api_key['Authorization'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Authorization'] = 'Bearer'
# Configure HTTP basic authorization: BasicAuth
configuration = gitea_api.Configuration()
configuration.username = 'YOUR_USERNAME'
configuration.password = 'YOUR_PASSWORD'
# Configure API key authorization: SudoHeader
configuration = gitea_api.Configuration()
configuration.api_key['Sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Sudo'] = 'Bearer'
# Configure API key authorization: SudoParam
configuration = gitea_api.Configuration()
configuration.api_key['sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['sudo'] = 'Bearer'
# Configure API key authorization: TOTPHeader
configuration = gitea_api.Configuration()
configuration.api_key['X-GITEA-OTP'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['X-GITEA-OTP'] = 'Bearer'
# Configure API key authorization: Token
configuration = gitea_api.Configuration()
configuration.api_key['token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['token'] = 'Bearer'
# create an instance of the API class
api_instance = gitea_api.IssueApi(gitea_api.ApiClient(configuration))
owner = 'owner_example' # str | owner of the repo
repo = 'repo_example' # str | name of the repo
index = 789 # int | index of the issue
try:
# Remove all labels from an issue
api_instance.issue_clear_labels(owner, repo, index)
except ApiException as e:
print("Exception when calling IssueApi->issue_clear_labels: %s\n" % e)| Name | Type | Description | Notes |
|---|---|---|---|
| owner | str | owner of the repo | |
| repo | str | name of the repo | |
| index | int | index of the issue |
void (empty response body)
AccessToken, AuthorizationHeaderToken, BasicAuth, SudoHeader, SudoParam, TOTPHeader, Token
- Content-Type: application/json, text/plain
- Accept: application/json
[Back to top] [Back to API list] [Back to Model list] [Back to README]
Comment issue_create_comment(owner, repo, index, body=body)
Add a comment to an issue
from __future__ import print_function
import time
import gitea_api
from gitea_api.rest import ApiException
from pprint import pprint
# Configure API key authorization: AccessToken
configuration = gitea_api.Configuration()
configuration.api_key['access_token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['access_token'] = 'Bearer'
# Configure API key authorization: AuthorizationHeaderToken
configuration = gitea_api.Configuration()
configuration.api_key['Authorization'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Authorization'] = 'Bearer'
# Configure HTTP basic authorization: BasicAuth
configuration = gitea_api.Configuration()
configuration.username = 'YOUR_USERNAME'
configuration.password = 'YOUR_PASSWORD'
# Configure API key authorization: SudoHeader
configuration = gitea_api.Configuration()
configuration.api_key['Sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Sudo'] = 'Bearer'
# Configure API key authorization: SudoParam
configuration = gitea_api.Configuration()
configuration.api_key['sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['sudo'] = 'Bearer'
# Configure API key authorization: TOTPHeader
configuration = gitea_api.Configuration()
configuration.api_key['X-GITEA-OTP'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['X-GITEA-OTP'] = 'Bearer'
# Configure API key authorization: Token
configuration = gitea_api.Configuration()
configuration.api_key['token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['token'] = 'Bearer'
# create an instance of the API class
api_instance = gitea_api.IssueApi(gitea_api.ApiClient(configuration))
owner = 'owner_example' # str | owner of the repo
repo = 'repo_example' # str | name of the repo
index = 789 # int | index of the issue
body = gitea_api.CreateIssueCommentOption() # CreateIssueCommentOption | (optional)
try:
# Add a comment to an issue
api_response = api_instance.issue_create_comment(owner, repo, index, body=body)
pprint(api_response)
except ApiException as e:
print("Exception when calling IssueApi->issue_create_comment: %s\n" % e)| Name | Type | Description | Notes |
|---|---|---|---|
| owner | str | owner of the repo | |
| repo | str | name of the repo | |
| index | int | index of the issue | |
| body | CreateIssueCommentOption | [optional] |
AccessToken, AuthorizationHeaderToken, BasicAuth, SudoHeader, SudoParam, TOTPHeader, Token
- Content-Type: application/json
- Accept: application/json
[Back to top] [Back to API list] [Back to Model list] [Back to README]
Issue issue_create_issue(owner, repo, body=body)
Create an issue. If using deadline only the date will be taken into account, and time of day ignored.
from __future__ import print_function
import time
import gitea_api
from gitea_api.rest import ApiException
from pprint import pprint
# Configure API key authorization: AccessToken
configuration = gitea_api.Configuration()
configuration.api_key['access_token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['access_token'] = 'Bearer'
# Configure API key authorization: AuthorizationHeaderToken
configuration = gitea_api.Configuration()
configuration.api_key['Authorization'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Authorization'] = 'Bearer'
# Configure HTTP basic authorization: BasicAuth
configuration = gitea_api.Configuration()
configuration.username = 'YOUR_USERNAME'
configuration.password = 'YOUR_PASSWORD'
# Configure API key authorization: SudoHeader
configuration = gitea_api.Configuration()
configuration.api_key['Sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Sudo'] = 'Bearer'
# Configure API key authorization: SudoParam
configuration = gitea_api.Configuration()
configuration.api_key['sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['sudo'] = 'Bearer'
# Configure API key authorization: TOTPHeader
configuration = gitea_api.Configuration()
configuration.api_key['X-GITEA-OTP'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['X-GITEA-OTP'] = 'Bearer'
# Configure API key authorization: Token
configuration = gitea_api.Configuration()
configuration.api_key['token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['token'] = 'Bearer'
# create an instance of the API class
api_instance = gitea_api.IssueApi(gitea_api.ApiClient(configuration))
owner = 'owner_example' # str | owner of the repo
repo = 'repo_example' # str | name of the repo
body = gitea_api.CreateIssueOption() # CreateIssueOption | (optional)
try:
# Create an issue. If using deadline only the date will be taken into account, and time of day ignored.
api_response = api_instance.issue_create_issue(owner, repo, body=body)
pprint(api_response)
except ApiException as e:
print("Exception when calling IssueApi->issue_create_issue: %s\n" % e)| Name | Type | Description | Notes |
|---|---|---|---|
| owner | str | owner of the repo | |
| repo | str | name of the repo | |
| body | CreateIssueOption | [optional] |
AccessToken, AuthorizationHeaderToken, BasicAuth, SudoHeader, SudoParam, TOTPHeader, Token
- Content-Type: application/json
- Accept: application/json
[Back to top] [Back to API list] [Back to Model list] [Back to README]
Label issue_create_label(owner, repo, body=body)
Create a label
from __future__ import print_function
import time
import gitea_api
from gitea_api.rest import ApiException
from pprint import pprint
# Configure API key authorization: AccessToken
configuration = gitea_api.Configuration()
configuration.api_key['access_token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['access_token'] = 'Bearer'
# Configure API key authorization: AuthorizationHeaderToken
configuration = gitea_api.Configuration()
configuration.api_key['Authorization'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Authorization'] = 'Bearer'
# Configure HTTP basic authorization: BasicAuth
configuration = gitea_api.Configuration()
configuration.username = 'YOUR_USERNAME'
configuration.password = 'YOUR_PASSWORD'
# Configure API key authorization: SudoHeader
configuration = gitea_api.Configuration()
configuration.api_key['Sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Sudo'] = 'Bearer'
# Configure API key authorization: SudoParam
configuration = gitea_api.Configuration()
configuration.api_key['sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['sudo'] = 'Bearer'
# Configure API key authorization: TOTPHeader
configuration = gitea_api.Configuration()
configuration.api_key['X-GITEA-OTP'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['X-GITEA-OTP'] = 'Bearer'
# Configure API key authorization: Token
configuration = gitea_api.Configuration()
configuration.api_key['token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['token'] = 'Bearer'
# create an instance of the API class
api_instance = gitea_api.IssueApi(gitea_api.ApiClient(configuration))
owner = 'owner_example' # str | owner of the repo
repo = 'repo_example' # str | name of the repo
body = gitea_api.CreateLabelOption() # CreateLabelOption | (optional)
try:
# Create a label
api_response = api_instance.issue_create_label(owner, repo, body=body)
pprint(api_response)
except ApiException as e:
print("Exception when calling IssueApi->issue_create_label: %s\n" % e)| Name | Type | Description | Notes |
|---|---|---|---|
| owner | str | owner of the repo | |
| repo | str | name of the repo | |
| body | CreateLabelOption | [optional] |
AccessToken, AuthorizationHeaderToken, BasicAuth, SudoHeader, SudoParam, TOTPHeader, Token
- Content-Type: application/json
- Accept: application/json
[Back to top] [Back to API list] [Back to Model list] [Back to README]
Milestone issue_create_milestone(owner, repo, body=body)
Create a milestone
from __future__ import print_function
import time
import gitea_api
from gitea_api.rest import ApiException
from pprint import pprint
# Configure API key authorization: AccessToken
configuration = gitea_api.Configuration()
configuration.api_key['access_token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['access_token'] = 'Bearer'
# Configure API key authorization: AuthorizationHeaderToken
configuration = gitea_api.Configuration()
configuration.api_key['Authorization'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Authorization'] = 'Bearer'
# Configure HTTP basic authorization: BasicAuth
configuration = gitea_api.Configuration()
configuration.username = 'YOUR_USERNAME'
configuration.password = 'YOUR_PASSWORD'
# Configure API key authorization: SudoHeader
configuration = gitea_api.Configuration()
configuration.api_key['Sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Sudo'] = 'Bearer'
# Configure API key authorization: SudoParam
configuration = gitea_api.Configuration()
configuration.api_key['sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['sudo'] = 'Bearer'
# Configure API key authorization: TOTPHeader
configuration = gitea_api.Configuration()
configuration.api_key['X-GITEA-OTP'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['X-GITEA-OTP'] = 'Bearer'
# Configure API key authorization: Token
configuration = gitea_api.Configuration()
configuration.api_key['token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['token'] = 'Bearer'
# create an instance of the API class
api_instance = gitea_api.IssueApi(gitea_api.ApiClient(configuration))
owner = 'owner_example' # str | owner of the repo
repo = 'repo_example' # str | name of the repo
body = gitea_api.CreateMilestoneOption() # CreateMilestoneOption | (optional)
try:
# Create a milestone
api_response = api_instance.issue_create_milestone(owner, repo, body=body)
pprint(api_response)
except ApiException as e:
print("Exception when calling IssueApi->issue_create_milestone: %s\n" % e)| Name | Type | Description | Notes |
|---|---|---|---|
| owner | str | owner of the repo | |
| repo | str | name of the repo | |
| body | CreateMilestoneOption | [optional] |
AccessToken, AuthorizationHeaderToken, BasicAuth, SudoHeader, SudoParam, TOTPHeader, Token
- Content-Type: application/json
- Accept: application/json
[Back to top] [Back to API list] [Back to Model list] [Back to README]
issue_delete_comment(owner, repo, id)
Delete a comment
from __future__ import print_function
import time
import gitea_api
from gitea_api.rest import ApiException
from pprint import pprint
# Configure API key authorization: AccessToken
configuration = gitea_api.Configuration()
configuration.api_key['access_token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['access_token'] = 'Bearer'
# Configure API key authorization: AuthorizationHeaderToken
configuration = gitea_api.Configuration()
configuration.api_key['Authorization'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Authorization'] = 'Bearer'
# Configure HTTP basic authorization: BasicAuth
configuration = gitea_api.Configuration()
configuration.username = 'YOUR_USERNAME'
configuration.password = 'YOUR_PASSWORD'
# Configure API key authorization: SudoHeader
configuration = gitea_api.Configuration()
configuration.api_key['Sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Sudo'] = 'Bearer'
# Configure API key authorization: SudoParam
configuration = gitea_api.Configuration()
configuration.api_key['sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['sudo'] = 'Bearer'
# Configure API key authorization: TOTPHeader
configuration = gitea_api.Configuration()
configuration.api_key['X-GITEA-OTP'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['X-GITEA-OTP'] = 'Bearer'
# Configure API key authorization: Token
configuration = gitea_api.Configuration()
configuration.api_key['token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['token'] = 'Bearer'
# create an instance of the API class
api_instance = gitea_api.IssueApi(gitea_api.ApiClient(configuration))
owner = 'owner_example' # str | owner of the repo
repo = 'repo_example' # str | name of the repo
id = 789 # int | id of comment to delete
try:
# Delete a comment
api_instance.issue_delete_comment(owner, repo, id)
except ApiException as e:
print("Exception when calling IssueApi->issue_delete_comment: %s\n" % e)| Name | Type | Description | Notes |
|---|---|---|---|
| owner | str | owner of the repo | |
| repo | str | name of the repo | |
| id | int | id of comment to delete |
void (empty response body)
AccessToken, AuthorizationHeaderToken, BasicAuth, SudoHeader, SudoParam, TOTPHeader, Token
- Content-Type: application/json, text/plain
- Accept: application/json, text/html
[Back to top] [Back to API list] [Back to Model list] [Back to README]
issue_delete_comment_deprecated(owner, repo, index, id)
Delete a comment
from __future__ import print_function
import time
import gitea_api
from gitea_api.rest import ApiException
from pprint import pprint
# Configure API key authorization: AccessToken
configuration = gitea_api.Configuration()
configuration.api_key['access_token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['access_token'] = 'Bearer'
# Configure API key authorization: AuthorizationHeaderToken
configuration = gitea_api.Configuration()
configuration.api_key['Authorization'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Authorization'] = 'Bearer'
# Configure HTTP basic authorization: BasicAuth
configuration = gitea_api.Configuration()
configuration.username = 'YOUR_USERNAME'
configuration.password = 'YOUR_PASSWORD'
# Configure API key authorization: SudoHeader
configuration = gitea_api.Configuration()
configuration.api_key['Sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Sudo'] = 'Bearer'
# Configure API key authorization: SudoParam
configuration = gitea_api.Configuration()
configuration.api_key['sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['sudo'] = 'Bearer'
# Configure API key authorization: TOTPHeader
configuration = gitea_api.Configuration()
configuration.api_key['X-GITEA-OTP'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['X-GITEA-OTP'] = 'Bearer'
# Configure API key authorization: Token
configuration = gitea_api.Configuration()
configuration.api_key['token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['token'] = 'Bearer'
# create an instance of the API class
api_instance = gitea_api.IssueApi(gitea_api.ApiClient(configuration))
owner = 'owner_example' # str | owner of the repo
repo = 'repo_example' # str | name of the repo
index = 56 # int | this parameter is ignored
id = 789 # int | id of comment to delete
try:
# Delete a comment
api_instance.issue_delete_comment_deprecated(owner, repo, index, id)
except ApiException as e:
print("Exception when calling IssueApi->issue_delete_comment_deprecated: %s\n" % e)| Name | Type | Description | Notes |
|---|---|---|---|
| owner | str | owner of the repo | |
| repo | str | name of the repo | |
| index | int | this parameter is ignored | |
| id | int | id of comment to delete |
void (empty response body)
AccessToken, AuthorizationHeaderToken, BasicAuth, SudoHeader, SudoParam, TOTPHeader, Token
- Content-Type: application/json, text/plain
- Accept: application/json, text/html
[Back to top] [Back to API list] [Back to Model list] [Back to README]
issue_delete_comment_reaction(owner, repo, id, content=content)
Remove a reaction from a comment of an issue
from __future__ import print_function
import time
import gitea_api
from gitea_api.rest import ApiException
from pprint import pprint
# Configure API key authorization: AccessToken
configuration = gitea_api.Configuration()
configuration.api_key['access_token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['access_token'] = 'Bearer'
# Configure API key authorization: AuthorizationHeaderToken
configuration = gitea_api.Configuration()
configuration.api_key['Authorization'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Authorization'] = 'Bearer'
# Configure HTTP basic authorization: BasicAuth
configuration = gitea_api.Configuration()
configuration.username = 'YOUR_USERNAME'
configuration.password = 'YOUR_PASSWORD'
# Configure API key authorization: SudoHeader
configuration = gitea_api.Configuration()
configuration.api_key['Sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Sudo'] = 'Bearer'
# Configure API key authorization: SudoParam
configuration = gitea_api.Configuration()
configuration.api_key['sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['sudo'] = 'Bearer'
# Configure API key authorization: TOTPHeader
configuration = gitea_api.Configuration()
configuration.api_key['X-GITEA-OTP'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['X-GITEA-OTP'] = 'Bearer'
# Configure API key authorization: Token
configuration = gitea_api.Configuration()
configuration.api_key['token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['token'] = 'Bearer'
# create an instance of the API class
api_instance = gitea_api.IssueApi(gitea_api.ApiClient(configuration))
owner = 'owner_example' # str | owner of the repo
repo = 'repo_example' # str | name of the repo
id = 789 # int | id of the comment to edit
content = gitea_api.EditReactionOption() # EditReactionOption | (optional)
try:
# Remove a reaction from a comment of an issue
api_instance.issue_delete_comment_reaction(owner, repo, id, content=content)
except ApiException as e:
print("Exception when calling IssueApi->issue_delete_comment_reaction: %s\n" % e)| Name | Type | Description | Notes |
|---|---|---|---|
| owner | str | owner of the repo | |
| repo | str | name of the repo | |
| id | int | id of the comment to edit | |
| content | EditReactionOption | [optional] |
void (empty response body)
AccessToken, AuthorizationHeaderToken, BasicAuth, SudoHeader, SudoParam, TOTPHeader, Token
- Content-Type: application/json
- Accept: application/json
[Back to top] [Back to API list] [Back to Model list] [Back to README]
issue_delete_issue_reaction(owner, repo, index, content=content)
Remove a reaction from an issue
from __future__ import print_function
import time
import gitea_api
from gitea_api.rest import ApiException
from pprint import pprint
# Configure API key authorization: AccessToken
configuration = gitea_api.Configuration()
configuration.api_key['access_token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['access_token'] = 'Bearer'
# Configure API key authorization: AuthorizationHeaderToken
configuration = gitea_api.Configuration()
configuration.api_key['Authorization'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Authorization'] = 'Bearer'
# Configure HTTP basic authorization: BasicAuth
configuration = gitea_api.Configuration()
configuration.username = 'YOUR_USERNAME'
configuration.password = 'YOUR_PASSWORD'
# Configure API key authorization: SudoHeader
configuration = gitea_api.Configuration()
configuration.api_key['Sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Sudo'] = 'Bearer'
# Configure API key authorization: SudoParam
configuration = gitea_api.Configuration()
configuration.api_key['sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['sudo'] = 'Bearer'
# Configure API key authorization: TOTPHeader
configuration = gitea_api.Configuration()
configuration.api_key['X-GITEA-OTP'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['X-GITEA-OTP'] = 'Bearer'
# Configure API key authorization: Token
configuration = gitea_api.Configuration()
configuration.api_key['token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['token'] = 'Bearer'
# create an instance of the API class
api_instance = gitea_api.IssueApi(gitea_api.ApiClient(configuration))
owner = 'owner_example' # str | owner of the repo
repo = 'repo_example' # str | name of the repo
index = 789 # int | index of the issue
content = gitea_api.EditReactionOption() # EditReactionOption | (optional)
try:
# Remove a reaction from an issue
api_instance.issue_delete_issue_reaction(owner, repo, index, content=content)
except ApiException as e:
print("Exception when calling IssueApi->issue_delete_issue_reaction: %s\n" % e)| Name | Type | Description | Notes |
|---|---|---|---|
| owner | str | owner of the repo | |
| repo | str | name of the repo | |
| index | int | index of the issue | |
| content | EditReactionOption | [optional] |
void (empty response body)
AccessToken, AuthorizationHeaderToken, BasicAuth, SudoHeader, SudoParam, TOTPHeader, Token
- Content-Type: application/json
- Accept: application/json
[Back to top] [Back to API list] [Back to Model list] [Back to README]
issue_delete_label(owner, repo, id)
Delete a label
from __future__ import print_function
import time
import gitea_api
from gitea_api.rest import ApiException
from pprint import pprint
# Configure API key authorization: AccessToken
configuration = gitea_api.Configuration()
configuration.api_key['access_token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['access_token'] = 'Bearer'
# Configure API key authorization: AuthorizationHeaderToken
configuration = gitea_api.Configuration()
configuration.api_key['Authorization'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Authorization'] = 'Bearer'
# Configure HTTP basic authorization: BasicAuth
configuration = gitea_api.Configuration()
configuration.username = 'YOUR_USERNAME'
configuration.password = 'YOUR_PASSWORD'
# Configure API key authorization: SudoHeader
configuration = gitea_api.Configuration()
configuration.api_key['Sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Sudo'] = 'Bearer'
# Configure API key authorization: SudoParam
configuration = gitea_api.Configuration()
configuration.api_key['sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['sudo'] = 'Bearer'
# Configure API key authorization: TOTPHeader
configuration = gitea_api.Configuration()
configuration.api_key['X-GITEA-OTP'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['X-GITEA-OTP'] = 'Bearer'
# Configure API key authorization: Token
configuration = gitea_api.Configuration()
configuration.api_key['token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['token'] = 'Bearer'
# create an instance of the API class
api_instance = gitea_api.IssueApi(gitea_api.ApiClient(configuration))
owner = 'owner_example' # str | owner of the repo
repo = 'repo_example' # str | name of the repo
id = 789 # int | id of the label to delete
try:
# Delete a label
api_instance.issue_delete_label(owner, repo, id)
except ApiException as e:
print("Exception when calling IssueApi->issue_delete_label: %s\n" % e)| Name | Type | Description | Notes |
|---|---|---|---|
| owner | str | owner of the repo | |
| repo | str | name of the repo | |
| id | int | id of the label to delete |
void (empty response body)
AccessToken, AuthorizationHeaderToken, BasicAuth, SudoHeader, SudoParam, TOTPHeader, Token
- Content-Type: application/json, text/plain
- Accept: application/json, text/html
[Back to top] [Back to API list] [Back to Model list] [Back to README]
issue_delete_milestone(owner, repo, id)
Delete a milestone
from __future__ import print_function
import time
import gitea_api
from gitea_api.rest import ApiException
from pprint import pprint
# Configure API key authorization: AccessToken
configuration = gitea_api.Configuration()
configuration.api_key['access_token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['access_token'] = 'Bearer'
# Configure API key authorization: AuthorizationHeaderToken
configuration = gitea_api.Configuration()
configuration.api_key['Authorization'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Authorization'] = 'Bearer'
# Configure HTTP basic authorization: BasicAuth
configuration = gitea_api.Configuration()
configuration.username = 'YOUR_USERNAME'
configuration.password = 'YOUR_PASSWORD'
# Configure API key authorization: SudoHeader
configuration = gitea_api.Configuration()
configuration.api_key['Sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Sudo'] = 'Bearer'
# Configure API key authorization: SudoParam
configuration = gitea_api.Configuration()
configuration.api_key['sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['sudo'] = 'Bearer'
# Configure API key authorization: TOTPHeader
configuration = gitea_api.Configuration()
configuration.api_key['X-GITEA-OTP'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['X-GITEA-OTP'] = 'Bearer'
# Configure API key authorization: Token
configuration = gitea_api.Configuration()
configuration.api_key['token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['token'] = 'Bearer'
# create an instance of the API class
api_instance = gitea_api.IssueApi(gitea_api.ApiClient(configuration))
owner = 'owner_example' # str | owner of the repo
repo = 'repo_example' # str | name of the repo
id = 'id_example' # str | the milestone to delete, identified by ID and if not available by name
try:
# Delete a milestone
api_instance.issue_delete_milestone(owner, repo, id)
except ApiException as e:
print("Exception when calling IssueApi->issue_delete_milestone: %s\n" % e)| Name | Type | Description | Notes |
|---|---|---|---|
| owner | str | owner of the repo | |
| repo | str | name of the repo | |
| id | str | the milestone to delete, identified by ID and if not available by name |
void (empty response body)
AccessToken, AuthorizationHeaderToken, BasicAuth, SudoHeader, SudoParam, TOTPHeader, Token
- Content-Type: application/json, text/plain
- Accept: application/json, text/html
[Back to top] [Back to API list] [Back to Model list] [Back to README]
issue_delete_stop_watch(owner, repo, index)
Delete an issue's existing stopwatch.
from __future__ import print_function
import time
import gitea_api
from gitea_api.rest import ApiException
from pprint import pprint
# Configure API key authorization: AccessToken
configuration = gitea_api.Configuration()
configuration.api_key['access_token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['access_token'] = 'Bearer'
# Configure API key authorization: AuthorizationHeaderToken
configuration = gitea_api.Configuration()
configuration.api_key['Authorization'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Authorization'] = 'Bearer'
# Configure HTTP basic authorization: BasicAuth
configuration = gitea_api.Configuration()
configuration.username = 'YOUR_USERNAME'
configuration.password = 'YOUR_PASSWORD'
# Configure API key authorization: SudoHeader
configuration = gitea_api.Configuration()
configuration.api_key['Sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Sudo'] = 'Bearer'
# Configure API key authorization: SudoParam
configuration = gitea_api.Configuration()
configuration.api_key['sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['sudo'] = 'Bearer'
# Configure API key authorization: TOTPHeader
configuration = gitea_api.Configuration()
configuration.api_key['X-GITEA-OTP'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['X-GITEA-OTP'] = 'Bearer'
# Configure API key authorization: Token
configuration = gitea_api.Configuration()
configuration.api_key['token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['token'] = 'Bearer'
# create an instance of the API class
api_instance = gitea_api.IssueApi(gitea_api.ApiClient(configuration))
owner = 'owner_example' # str | owner of the repo
repo = 'repo_example' # str | name of the repo
index = 789 # int | index of the issue to stop the stopwatch on
try:
# Delete an issue's existing stopwatch.
api_instance.issue_delete_stop_watch(owner, repo, index)
except ApiException as e:
print("Exception when calling IssueApi->issue_delete_stop_watch: %s\n" % e)| Name | Type | Description | Notes |
|---|---|---|---|
| owner | str | owner of the repo | |
| repo | str | name of the repo | |
| index | int | index of the issue to stop the stopwatch on |
void (empty response body)
AccessToken, AuthorizationHeaderToken, BasicAuth, SudoHeader, SudoParam, TOTPHeader, Token
- Content-Type: application/json
- Accept: application/json
[Back to top] [Back to API list] [Back to Model list] [Back to README]
issue_delete_subscription(owner, repo, index, user)
Unsubscribe user from issue
from __future__ import print_function
import time
import gitea_api
from gitea_api.rest import ApiException
from pprint import pprint
# Configure API key authorization: AccessToken
configuration = gitea_api.Configuration()
configuration.api_key['access_token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['access_token'] = 'Bearer'
# Configure API key authorization: AuthorizationHeaderToken
configuration = gitea_api.Configuration()
configuration.api_key['Authorization'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Authorization'] = 'Bearer'
# Configure HTTP basic authorization: BasicAuth
configuration = gitea_api.Configuration()
configuration.username = 'YOUR_USERNAME'
configuration.password = 'YOUR_PASSWORD'
# Configure API key authorization: SudoHeader
configuration = gitea_api.Configuration()
configuration.api_key['Sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Sudo'] = 'Bearer'
# Configure API key authorization: SudoParam
configuration = gitea_api.Configuration()
configuration.api_key['sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['sudo'] = 'Bearer'
# Configure API key authorization: TOTPHeader
configuration = gitea_api.Configuration()
configuration.api_key['X-GITEA-OTP'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['X-GITEA-OTP'] = 'Bearer'
# Configure API key authorization: Token
configuration = gitea_api.Configuration()
configuration.api_key['token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['token'] = 'Bearer'
# create an instance of the API class
api_instance = gitea_api.IssueApi(gitea_api.ApiClient(configuration))
owner = 'owner_example' # str | owner of the repo
repo = 'repo_example' # str | name of the repo
index = 789 # int | index of the issue
user = 'user_example' # str | user witch unsubscribe
try:
# Unsubscribe user from issue
api_instance.issue_delete_subscription(owner, repo, index, user)
except ApiException as e:
print("Exception when calling IssueApi->issue_delete_subscription: %s\n" % e)| Name | Type | Description | Notes |
|---|---|---|---|
| owner | str | owner of the repo | |
| repo | str | name of the repo | |
| index | int | index of the issue | |
| user | str | user witch unsubscribe |
void (empty response body)
AccessToken, AuthorizationHeaderToken, BasicAuth, SudoHeader, SudoParam, TOTPHeader, Token
- Content-Type: application/json
- Accept: application/json
[Back to top] [Back to API list] [Back to Model list] [Back to README]
issue_delete_time(owner, repo, index, id)
Delete specific tracked time
from __future__ import print_function
import time
import gitea_api
from gitea_api.rest import ApiException
from pprint import pprint
# Configure API key authorization: AccessToken
configuration = gitea_api.Configuration()
configuration.api_key['access_token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['access_token'] = 'Bearer'
# Configure API key authorization: AuthorizationHeaderToken
configuration = gitea_api.Configuration()
configuration.api_key['Authorization'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Authorization'] = 'Bearer'
# Configure HTTP basic authorization: BasicAuth
configuration = gitea_api.Configuration()
configuration.username = 'YOUR_USERNAME'
configuration.password = 'YOUR_PASSWORD'
# Configure API key authorization: SudoHeader
configuration = gitea_api.Configuration()
configuration.api_key['Sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Sudo'] = 'Bearer'
# Configure API key authorization: SudoParam
configuration = gitea_api.Configuration()
configuration.api_key['sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['sudo'] = 'Bearer'
# Configure API key authorization: TOTPHeader
configuration = gitea_api.Configuration()
configuration.api_key['X-GITEA-OTP'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['X-GITEA-OTP'] = 'Bearer'
# Configure API key authorization: Token
configuration = gitea_api.Configuration()
configuration.api_key['token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['token'] = 'Bearer'
# create an instance of the API class
api_instance = gitea_api.IssueApi(gitea_api.ApiClient(configuration))
owner = 'owner_example' # str | owner of the repo
repo = 'repo_example' # str | name of the repo
index = 789 # int | index of the issue
id = 789 # int | id of time to delete
try:
# Delete specific tracked time
api_instance.issue_delete_time(owner, repo, index, id)
except ApiException as e:
print("Exception when calling IssueApi->issue_delete_time: %s\n" % e)| Name | Type | Description | Notes |
|---|---|---|---|
| owner | str | owner of the repo | |
| repo | str | name of the repo | |
| index | int | index of the issue | |
| id | int | id of time to delete |
void (empty response body)
AccessToken, AuthorizationHeaderToken, BasicAuth, SudoHeader, SudoParam, TOTPHeader, Token
- Content-Type: application/json
- Accept: application/json
[Back to top] [Back to API list] [Back to Model list] [Back to README]
Comment issue_edit_comment(owner, repo, id, body=body)
Edit a comment
from __future__ import print_function
import time
import gitea_api
from gitea_api.rest import ApiException
from pprint import pprint
# Configure API key authorization: AccessToken
configuration = gitea_api.Configuration()
configuration.api_key['access_token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['access_token'] = 'Bearer'
# Configure API key authorization: AuthorizationHeaderToken
configuration = gitea_api.Configuration()
configuration.api_key['Authorization'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Authorization'] = 'Bearer'
# Configure HTTP basic authorization: BasicAuth
configuration = gitea_api.Configuration()
configuration.username = 'YOUR_USERNAME'
configuration.password = 'YOUR_PASSWORD'
# Configure API key authorization: SudoHeader
configuration = gitea_api.Configuration()
configuration.api_key['Sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Sudo'] = 'Bearer'
# Configure API key authorization: SudoParam
configuration = gitea_api.Configuration()
configuration.api_key['sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['sudo'] = 'Bearer'
# Configure API key authorization: TOTPHeader
configuration = gitea_api.Configuration()
configuration.api_key['X-GITEA-OTP'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['X-GITEA-OTP'] = 'Bearer'
# Configure API key authorization: Token
configuration = gitea_api.Configuration()
configuration.api_key['token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['token'] = 'Bearer'
# create an instance of the API class
api_instance = gitea_api.IssueApi(gitea_api.ApiClient(configuration))
owner = 'owner_example' # str | owner of the repo
repo = 'repo_example' # str | name of the repo
id = 789 # int | id of the comment to edit
body = gitea_api.EditIssueCommentOption() # EditIssueCommentOption | (optional)
try:
# Edit a comment
api_response = api_instance.issue_edit_comment(owner, repo, id, body=body)
pprint(api_response)
except ApiException as e:
print("Exception when calling IssueApi->issue_edit_comment: %s\n" % e)| Name | Type | Description | Notes |
|---|---|---|---|
| owner | str | owner of the repo | |
| repo | str | name of the repo | |
| id | int | id of the comment to edit | |
| body | EditIssueCommentOption | [optional] |
AccessToken, AuthorizationHeaderToken, BasicAuth, SudoHeader, SudoParam, TOTPHeader, Token
- Content-Type: application/json
- Accept: application/json
[Back to top] [Back to API list] [Back to Model list] [Back to README]
Comment issue_edit_comment_deprecated(owner, repo, index, id, body=body)
Edit a comment
from __future__ import print_function
import time
import gitea_api
from gitea_api.rest import ApiException
from pprint import pprint
# Configure API key authorization: AccessToken
configuration = gitea_api.Configuration()
configuration.api_key['access_token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['access_token'] = 'Bearer'
# Configure API key authorization: AuthorizationHeaderToken
configuration = gitea_api.Configuration()
configuration.api_key['Authorization'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Authorization'] = 'Bearer'
# Configure HTTP basic authorization: BasicAuth
configuration = gitea_api.Configuration()
configuration.username = 'YOUR_USERNAME'
configuration.password = 'YOUR_PASSWORD'
# Configure API key authorization: SudoHeader
configuration = gitea_api.Configuration()
configuration.api_key['Sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Sudo'] = 'Bearer'
# Configure API key authorization: SudoParam
configuration = gitea_api.Configuration()
configuration.api_key['sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['sudo'] = 'Bearer'
# Configure API key authorization: TOTPHeader
configuration = gitea_api.Configuration()
configuration.api_key['X-GITEA-OTP'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['X-GITEA-OTP'] = 'Bearer'
# Configure API key authorization: Token
configuration = gitea_api.Configuration()
configuration.api_key['token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['token'] = 'Bearer'
# create an instance of the API class
api_instance = gitea_api.IssueApi(gitea_api.ApiClient(configuration))
owner = 'owner_example' # str | owner of the repo
repo = 'repo_example' # str | name of the repo
index = 56 # int | this parameter is ignored
id = 789 # int | id of the comment to edit
body = gitea_api.EditIssueCommentOption() # EditIssueCommentOption | (optional)
try:
# Edit a comment
api_response = api_instance.issue_edit_comment_deprecated(owner, repo, index, id, body=body)
pprint(api_response)
except ApiException as e:
print("Exception when calling IssueApi->issue_edit_comment_deprecated: %s\n" % e)| Name | Type | Description | Notes |
|---|---|---|---|
| owner | str | owner of the repo | |
| repo | str | name of the repo | |
| index | int | this parameter is ignored | |
| id | int | id of the comment to edit | |
| body | EditIssueCommentOption | [optional] |
AccessToken, AuthorizationHeaderToken, BasicAuth, SudoHeader, SudoParam, TOTPHeader, Token
- Content-Type: application/json
- Accept: application/json
[Back to top] [Back to API list] [Back to Model list] [Back to README]
Issue issue_edit_issue(owner, repo, index, body=body)
Edit an issue. If using deadline only the date will be taken into account, and time of day ignored.
from __future__ import print_function
import time
import gitea_api
from gitea_api.rest import ApiException
from pprint import pprint
# Configure API key authorization: AccessToken
configuration = gitea_api.Configuration()
configuration.api_key['access_token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['access_token'] = 'Bearer'
# Configure API key authorization: AuthorizationHeaderToken
configuration = gitea_api.Configuration()
configuration.api_key['Authorization'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Authorization'] = 'Bearer'
# Configure HTTP basic authorization: BasicAuth
configuration = gitea_api.Configuration()
configuration.username = 'YOUR_USERNAME'
configuration.password = 'YOUR_PASSWORD'
# Configure API key authorization: SudoHeader
configuration = gitea_api.Configuration()
configuration.api_key['Sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Sudo'] = 'Bearer'
# Configure API key authorization: SudoParam
configuration = gitea_api.Configuration()
configuration.api_key['sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['sudo'] = 'Bearer'
# Configure API key authorization: TOTPHeader
configuration = gitea_api.Configuration()
configuration.api_key['X-GITEA-OTP'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['X-GITEA-OTP'] = 'Bearer'
# Configure API key authorization: Token
configuration = gitea_api.Configuration()
configuration.api_key['token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['token'] = 'Bearer'
# create an instance of the API class
api_instance = gitea_api.IssueApi(gitea_api.ApiClient(configuration))
owner = 'owner_example' # str | owner of the repo
repo = 'repo_example' # str | name of the repo
index = 789 # int | index of the issue to edit
body = gitea_api.EditIssueOption() # EditIssueOption | (optional)
try:
# Edit an issue. If using deadline only the date will be taken into account, and time of day ignored.
api_response = api_instance.issue_edit_issue(owner, repo, index, body=body)
pprint(api_response)
except ApiException as e:
print("Exception when calling IssueApi->issue_edit_issue: %s\n" % e)| Name | Type | Description | Notes |
|---|---|---|---|
| owner | str | owner of the repo | |
| repo | str | name of the repo | |
| index | int | index of the issue to edit | |
| body | EditIssueOption | [optional] |
AccessToken, AuthorizationHeaderToken, BasicAuth, SudoHeader, SudoParam, TOTPHeader, Token
- Content-Type: application/json
- Accept: application/json
[Back to top] [Back to API list] [Back to Model list] [Back to README]
IssueDeadline issue_edit_issue_deadline(owner, repo, index, body=body)
Set an issue deadline. If set to null, the deadline is deleted. If using deadline only the date will be taken into account, and time of day ignored.
from __future__ import print_function
import time
import gitea_api
from gitea_api.rest import ApiException
from pprint import pprint
# Configure API key authorization: AccessToken
configuration = gitea_api.Configuration()
configuration.api_key['access_token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['access_token'] = 'Bearer'
# Configure API key authorization: AuthorizationHeaderToken
configuration = gitea_api.Configuration()
configuration.api_key['Authorization'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Authorization'] = 'Bearer'
# Configure HTTP basic authorization: BasicAuth
configuration = gitea_api.Configuration()
configuration.username = 'YOUR_USERNAME'
configuration.password = 'YOUR_PASSWORD'
# Configure API key authorization: SudoHeader
configuration = gitea_api.Configuration()
configuration.api_key['Sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Sudo'] = 'Bearer'
# Configure API key authorization: SudoParam
configuration = gitea_api.Configuration()
configuration.api_key['sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['sudo'] = 'Bearer'
# Configure API key authorization: TOTPHeader
configuration = gitea_api.Configuration()
configuration.api_key['X-GITEA-OTP'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['X-GITEA-OTP'] = 'Bearer'
# Configure API key authorization: Token
configuration = gitea_api.Configuration()
configuration.api_key['token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['token'] = 'Bearer'
# create an instance of the API class
api_instance = gitea_api.IssueApi(gitea_api.ApiClient(configuration))
owner = 'owner_example' # str | owner of the repo
repo = 'repo_example' # str | name of the repo
index = 789 # int | index of the issue to create or update a deadline on
body = gitea_api.EditDeadlineOption() # EditDeadlineOption | (optional)
try:
# Set an issue deadline. If set to null, the deadline is deleted. If using deadline only the date will be taken into account, and time of day ignored.
api_response = api_instance.issue_edit_issue_deadline(owner, repo, index, body=body)
pprint(api_response)
except ApiException as e:
print("Exception when calling IssueApi->issue_edit_issue_deadline: %s\n" % e)| Name | Type | Description | Notes |
|---|---|---|---|
| owner | str | owner of the repo | |
| repo | str | name of the repo | |
| index | int | index of the issue to create or update a deadline on | |
| body | EditDeadlineOption | [optional] |
AccessToken, AuthorizationHeaderToken, BasicAuth, SudoHeader, SudoParam, TOTPHeader, Token
- Content-Type: application/json
- Accept: application/json
[Back to top] [Back to API list] [Back to Model list] [Back to README]
Label issue_edit_label(owner, repo, id, body=body)
Update a label
from __future__ import print_function
import time
import gitea_api
from gitea_api.rest import ApiException
from pprint import pprint
# Configure API key authorization: AccessToken
configuration = gitea_api.Configuration()
configuration.api_key['access_token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['access_token'] = 'Bearer'
# Configure API key authorization: AuthorizationHeaderToken
configuration = gitea_api.Configuration()
configuration.api_key['Authorization'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Authorization'] = 'Bearer'
# Configure HTTP basic authorization: BasicAuth
configuration = gitea_api.Configuration()
configuration.username = 'YOUR_USERNAME'
configuration.password = 'YOUR_PASSWORD'
# Configure API key authorization: SudoHeader
configuration = gitea_api.Configuration()
configuration.api_key['Sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Sudo'] = 'Bearer'
# Configure API key authorization: SudoParam
configuration = gitea_api.Configuration()
configuration.api_key['sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['sudo'] = 'Bearer'
# Configure API key authorization: TOTPHeader
configuration = gitea_api.Configuration()
configuration.api_key['X-GITEA-OTP'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['X-GITEA-OTP'] = 'Bearer'
# Configure API key authorization: Token
configuration = gitea_api.Configuration()
configuration.api_key['token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['token'] = 'Bearer'
# create an instance of the API class
api_instance = gitea_api.IssueApi(gitea_api.ApiClient(configuration))
owner = 'owner_example' # str | owner of the repo
repo = 'repo_example' # str | name of the repo
id = 789 # int | id of the label to edit
body = gitea_api.EditLabelOption() # EditLabelOption | (optional)
try:
# Update a label
api_response = api_instance.issue_edit_label(owner, repo, id, body=body)
pprint(api_response)
except ApiException as e:
print("Exception when calling IssueApi->issue_edit_label: %s\n" % e)| Name | Type | Description | Notes |
|---|---|---|---|
| owner | str | owner of the repo | |
| repo | str | name of the repo | |
| id | int | id of the label to edit | |
| body | EditLabelOption | [optional] |
AccessToken, AuthorizationHeaderToken, BasicAuth, SudoHeader, SudoParam, TOTPHeader, Token
- Content-Type: application/json
- Accept: application/json
[Back to top] [Back to API list] [Back to Model list] [Back to README]
Milestone issue_edit_milestone(owner, repo, id, body=body)
Update a milestone
from __future__ import print_function
import time
import gitea_api
from gitea_api.rest import ApiException
from pprint import pprint
# Configure API key authorization: AccessToken
configuration = gitea_api.Configuration()
configuration.api_key['access_token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['access_token'] = 'Bearer'
# Configure API key authorization: AuthorizationHeaderToken
configuration = gitea_api.Configuration()
configuration.api_key['Authorization'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Authorization'] = 'Bearer'
# Configure HTTP basic authorization: BasicAuth
configuration = gitea_api.Configuration()
configuration.username = 'YOUR_USERNAME'
configuration.password = 'YOUR_PASSWORD'
# Configure API key authorization: SudoHeader
configuration = gitea_api.Configuration()
configuration.api_key['Sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Sudo'] = 'Bearer'
# Configure API key authorization: SudoParam
configuration = gitea_api.Configuration()
configuration.api_key['sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['sudo'] = 'Bearer'
# Configure API key authorization: TOTPHeader
configuration = gitea_api.Configuration()
configuration.api_key['X-GITEA-OTP'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['X-GITEA-OTP'] = 'Bearer'
# Configure API key authorization: Token
configuration = gitea_api.Configuration()
configuration.api_key['token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['token'] = 'Bearer'
# create an instance of the API class
api_instance = gitea_api.IssueApi(gitea_api.ApiClient(configuration))
owner = 'owner_example' # str | owner of the repo
repo = 'repo_example' # str | name of the repo
id = 'id_example' # str | the milestone to edit, identified by ID and if not available by name
body = gitea_api.EditMilestoneOption() # EditMilestoneOption | (optional)
try:
# Update a milestone
api_response = api_instance.issue_edit_milestone(owner, repo, id, body=body)
pprint(api_response)
except ApiException as e:
print("Exception when calling IssueApi->issue_edit_milestone: %s\n" % e)| Name | Type | Description | Notes |
|---|---|---|---|
| owner | str | owner of the repo | |
| repo | str | name of the repo | |
| id | str | the milestone to edit, identified by ID and if not available by name | |
| body | EditMilestoneOption | [optional] |
AccessToken, AuthorizationHeaderToken, BasicAuth, SudoHeader, SudoParam, TOTPHeader, Token
- Content-Type: application/json
- Accept: application/json
[Back to top] [Back to API list] [Back to Model list] [Back to README]
Comment issue_get_comment(owner, repo, id)
Get a comment
from __future__ import print_function
import time
import gitea_api
from gitea_api.rest import ApiException
from pprint import pprint
# Configure API key authorization: AccessToken
configuration = gitea_api.Configuration()
configuration.api_key['access_token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['access_token'] = 'Bearer'
# Configure API key authorization: AuthorizationHeaderToken
configuration = gitea_api.Configuration()
configuration.api_key['Authorization'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Authorization'] = 'Bearer'
# Configure HTTP basic authorization: BasicAuth
configuration = gitea_api.Configuration()
configuration.username = 'YOUR_USERNAME'
configuration.password = 'YOUR_PASSWORD'
# Configure API key authorization: SudoHeader
configuration = gitea_api.Configuration()
configuration.api_key['Sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Sudo'] = 'Bearer'
# Configure API key authorization: SudoParam
configuration = gitea_api.Configuration()
configuration.api_key['sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['sudo'] = 'Bearer'
# Configure API key authorization: TOTPHeader
configuration = gitea_api.Configuration()
configuration.api_key['X-GITEA-OTP'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['X-GITEA-OTP'] = 'Bearer'
# Configure API key authorization: Token
configuration = gitea_api.Configuration()
configuration.api_key['token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['token'] = 'Bearer'
# create an instance of the API class
api_instance = gitea_api.IssueApi(gitea_api.ApiClient(configuration))
owner = 'owner_example' # str | owner of the repo
repo = 'repo_example' # str | name of the repo
id = 789 # int | id of the comment
try:
# Get a comment
api_response = api_instance.issue_get_comment(owner, repo, id)
pprint(api_response)
except ApiException as e:
print("Exception when calling IssueApi->issue_get_comment: %s\n" % e)| Name | Type | Description | Notes |
|---|---|---|---|
| owner | str | owner of the repo | |
| repo | str | name of the repo | |
| id | int | id of the comment |
AccessToken, AuthorizationHeaderToken, BasicAuth, SudoHeader, SudoParam, TOTPHeader, Token
- Content-Type: application/json
- Accept: application/json
[Back to top] [Back to API list] [Back to Model list] [Back to README]
list[Reaction] issue_get_comment_reactions(owner, repo, id)
Get a list of reactions from a comment of an issue
from __future__ import print_function
import time
import gitea_api
from gitea_api.rest import ApiException
from pprint import pprint
# Configure API key authorization: AccessToken
configuration = gitea_api.Configuration()
configuration.api_key['access_token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['access_token'] = 'Bearer'
# Configure API key authorization: AuthorizationHeaderToken
configuration = gitea_api.Configuration()
configuration.api_key['Authorization'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Authorization'] = 'Bearer'
# Configure HTTP basic authorization: BasicAuth
configuration = gitea_api.Configuration()
configuration.username = 'YOUR_USERNAME'
configuration.password = 'YOUR_PASSWORD'
# Configure API key authorization: SudoHeader
configuration = gitea_api.Configuration()
configuration.api_key['Sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Sudo'] = 'Bearer'
# Configure API key authorization: SudoParam
configuration = gitea_api.Configuration()
configuration.api_key['sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['sudo'] = 'Bearer'
# Configure API key authorization: TOTPHeader
configuration = gitea_api.Configuration()
configuration.api_key['X-GITEA-OTP'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['X-GITEA-OTP'] = 'Bearer'
# Configure API key authorization: Token
configuration = gitea_api.Configuration()
configuration.api_key['token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['token'] = 'Bearer'
# create an instance of the API class
api_instance = gitea_api.IssueApi(gitea_api.ApiClient(configuration))
owner = 'owner_example' # str | owner of the repo
repo = 'repo_example' # str | name of the repo
id = 789 # int | id of the comment to edit
try:
# Get a list of reactions from a comment of an issue
api_response = api_instance.issue_get_comment_reactions(owner, repo, id)
pprint(api_response)
except ApiException as e:
print("Exception when calling IssueApi->issue_get_comment_reactions: %s\n" % e)| Name | Type | Description | Notes |
|---|---|---|---|
| owner | str | owner of the repo | |
| repo | str | name of the repo | |
| id | int | id of the comment to edit |
AccessToken, AuthorizationHeaderToken, BasicAuth, SudoHeader, SudoParam, TOTPHeader, Token
- Content-Type: application/json
- Accept: application/json
[Back to top] [Back to API list] [Back to Model list] [Back to README]
list[Comment] issue_get_comments(owner, repo, index, since=since, before=before)
List all comments on an issue
from __future__ import print_function
import time
import gitea_api
from gitea_api.rest import ApiException
from pprint import pprint
# Configure API key authorization: AccessToken
configuration = gitea_api.Configuration()
configuration.api_key['access_token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['access_token'] = 'Bearer'
# Configure API key authorization: AuthorizationHeaderToken
configuration = gitea_api.Configuration()
configuration.api_key['Authorization'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Authorization'] = 'Bearer'
# Configure HTTP basic authorization: BasicAuth
configuration = gitea_api.Configuration()
configuration.username = 'YOUR_USERNAME'
configuration.password = 'YOUR_PASSWORD'
# Configure API key authorization: SudoHeader
configuration = gitea_api.Configuration()
configuration.api_key['Sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Sudo'] = 'Bearer'
# Configure API key authorization: SudoParam
configuration = gitea_api.Configuration()
configuration.api_key['sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['sudo'] = 'Bearer'
# Configure API key authorization: TOTPHeader
configuration = gitea_api.Configuration()
configuration.api_key['X-GITEA-OTP'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['X-GITEA-OTP'] = 'Bearer'
# Configure API key authorization: Token
configuration = gitea_api.Configuration()
configuration.api_key['token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['token'] = 'Bearer'
# create an instance of the API class
api_instance = gitea_api.IssueApi(gitea_api.ApiClient(configuration))
owner = 'owner_example' # str | owner of the repo
repo = 'repo_example' # str | name of the repo
index = 789 # int | index of the issue
since = '2013-10-20T19:20:30+01:00' # datetime | if provided, only comments updated since the specified time are returned. (optional)
before = '2013-10-20T19:20:30+01:00' # datetime | if provided, only comments updated before the provided time are returned. (optional)
try:
# List all comments on an issue
api_response = api_instance.issue_get_comments(owner, repo, index, since=since, before=before)
pprint(api_response)
except ApiException as e:
print("Exception when calling IssueApi->issue_get_comments: %s\n" % e)| Name | Type | Description | Notes |
|---|---|---|---|
| owner | str | owner of the repo | |
| repo | str | name of the repo | |
| index | int | index of the issue | |
| since | datetime | if provided, only comments updated since the specified time are returned. | [optional] |
| before | datetime | if provided, only comments updated before the provided time are returned. | [optional] |
AccessToken, AuthorizationHeaderToken, BasicAuth, SudoHeader, SudoParam, TOTPHeader, Token
- Content-Type: application/json, text/plain
- Accept: application/json
[Back to top] [Back to API list] [Back to Model list] [Back to README]
Issue issue_get_issue(owner, repo, index)
Get an issue
from __future__ import print_function
import time
import gitea_api
from gitea_api.rest import ApiException
from pprint import pprint
# Configure API key authorization: AccessToken
configuration = gitea_api.Configuration()
configuration.api_key['access_token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['access_token'] = 'Bearer'
# Configure API key authorization: AuthorizationHeaderToken
configuration = gitea_api.Configuration()
configuration.api_key['Authorization'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Authorization'] = 'Bearer'
# Configure HTTP basic authorization: BasicAuth
configuration = gitea_api.Configuration()
configuration.username = 'YOUR_USERNAME'
configuration.password = 'YOUR_PASSWORD'
# Configure API key authorization: SudoHeader
configuration = gitea_api.Configuration()
configuration.api_key['Sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Sudo'] = 'Bearer'
# Configure API key authorization: SudoParam
configuration = gitea_api.Configuration()
configuration.api_key['sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['sudo'] = 'Bearer'
# Configure API key authorization: TOTPHeader
configuration = gitea_api.Configuration()
configuration.api_key['X-GITEA-OTP'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['X-GITEA-OTP'] = 'Bearer'
# Configure API key authorization: Token
configuration = gitea_api.Configuration()
configuration.api_key['token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['token'] = 'Bearer'
# create an instance of the API class
api_instance = gitea_api.IssueApi(gitea_api.ApiClient(configuration))
owner = 'owner_example' # str | owner of the repo
repo = 'repo_example' # str | name of the repo
index = 789 # int | index of the issue to get
try:
# Get an issue
api_response = api_instance.issue_get_issue(owner, repo, index)
pprint(api_response)
except ApiException as e:
print("Exception when calling IssueApi->issue_get_issue: %s\n" % e)| Name | Type | Description | Notes |
|---|---|---|---|
| owner | str | owner of the repo | |
| repo | str | name of the repo | |
| index | int | index of the issue to get |
AccessToken, AuthorizationHeaderToken, BasicAuth, SudoHeader, SudoParam, TOTPHeader, Token
- Content-Type: application/json, text/plain
- Accept: application/json
[Back to top] [Back to API list] [Back to Model list] [Back to README]
list[Reaction] issue_get_issue_reactions(owner, repo, index, page=page, limit=limit)
Get a list reactions of an issue
from __future__ import print_function
import time
import gitea_api
from gitea_api.rest import ApiException
from pprint import pprint
# Configure API key authorization: AccessToken
configuration = gitea_api.Configuration()
configuration.api_key['access_token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['access_token'] = 'Bearer'
# Configure API key authorization: AuthorizationHeaderToken
configuration = gitea_api.Configuration()
configuration.api_key['Authorization'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Authorization'] = 'Bearer'
# Configure HTTP basic authorization: BasicAuth
configuration = gitea_api.Configuration()
configuration.username = 'YOUR_USERNAME'
configuration.password = 'YOUR_PASSWORD'
# Configure API key authorization: SudoHeader
configuration = gitea_api.Configuration()
configuration.api_key['Sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Sudo'] = 'Bearer'
# Configure API key authorization: SudoParam
configuration = gitea_api.Configuration()
configuration.api_key['sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['sudo'] = 'Bearer'
# Configure API key authorization: TOTPHeader
configuration = gitea_api.Configuration()
configuration.api_key['X-GITEA-OTP'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['X-GITEA-OTP'] = 'Bearer'
# Configure API key authorization: Token
configuration = gitea_api.Configuration()
configuration.api_key['token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['token'] = 'Bearer'
# create an instance of the API class
api_instance = gitea_api.IssueApi(gitea_api.ApiClient(configuration))
owner = 'owner_example' # str | owner of the repo
repo = 'repo_example' # str | name of the repo
index = 789 # int | index of the issue
page = 56 # int | page number of results to return (1-based) (optional)
limit = 56 # int | page size of results (optional)
try:
# Get a list reactions of an issue
api_response = api_instance.issue_get_issue_reactions(owner, repo, index, page=page, limit=limit)
pprint(api_response)
except ApiException as e:
print("Exception when calling IssueApi->issue_get_issue_reactions: %s\n" % e)| Name | Type | Description | Notes |
|---|---|---|---|
| owner | str | owner of the repo | |
| repo | str | name of the repo | |
| index | int | index of the issue | |
| page | int | page number of results to return (1-based) | [optional] |
| limit | int | page size of results | [optional] |
AccessToken, AuthorizationHeaderToken, BasicAuth, SudoHeader, SudoParam, TOTPHeader, Token
- Content-Type: application/json
- Accept: application/json
[Back to top] [Back to API list] [Back to Model list] [Back to README]
Label issue_get_label(owner, repo, id)
Get a single label
from __future__ import print_function
import time
import gitea_api
from gitea_api.rest import ApiException
from pprint import pprint
# Configure API key authorization: AccessToken
configuration = gitea_api.Configuration()
configuration.api_key['access_token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['access_token'] = 'Bearer'
# Configure API key authorization: AuthorizationHeaderToken
configuration = gitea_api.Configuration()
configuration.api_key['Authorization'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Authorization'] = 'Bearer'
# Configure HTTP basic authorization: BasicAuth
configuration = gitea_api.Configuration()
configuration.username = 'YOUR_USERNAME'
configuration.password = 'YOUR_PASSWORD'
# Configure API key authorization: SudoHeader
configuration = gitea_api.Configuration()
configuration.api_key['Sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Sudo'] = 'Bearer'
# Configure API key authorization: SudoParam
configuration = gitea_api.Configuration()
configuration.api_key['sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['sudo'] = 'Bearer'
# Configure API key authorization: TOTPHeader
configuration = gitea_api.Configuration()
configuration.api_key['X-GITEA-OTP'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['X-GITEA-OTP'] = 'Bearer'
# Configure API key authorization: Token
configuration = gitea_api.Configuration()
configuration.api_key['token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['token'] = 'Bearer'
# create an instance of the API class
api_instance = gitea_api.IssueApi(gitea_api.ApiClient(configuration))
owner = 'owner_example' # str | owner of the repo
repo = 'repo_example' # str | name of the repo
id = 789 # int | id of the label to get
try:
# Get a single label
api_response = api_instance.issue_get_label(owner, repo, id)
pprint(api_response)
except ApiException as e:
print("Exception when calling IssueApi->issue_get_label: %s\n" % e)| Name | Type | Description | Notes |
|---|---|---|---|
| owner | str | owner of the repo | |
| repo | str | name of the repo | |
| id | int | id of the label to get |
AccessToken, AuthorizationHeaderToken, BasicAuth, SudoHeader, SudoParam, TOTPHeader, Token
- Content-Type: application/json, text/plain
- Accept: application/json
[Back to top] [Back to API list] [Back to Model list] [Back to README]
list[Label] issue_get_labels(owner, repo, index)
Get an issue's labels
from __future__ import print_function
import time
import gitea_api
from gitea_api.rest import ApiException
from pprint import pprint
# Configure API key authorization: AccessToken
configuration = gitea_api.Configuration()
configuration.api_key['access_token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['access_token'] = 'Bearer'
# Configure API key authorization: AuthorizationHeaderToken
configuration = gitea_api.Configuration()
configuration.api_key['Authorization'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Authorization'] = 'Bearer'
# Configure HTTP basic authorization: BasicAuth
configuration = gitea_api.Configuration()
configuration.username = 'YOUR_USERNAME'
configuration.password = 'YOUR_PASSWORD'
# Configure API key authorization: SudoHeader
configuration = gitea_api.Configuration()
configuration.api_key['Sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Sudo'] = 'Bearer'
# Configure API key authorization: SudoParam
configuration = gitea_api.Configuration()
configuration.api_key['sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['sudo'] = 'Bearer'
# Configure API key authorization: TOTPHeader
configuration = gitea_api.Configuration()
configuration.api_key['X-GITEA-OTP'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['X-GITEA-OTP'] = 'Bearer'
# Configure API key authorization: Token
configuration = gitea_api.Configuration()
configuration.api_key['token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['token'] = 'Bearer'
# create an instance of the API class
api_instance = gitea_api.IssueApi(gitea_api.ApiClient(configuration))
owner = 'owner_example' # str | owner of the repo
repo = 'repo_example' # str | name of the repo
index = 789 # int | index of the issue
try:
# Get an issue's labels
api_response = api_instance.issue_get_labels(owner, repo, index)
pprint(api_response)
except ApiException as e:
print("Exception when calling IssueApi->issue_get_labels: %s\n" % e)| Name | Type | Description | Notes |
|---|---|---|---|
| owner | str | owner of the repo | |
| repo | str | name of the repo | |
| index | int | index of the issue |
AccessToken, AuthorizationHeaderToken, BasicAuth, SudoHeader, SudoParam, TOTPHeader, Token
- Content-Type: application/json, text/plain
- Accept: application/json
[Back to top] [Back to API list] [Back to Model list] [Back to README]
Milestone issue_get_milestone(owner, repo, id)
Get a milestone
from __future__ import print_function
import time
import gitea_api
from gitea_api.rest import ApiException
from pprint import pprint
# Configure API key authorization: AccessToken
configuration = gitea_api.Configuration()
configuration.api_key['access_token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['access_token'] = 'Bearer'
# Configure API key authorization: AuthorizationHeaderToken
configuration = gitea_api.Configuration()
configuration.api_key['Authorization'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Authorization'] = 'Bearer'
# Configure HTTP basic authorization: BasicAuth
configuration = gitea_api.Configuration()
configuration.username = 'YOUR_USERNAME'
configuration.password = 'YOUR_PASSWORD'
# Configure API key authorization: SudoHeader
configuration = gitea_api.Configuration()
configuration.api_key['Sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Sudo'] = 'Bearer'
# Configure API key authorization: SudoParam
configuration = gitea_api.Configuration()
configuration.api_key['sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['sudo'] = 'Bearer'
# Configure API key authorization: TOTPHeader
configuration = gitea_api.Configuration()
configuration.api_key['X-GITEA-OTP'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['X-GITEA-OTP'] = 'Bearer'
# Configure API key authorization: Token
configuration = gitea_api.Configuration()
configuration.api_key['token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['token'] = 'Bearer'
# create an instance of the API class
api_instance = gitea_api.IssueApi(gitea_api.ApiClient(configuration))
owner = 'owner_example' # str | owner of the repo
repo = 'repo_example' # str | name of the repo
id = 'id_example' # str | the milestone to get, identified by ID and if not available by name
try:
# Get a milestone
api_response = api_instance.issue_get_milestone(owner, repo, id)
pprint(api_response)
except ApiException as e:
print("Exception when calling IssueApi->issue_get_milestone: %s\n" % e)| Name | Type | Description | Notes |
|---|---|---|---|
| owner | str | owner of the repo | |
| repo | str | name of the repo | |
| id | str | the milestone to get, identified by ID and if not available by name |
AccessToken, AuthorizationHeaderToken, BasicAuth, SudoHeader, SudoParam, TOTPHeader, Token
- Content-Type: application/json, text/plain
- Accept: application/json
[Back to top] [Back to API list] [Back to Model list] [Back to README]
list[Milestone] issue_get_milestones_list(owner, repo, state=state, name=name, page=page, limit=limit)
Get all of a repository's opened milestones
from __future__ import print_function
import time
import gitea_api
from gitea_api.rest import ApiException
from pprint import pprint
# Configure API key authorization: AccessToken
configuration = gitea_api.Configuration()
configuration.api_key['access_token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['access_token'] = 'Bearer'
# Configure API key authorization: AuthorizationHeaderToken
configuration = gitea_api.Configuration()
configuration.api_key['Authorization'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Authorization'] = 'Bearer'
# Configure HTTP basic authorization: BasicAuth
configuration = gitea_api.Configuration()
configuration.username = 'YOUR_USERNAME'
configuration.password = 'YOUR_PASSWORD'
# Configure API key authorization: SudoHeader
configuration = gitea_api.Configuration()
configuration.api_key['Sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Sudo'] = 'Bearer'
# Configure API key authorization: SudoParam
configuration = gitea_api.Configuration()
configuration.api_key['sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['sudo'] = 'Bearer'
# Configure API key authorization: TOTPHeader
configuration = gitea_api.Configuration()
configuration.api_key['X-GITEA-OTP'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['X-GITEA-OTP'] = 'Bearer'
# Configure API key authorization: Token
configuration = gitea_api.Configuration()
configuration.api_key['token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['token'] = 'Bearer'
# create an instance of the API class
api_instance = gitea_api.IssueApi(gitea_api.ApiClient(configuration))
owner = 'owner_example' # str | owner of the repo
repo = 'repo_example' # str | name of the repo
state = 'state_example' # str | Milestone state, Recognised values are open, closed and all. Defaults to \"open\" (optional)
name = 'name_example' # str | filter by milestone name (optional)
page = 56 # int | page number of results to return (1-based) (optional)
limit = 56 # int | page size of results (optional)
try:
# Get all of a repository's opened milestones
api_response = api_instance.issue_get_milestones_list(owner, repo, state=state, name=name, page=page, limit=limit)
pprint(api_response)
except ApiException as e:
print("Exception when calling IssueApi->issue_get_milestones_list: %s\n" % e)| Name | Type | Description | Notes |
|---|---|---|---|
| owner | str | owner of the repo | |
| repo | str | name of the repo | |
| state | str | Milestone state, Recognised values are open, closed and all. Defaults to "open" | [optional] |
| name | str | filter by milestone name | [optional] |
| page | int | page number of results to return (1-based) | [optional] |
| limit | int | page size of results | [optional] |
AccessToken, AuthorizationHeaderToken, BasicAuth, SudoHeader, SudoParam, TOTPHeader, Token
- Content-Type: application/json, text/plain
- Accept: application/json
[Back to top] [Back to API list] [Back to Model list] [Back to README]
list[Comment] issue_get_repo_comments(owner, repo, since=since, before=before, page=page, limit=limit)
List all comments in a repository
from __future__ import print_function
import time
import gitea_api
from gitea_api.rest import ApiException
from pprint import pprint
# Configure API key authorization: AccessToken
configuration = gitea_api.Configuration()
configuration.api_key['access_token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['access_token'] = 'Bearer'
# Configure API key authorization: AuthorizationHeaderToken
configuration = gitea_api.Configuration()
configuration.api_key['Authorization'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Authorization'] = 'Bearer'
# Configure HTTP basic authorization: BasicAuth
configuration = gitea_api.Configuration()
configuration.username = 'YOUR_USERNAME'
configuration.password = 'YOUR_PASSWORD'
# Configure API key authorization: SudoHeader
configuration = gitea_api.Configuration()
configuration.api_key['Sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Sudo'] = 'Bearer'
# Configure API key authorization: SudoParam
configuration = gitea_api.Configuration()
configuration.api_key['sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['sudo'] = 'Bearer'
# Configure API key authorization: TOTPHeader
configuration = gitea_api.Configuration()
configuration.api_key['X-GITEA-OTP'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['X-GITEA-OTP'] = 'Bearer'
# Configure API key authorization: Token
configuration = gitea_api.Configuration()
configuration.api_key['token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['token'] = 'Bearer'
# create an instance of the API class
api_instance = gitea_api.IssueApi(gitea_api.ApiClient(configuration))
owner = 'owner_example' # str | owner of the repo
repo = 'repo_example' # str | name of the repo
since = '2013-10-20T19:20:30+01:00' # datetime | if provided, only comments updated since the provided time are returned. (optional)
before = '2013-10-20T19:20:30+01:00' # datetime | if provided, only comments updated before the provided time are returned. (optional)
page = 56 # int | page number of results to return (1-based) (optional)
limit = 56 # int | page size of results (optional)
try:
# List all comments in a repository
api_response = api_instance.issue_get_repo_comments(owner, repo, since=since, before=before, page=page, limit=limit)
pprint(api_response)
except ApiException as e:
print("Exception when calling IssueApi->issue_get_repo_comments: %s\n" % e)| Name | Type | Description | Notes |
|---|---|---|---|
| owner | str | owner of the repo | |
| repo | str | name of the repo | |
| since | datetime | if provided, only comments updated since the provided time are returned. | [optional] |
| before | datetime | if provided, only comments updated before the provided time are returned. | [optional] |
| page | int | page number of results to return (1-based) | [optional] |
| limit | int | page size of results | [optional] |
AccessToken, AuthorizationHeaderToken, BasicAuth, SudoHeader, SudoParam, TOTPHeader, Token
- Content-Type: application/json, text/plain
- Accept: application/json
[Back to top] [Back to API list] [Back to Model list] [Back to README]
list[Issue] issue_list_issues(owner, repo, state=state, labels=labels, q=q, type=type, milestones=milestones, since=since, before=before, created_by=created_by, assigned_by=assigned_by, mentioned_by=mentioned_by, page=page, limit=limit)
List a repository's issues
from __future__ import print_function
import time
import gitea_api
from gitea_api.rest import ApiException
from pprint import pprint
# Configure API key authorization: AccessToken
configuration = gitea_api.Configuration()
configuration.api_key['access_token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['access_token'] = 'Bearer'
# Configure API key authorization: AuthorizationHeaderToken
configuration = gitea_api.Configuration()
configuration.api_key['Authorization'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Authorization'] = 'Bearer'
# Configure HTTP basic authorization: BasicAuth
configuration = gitea_api.Configuration()
configuration.username = 'YOUR_USERNAME'
configuration.password = 'YOUR_PASSWORD'
# Configure API key authorization: SudoHeader
configuration = gitea_api.Configuration()
configuration.api_key['Sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Sudo'] = 'Bearer'
# Configure API key authorization: SudoParam
configuration = gitea_api.Configuration()
configuration.api_key['sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['sudo'] = 'Bearer'
# Configure API key authorization: TOTPHeader
configuration = gitea_api.Configuration()
configuration.api_key['X-GITEA-OTP'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['X-GITEA-OTP'] = 'Bearer'
# Configure API key authorization: Token
configuration = gitea_api.Configuration()
configuration.api_key['token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['token'] = 'Bearer'
# create an instance of the API class
api_instance = gitea_api.IssueApi(gitea_api.ApiClient(configuration))
owner = 'owner_example' # str | owner of the repo
repo = 'repo_example' # str | name of the repo
state = 'state_example' # str | whether issue is open or closed (optional)
labels = 'labels_example' # str | comma separated list of labels. Fetch only issues that have any of this labels. Non existent labels are discarded (optional)
q = 'q_example' # str | search string (optional)
type = 'type_example' # str | filter by type (issues / pulls) if set (optional)
milestones = 'milestones_example' # str | comma separated list of milestone names or ids. It uses names and fall back to ids. Fetch only issues that have any of this milestones. Non existent milestones are discarded (optional)
since = '2013-10-20T19:20:30+01:00' # datetime | Only show notifications updated after the given time. This is a timestamp in RFC 3339 format (optional)
before = '2013-10-20T19:20:30+01:00' # datetime | Only show notifications updated before the given time. This is a timestamp in RFC 3339 format (optional)
created_by = 'created_by_example' # str | filter (issues / pulls) created to (optional)
assigned_by = 'assigned_by_example' # str | filter (issues / pulls) assigned to (optional)
mentioned_by = 'mentioned_by_example' # str | filter (issues / pulls) mentioning to (optional)
page = 56 # int | page number of results to return (1-based) (optional)
limit = 56 # int | page size of results (optional)
try:
# List a repository's issues
api_response = api_instance.issue_list_issues(owner, repo, state=state, labels=labels, q=q, type=type, milestones=milestones, since=since, before=before, created_by=created_by, assigned_by=assigned_by, mentioned_by=mentioned_by, page=page, limit=limit)
pprint(api_response)
except ApiException as e:
print("Exception when calling IssueApi->issue_list_issues: %s\n" % e)| Name | Type | Description | Notes |
|---|---|---|---|
| owner | str | owner of the repo | |
| repo | str | name of the repo | |
| state | str | whether issue is open or closed | [optional] |
| labels | str | comma separated list of labels. Fetch only issues that have any of this labels. Non existent labels are discarded | [optional] |
| q | str | search string | [optional] |
| type | str | filter by type (issues / pulls) if set | [optional] |
| milestones | str | comma separated list of milestone names or ids. It uses names and fall back to ids. Fetch only issues that have any of this milestones. Non existent milestones are discarded | [optional] |
| since | datetime | Only show notifications updated after the given time. This is a timestamp in RFC 3339 format | [optional] |
| before | datetime | Only show notifications updated before the given time. This is a timestamp in RFC 3339 format | [optional] |
| created_by | str | filter (issues / pulls) created to | [optional] |
| assigned_by | str | filter (issues / pulls) assigned to | [optional] |
| mentioned_by | str | filter (issues / pulls) mentioning to | [optional] |
| page | int | page number of results to return (1-based) | [optional] |
| limit | int | page size of results | [optional] |
AccessToken, AuthorizationHeaderToken, BasicAuth, SudoHeader, SudoParam, TOTPHeader, Token
- Content-Type: application/json, text/plain
- Accept: application/json
[Back to top] [Back to API list] [Back to Model list] [Back to README]
list[Label] issue_list_labels(owner, repo, page=page, limit=limit)
Get all of a repository's labels
from __future__ import print_function
import time
import gitea_api
from gitea_api.rest import ApiException
from pprint import pprint
# Configure API key authorization: AccessToken
configuration = gitea_api.Configuration()
configuration.api_key['access_token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['access_token'] = 'Bearer'
# Configure API key authorization: AuthorizationHeaderToken
configuration = gitea_api.Configuration()
configuration.api_key['Authorization'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Authorization'] = 'Bearer'
# Configure HTTP basic authorization: BasicAuth
configuration = gitea_api.Configuration()
configuration.username = 'YOUR_USERNAME'
configuration.password = 'YOUR_PASSWORD'
# Configure API key authorization: SudoHeader
configuration = gitea_api.Configuration()
configuration.api_key['Sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Sudo'] = 'Bearer'
# Configure API key authorization: SudoParam
configuration = gitea_api.Configuration()
configuration.api_key['sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['sudo'] = 'Bearer'
# Configure API key authorization: TOTPHeader
configuration = gitea_api.Configuration()
configuration.api_key['X-GITEA-OTP'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['X-GITEA-OTP'] = 'Bearer'
# Configure API key authorization: Token
configuration = gitea_api.Configuration()
configuration.api_key['token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['token'] = 'Bearer'
# create an instance of the API class
api_instance = gitea_api.IssueApi(gitea_api.ApiClient(configuration))
owner = 'owner_example' # str | owner of the repo
repo = 'repo_example' # str | name of the repo
page = 56 # int | page number of results to return (1-based) (optional)
limit = 56 # int | page size of results (optional)
try:
# Get all of a repository's labels
api_response = api_instance.issue_list_labels(owner, repo, page=page, limit=limit)
pprint(api_response)
except ApiException as e:
print("Exception when calling IssueApi->issue_list_labels: %s\n" % e)| Name | Type | Description | Notes |
|---|---|---|---|
| owner | str | owner of the repo | |
| repo | str | name of the repo | |
| page | int | page number of results to return (1-based) | [optional] |
| limit | int | page size of results | [optional] |
AccessToken, AuthorizationHeaderToken, BasicAuth, SudoHeader, SudoParam, TOTPHeader, Token
- Content-Type: application/json, text/plain
- Accept: application/json
[Back to top] [Back to API list] [Back to Model list] [Back to README]
Reaction issue_post_comment_reaction(owner, repo, id, content=content)
Add a reaction to a comment of an issue
from __future__ import print_function
import time
import gitea_api
from gitea_api.rest import ApiException
from pprint import pprint
# Configure API key authorization: AccessToken
configuration = gitea_api.Configuration()
configuration.api_key['access_token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['access_token'] = 'Bearer'
# Configure API key authorization: AuthorizationHeaderToken
configuration = gitea_api.Configuration()
configuration.api_key['Authorization'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Authorization'] = 'Bearer'
# Configure HTTP basic authorization: BasicAuth
configuration = gitea_api.Configuration()
configuration.username = 'YOUR_USERNAME'
configuration.password = 'YOUR_PASSWORD'
# Configure API key authorization: SudoHeader
configuration = gitea_api.Configuration()
configuration.api_key['Sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Sudo'] = 'Bearer'
# Configure API key authorization: SudoParam
configuration = gitea_api.Configuration()
configuration.api_key['sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['sudo'] = 'Bearer'
# Configure API key authorization: TOTPHeader
configuration = gitea_api.Configuration()
configuration.api_key['X-GITEA-OTP'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['X-GITEA-OTP'] = 'Bearer'
# Configure API key authorization: Token
configuration = gitea_api.Configuration()
configuration.api_key['token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['token'] = 'Bearer'
# create an instance of the API class
api_instance = gitea_api.IssueApi(gitea_api.ApiClient(configuration))
owner = 'owner_example' # str | owner of the repo
repo = 'repo_example' # str | name of the repo
id = 789 # int | id of the comment to edit
content = gitea_api.EditReactionOption() # EditReactionOption | (optional)
try:
# Add a reaction to a comment of an issue
api_response = api_instance.issue_post_comment_reaction(owner, repo, id, content=content)
pprint(api_response)
except ApiException as e:
print("Exception when calling IssueApi->issue_post_comment_reaction: %s\n" % e)| Name | Type | Description | Notes |
|---|---|---|---|
| owner | str | owner of the repo | |
| repo | str | name of the repo | |
| id | int | id of the comment to edit | |
| content | EditReactionOption | [optional] |
AccessToken, AuthorizationHeaderToken, BasicAuth, SudoHeader, SudoParam, TOTPHeader, Token
- Content-Type: application/json
- Accept: application/json
[Back to top] [Back to API list] [Back to Model list] [Back to README]
Reaction issue_post_issue_reaction(owner, repo, index, content=content)
Add a reaction to an issue
from __future__ import print_function
import time
import gitea_api
from gitea_api.rest import ApiException
from pprint import pprint
# Configure API key authorization: AccessToken
configuration = gitea_api.Configuration()
configuration.api_key['access_token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['access_token'] = 'Bearer'
# Configure API key authorization: AuthorizationHeaderToken
configuration = gitea_api.Configuration()
configuration.api_key['Authorization'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Authorization'] = 'Bearer'
# Configure HTTP basic authorization: BasicAuth
configuration = gitea_api.Configuration()
configuration.username = 'YOUR_USERNAME'
configuration.password = 'YOUR_PASSWORD'
# Configure API key authorization: SudoHeader
configuration = gitea_api.Configuration()
configuration.api_key['Sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Sudo'] = 'Bearer'
# Configure API key authorization: SudoParam
configuration = gitea_api.Configuration()
configuration.api_key['sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['sudo'] = 'Bearer'
# Configure API key authorization: TOTPHeader
configuration = gitea_api.Configuration()
configuration.api_key['X-GITEA-OTP'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['X-GITEA-OTP'] = 'Bearer'
# Configure API key authorization: Token
configuration = gitea_api.Configuration()
configuration.api_key['token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['token'] = 'Bearer'
# create an instance of the API class
api_instance = gitea_api.IssueApi(gitea_api.ApiClient(configuration))
owner = 'owner_example' # str | owner of the repo
repo = 'repo_example' # str | name of the repo
index = 789 # int | index of the issue
content = gitea_api.EditReactionOption() # EditReactionOption | (optional)
try:
# Add a reaction to an issue
api_response = api_instance.issue_post_issue_reaction(owner, repo, index, content=content)
pprint(api_response)
except ApiException as e:
print("Exception when calling IssueApi->issue_post_issue_reaction: %s\n" % e)| Name | Type | Description | Notes |
|---|---|---|---|
| owner | str | owner of the repo | |
| repo | str | name of the repo | |
| index | int | index of the issue | |
| content | EditReactionOption | [optional] |
AccessToken, AuthorizationHeaderToken, BasicAuth, SudoHeader, SudoParam, TOTPHeader, Token
- Content-Type: application/json
- Accept: application/json
[Back to top] [Back to API list] [Back to Model list] [Back to README]
issue_remove_label(owner, repo, index, id)
Remove a label from an issue
from __future__ import print_function
import time
import gitea_api
from gitea_api.rest import ApiException
from pprint import pprint
# Configure API key authorization: AccessToken
configuration = gitea_api.Configuration()
configuration.api_key['access_token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['access_token'] = 'Bearer'
# Configure API key authorization: AuthorizationHeaderToken
configuration = gitea_api.Configuration()
configuration.api_key['Authorization'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Authorization'] = 'Bearer'
# Configure HTTP basic authorization: BasicAuth
configuration = gitea_api.Configuration()
configuration.username = 'YOUR_USERNAME'
configuration.password = 'YOUR_PASSWORD'
# Configure API key authorization: SudoHeader
configuration = gitea_api.Configuration()
configuration.api_key['Sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Sudo'] = 'Bearer'
# Configure API key authorization: SudoParam
configuration = gitea_api.Configuration()
configuration.api_key['sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['sudo'] = 'Bearer'
# Configure API key authorization: TOTPHeader
configuration = gitea_api.Configuration()
configuration.api_key['X-GITEA-OTP'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['X-GITEA-OTP'] = 'Bearer'
# Configure API key authorization: Token
configuration = gitea_api.Configuration()
configuration.api_key['token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['token'] = 'Bearer'
# create an instance of the API class
api_instance = gitea_api.IssueApi(gitea_api.ApiClient(configuration))
owner = 'owner_example' # str | owner of the repo
repo = 'repo_example' # str | name of the repo
index = 789 # int | index of the issue
id = 789 # int | id of the label to remove
try:
# Remove a label from an issue
api_instance.issue_remove_label(owner, repo, index, id)
except ApiException as e:
print("Exception when calling IssueApi->issue_remove_label: %s\n" % e)| Name | Type | Description | Notes |
|---|---|---|---|
| owner | str | owner of the repo | |
| repo | str | name of the repo | |
| index | int | index of the issue | |
| id | int | id of the label to remove |
void (empty response body)
AccessToken, AuthorizationHeaderToken, BasicAuth, SudoHeader, SudoParam, TOTPHeader, Token
- Content-Type: application/json, text/plain
- Accept: application/json
[Back to top] [Back to API list] [Back to Model list] [Back to README]
list[Label] issue_replace_labels(owner, repo, index, body=body)
Replace an issue's labels
from __future__ import print_function
import time
import gitea_api
from gitea_api.rest import ApiException
from pprint import pprint
# Configure API key authorization: AccessToken
configuration = gitea_api.Configuration()
configuration.api_key['access_token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['access_token'] = 'Bearer'
# Configure API key authorization: AuthorizationHeaderToken
configuration = gitea_api.Configuration()
configuration.api_key['Authorization'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Authorization'] = 'Bearer'
# Configure HTTP basic authorization: BasicAuth
configuration = gitea_api.Configuration()
configuration.username = 'YOUR_USERNAME'
configuration.password = 'YOUR_PASSWORD'
# Configure API key authorization: SudoHeader
configuration = gitea_api.Configuration()
configuration.api_key['Sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Sudo'] = 'Bearer'
# Configure API key authorization: SudoParam
configuration = gitea_api.Configuration()
configuration.api_key['sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['sudo'] = 'Bearer'
# Configure API key authorization: TOTPHeader
configuration = gitea_api.Configuration()
configuration.api_key['X-GITEA-OTP'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['X-GITEA-OTP'] = 'Bearer'
# Configure API key authorization: Token
configuration = gitea_api.Configuration()
configuration.api_key['token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['token'] = 'Bearer'
# create an instance of the API class
api_instance = gitea_api.IssueApi(gitea_api.ApiClient(configuration))
owner = 'owner_example' # str | owner of the repo
repo = 'repo_example' # str | name of the repo
index = 789 # int | index of the issue
body = gitea_api.IssueLabelsOption() # IssueLabelsOption | (optional)
try:
# Replace an issue's labels
api_response = api_instance.issue_replace_labels(owner, repo, index, body=body)
pprint(api_response)
except ApiException as e:
print("Exception when calling IssueApi->issue_replace_labels: %s\n" % e)| Name | Type | Description | Notes |
|---|---|---|---|
| owner | str | owner of the repo | |
| repo | str | name of the repo | |
| index | int | index of the issue | |
| body | IssueLabelsOption | [optional] |
AccessToken, AuthorizationHeaderToken, BasicAuth, SudoHeader, SudoParam, TOTPHeader, Token
- Content-Type: application/json
- Accept: application/json
[Back to top] [Back to API list] [Back to Model list] [Back to README]
issue_reset_time(owner, repo, index)
Reset a tracked time of an issue
from __future__ import print_function
import time
import gitea_api
from gitea_api.rest import ApiException
from pprint import pprint
# Configure API key authorization: AccessToken
configuration = gitea_api.Configuration()
configuration.api_key['access_token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['access_token'] = 'Bearer'
# Configure API key authorization: AuthorizationHeaderToken
configuration = gitea_api.Configuration()
configuration.api_key['Authorization'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Authorization'] = 'Bearer'
# Configure HTTP basic authorization: BasicAuth
configuration = gitea_api.Configuration()
configuration.username = 'YOUR_USERNAME'
configuration.password = 'YOUR_PASSWORD'
# Configure API key authorization: SudoHeader
configuration = gitea_api.Configuration()
configuration.api_key['Sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Sudo'] = 'Bearer'
# Configure API key authorization: SudoParam
configuration = gitea_api.Configuration()
configuration.api_key['sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['sudo'] = 'Bearer'
# Configure API key authorization: TOTPHeader
configuration = gitea_api.Configuration()
configuration.api_key['X-GITEA-OTP'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['X-GITEA-OTP'] = 'Bearer'
# Configure API key authorization: Token
configuration = gitea_api.Configuration()
configuration.api_key['token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['token'] = 'Bearer'
# create an instance of the API class
api_instance = gitea_api.IssueApi(gitea_api.ApiClient(configuration))
owner = 'owner_example' # str | owner of the repo
repo = 'repo_example' # str | name of the repo
index = 789 # int | index of the issue to add tracked time to
try:
# Reset a tracked time of an issue
api_instance.issue_reset_time(owner, repo, index)
except ApiException as e:
print("Exception when calling IssueApi->issue_reset_time: %s\n" % e)| Name | Type | Description | Notes |
|---|---|---|---|
| owner | str | owner of the repo | |
| repo | str | name of the repo | |
| index | int | index of the issue to add tracked time to |
void (empty response body)
AccessToken, AuthorizationHeaderToken, BasicAuth, SudoHeader, SudoParam, TOTPHeader, Token
- Content-Type: application/json
- Accept: application/json
[Back to top] [Back to API list] [Back to Model list] [Back to README]
list[Issue] issue_search_issues(state=state, labels=labels, milestones=milestones, q=q, priority_repo_id=priority_repo_id, type=type, since=since, before=before, assigned=assigned, created=created, mentioned=mentioned, review_requested=review_requested, page=page, limit=limit)
Search for issues across the repositories that the user has access to
from __future__ import print_function
import time
import gitea_api
from gitea_api.rest import ApiException
from pprint import pprint
# Configure API key authorization: AccessToken
configuration = gitea_api.Configuration()
configuration.api_key['access_token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['access_token'] = 'Bearer'
# Configure API key authorization: AuthorizationHeaderToken
configuration = gitea_api.Configuration()
configuration.api_key['Authorization'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Authorization'] = 'Bearer'
# Configure HTTP basic authorization: BasicAuth
configuration = gitea_api.Configuration()
configuration.username = 'YOUR_USERNAME'
configuration.password = 'YOUR_PASSWORD'
# Configure API key authorization: SudoHeader
configuration = gitea_api.Configuration()
configuration.api_key['Sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Sudo'] = 'Bearer'
# Configure API key authorization: SudoParam
configuration = gitea_api.Configuration()
configuration.api_key['sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['sudo'] = 'Bearer'
# Configure API key authorization: TOTPHeader
configuration = gitea_api.Configuration()
configuration.api_key['X-GITEA-OTP'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['X-GITEA-OTP'] = 'Bearer'
# Configure API key authorization: Token
configuration = gitea_api.Configuration()
configuration.api_key['token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['token'] = 'Bearer'
# create an instance of the API class
api_instance = gitea_api.IssueApi(gitea_api.ApiClient(configuration))
state = 'state_example' # str | whether issue is open or closed (optional)
labels = 'labels_example' # str | comma separated list of labels. Fetch only issues that have any of this labels. Non existent labels are discarded (optional)
milestones = 'milestones_example' # str | comma separated list of milestone names. Fetch only issues that have any of this milestones. Non existent are discarded (optional)
q = 'q_example' # str | search string (optional)
priority_repo_id = 789 # int | repository to prioritize in the results (optional)
type = 'type_example' # str | filter by type (issues / pulls) if set (optional)
since = '2013-10-20T19:20:30+01:00' # datetime | Only show notifications updated after the given time. This is a timestamp in RFC 3339 format (optional)
before = '2013-10-20T19:20:30+01:00' # datetime | Only show notifications updated before the given time. This is a timestamp in RFC 3339 format (optional)
assigned = true # bool | filter (issues / pulls) assigned to you, default is false (optional)
created = true # bool | filter (issues / pulls) created by you, default is false (optional)
mentioned = true # bool | filter (issues / pulls) mentioning you, default is false (optional)
review_requested = true # bool | filter pulls requesting your review, default is false (optional)
page = 56 # int | page number of results to return (1-based) (optional)
limit = 56 # int | page size of results (optional)
try:
# Search for issues across the repositories that the user has access to
api_response = api_instance.issue_search_issues(state=state, labels=labels, milestones=milestones, q=q, priority_repo_id=priority_repo_id, type=type, since=since, before=before, assigned=assigned, created=created, mentioned=mentioned, review_requested=review_requested, page=page, limit=limit)
pprint(api_response)
except ApiException as e:
print("Exception when calling IssueApi->issue_search_issues: %s\n" % e)| Name | Type | Description | Notes |
|---|---|---|---|
| state | str | whether issue is open or closed | [optional] |
| labels | str | comma separated list of labels. Fetch only issues that have any of this labels. Non existent labels are discarded | [optional] |
| milestones | str | comma separated list of milestone names. Fetch only issues that have any of this milestones. Non existent are discarded | [optional] |
| q | str | search string | [optional] |
| priority_repo_id | int | repository to prioritize in the results | [optional] |
| type | str | filter by type (issues / pulls) if set | [optional] |
| since | datetime | Only show notifications updated after the given time. This is a timestamp in RFC 3339 format | [optional] |
| before | datetime | Only show notifications updated before the given time. This is a timestamp in RFC 3339 format | [optional] |
| assigned | bool | filter (issues / pulls) assigned to you, default is false | [optional] |
| created | bool | filter (issues / pulls) created by you, default is false | [optional] |
| mentioned | bool | filter (issues / pulls) mentioning you, default is false | [optional] |
| review_requested | bool | filter pulls requesting your review, default is false | [optional] |
| page | int | page number of results to return (1-based) | [optional] |
| limit | int | page size of results | [optional] |
AccessToken, AuthorizationHeaderToken, BasicAuth, SudoHeader, SudoParam, TOTPHeader, Token
- Content-Type: application/json, text/plain
- Accept: application/json
[Back to top] [Back to API list] [Back to Model list] [Back to README]
issue_start_stop_watch(owner, repo, index)
Start stopwatch on an issue.
from __future__ import print_function
import time
import gitea_api
from gitea_api.rest import ApiException
from pprint import pprint
# Configure API key authorization: AccessToken
configuration = gitea_api.Configuration()
configuration.api_key['access_token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['access_token'] = 'Bearer'
# Configure API key authorization: AuthorizationHeaderToken
configuration = gitea_api.Configuration()
configuration.api_key['Authorization'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Authorization'] = 'Bearer'
# Configure HTTP basic authorization: BasicAuth
configuration = gitea_api.Configuration()
configuration.username = 'YOUR_USERNAME'
configuration.password = 'YOUR_PASSWORD'
# Configure API key authorization: SudoHeader
configuration = gitea_api.Configuration()
configuration.api_key['Sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Sudo'] = 'Bearer'
# Configure API key authorization: SudoParam
configuration = gitea_api.Configuration()
configuration.api_key['sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['sudo'] = 'Bearer'
# Configure API key authorization: TOTPHeader
configuration = gitea_api.Configuration()
configuration.api_key['X-GITEA-OTP'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['X-GITEA-OTP'] = 'Bearer'
# Configure API key authorization: Token
configuration = gitea_api.Configuration()
configuration.api_key['token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['token'] = 'Bearer'
# create an instance of the API class
api_instance = gitea_api.IssueApi(gitea_api.ApiClient(configuration))
owner = 'owner_example' # str | owner of the repo
repo = 'repo_example' # str | name of the repo
index = 789 # int | index of the issue to create the stopwatch on
try:
# Start stopwatch on an issue.
api_instance.issue_start_stop_watch(owner, repo, index)
except ApiException as e:
print("Exception when calling IssueApi->issue_start_stop_watch: %s\n" % e)| Name | Type | Description | Notes |
|---|---|---|---|
| owner | str | owner of the repo | |
| repo | str | name of the repo | |
| index | int | index of the issue to create the stopwatch on |
void (empty response body)
AccessToken, AuthorizationHeaderToken, BasicAuth, SudoHeader, SudoParam, TOTPHeader, Token
- Content-Type: application/json
- Accept: application/json
[Back to top] [Back to API list] [Back to Model list] [Back to README]
issue_stop_stop_watch(owner, repo, index)
Stop an issue's existing stopwatch.
from __future__ import print_function
import time
import gitea_api
from gitea_api.rest import ApiException
from pprint import pprint
# Configure API key authorization: AccessToken
configuration = gitea_api.Configuration()
configuration.api_key['access_token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['access_token'] = 'Bearer'
# Configure API key authorization: AuthorizationHeaderToken
configuration = gitea_api.Configuration()
configuration.api_key['Authorization'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Authorization'] = 'Bearer'
# Configure HTTP basic authorization: BasicAuth
configuration = gitea_api.Configuration()
configuration.username = 'YOUR_USERNAME'
configuration.password = 'YOUR_PASSWORD'
# Configure API key authorization: SudoHeader
configuration = gitea_api.Configuration()
configuration.api_key['Sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Sudo'] = 'Bearer'
# Configure API key authorization: SudoParam
configuration = gitea_api.Configuration()
configuration.api_key['sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['sudo'] = 'Bearer'
# Configure API key authorization: TOTPHeader
configuration = gitea_api.Configuration()
configuration.api_key['X-GITEA-OTP'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['X-GITEA-OTP'] = 'Bearer'
# Configure API key authorization: Token
configuration = gitea_api.Configuration()
configuration.api_key['token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['token'] = 'Bearer'
# create an instance of the API class
api_instance = gitea_api.IssueApi(gitea_api.ApiClient(configuration))
owner = 'owner_example' # str | owner of the repo
repo = 'repo_example' # str | name of the repo
index = 789 # int | index of the issue to stop the stopwatch on
try:
# Stop an issue's existing stopwatch.
api_instance.issue_stop_stop_watch(owner, repo, index)
except ApiException as e:
print("Exception when calling IssueApi->issue_stop_stop_watch: %s\n" % e)| Name | Type | Description | Notes |
|---|---|---|---|
| owner | str | owner of the repo | |
| repo | str | name of the repo | |
| index | int | index of the issue to stop the stopwatch on |
void (empty response body)
AccessToken, AuthorizationHeaderToken, BasicAuth, SudoHeader, SudoParam, TOTPHeader, Token
- Content-Type: application/json
- Accept: application/json
[Back to top] [Back to API list] [Back to Model list] [Back to README]
list[User] issue_subscriptions(owner, repo, index, page=page, limit=limit)
Get users who subscribed on an issue.
from __future__ import print_function
import time
import gitea_api
from gitea_api.rest import ApiException
from pprint import pprint
# Configure API key authorization: AccessToken
configuration = gitea_api.Configuration()
configuration.api_key['access_token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['access_token'] = 'Bearer'
# Configure API key authorization: AuthorizationHeaderToken
configuration = gitea_api.Configuration()
configuration.api_key['Authorization'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Authorization'] = 'Bearer'
# Configure HTTP basic authorization: BasicAuth
configuration = gitea_api.Configuration()
configuration.username = 'YOUR_USERNAME'
configuration.password = 'YOUR_PASSWORD'
# Configure API key authorization: SudoHeader
configuration = gitea_api.Configuration()
configuration.api_key['Sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Sudo'] = 'Bearer'
# Configure API key authorization: SudoParam
configuration = gitea_api.Configuration()
configuration.api_key['sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['sudo'] = 'Bearer'
# Configure API key authorization: TOTPHeader
configuration = gitea_api.Configuration()
configuration.api_key['X-GITEA-OTP'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['X-GITEA-OTP'] = 'Bearer'
# Configure API key authorization: Token
configuration = gitea_api.Configuration()
configuration.api_key['token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['token'] = 'Bearer'
# create an instance of the API class
api_instance = gitea_api.IssueApi(gitea_api.ApiClient(configuration))
owner = 'owner_example' # str | owner of the repo
repo = 'repo_example' # str | name of the repo
index = 789 # int | index of the issue
page = 56 # int | page number of results to return (1-based) (optional)
limit = 56 # int | page size of results (optional)
try:
# Get users who subscribed on an issue.
api_response = api_instance.issue_subscriptions(owner, repo, index, page=page, limit=limit)
pprint(api_response)
except ApiException as e:
print("Exception when calling IssueApi->issue_subscriptions: %s\n" % e)| Name | Type | Description | Notes |
|---|---|---|---|
| owner | str | owner of the repo | |
| repo | str | name of the repo | |
| index | int | index of the issue | |
| page | int | page number of results to return (1-based) | [optional] |
| limit | int | page size of results | [optional] |
AccessToken, AuthorizationHeaderToken, BasicAuth, SudoHeader, SudoParam, TOTPHeader, Token
- Content-Type: application/json
- Accept: application/json
[Back to top] [Back to API list] [Back to Model list] [Back to README]
list[TrackedTime] issue_tracked_times(owner, repo, index, user=user, since=since, before=before, page=page, limit=limit)
List an issue's tracked times
from __future__ import print_function
import time
import gitea_api
from gitea_api.rest import ApiException
from pprint import pprint
# Configure API key authorization: AccessToken
configuration = gitea_api.Configuration()
configuration.api_key['access_token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['access_token'] = 'Bearer'
# Configure API key authorization: AuthorizationHeaderToken
configuration = gitea_api.Configuration()
configuration.api_key['Authorization'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Authorization'] = 'Bearer'
# Configure HTTP basic authorization: BasicAuth
configuration = gitea_api.Configuration()
configuration.username = 'YOUR_USERNAME'
configuration.password = 'YOUR_PASSWORD'
# Configure API key authorization: SudoHeader
configuration = gitea_api.Configuration()
configuration.api_key['Sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['Sudo'] = 'Bearer'
# Configure API key authorization: SudoParam
configuration = gitea_api.Configuration()
configuration.api_key['sudo'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['sudo'] = 'Bearer'
# Configure API key authorization: TOTPHeader
configuration = gitea_api.Configuration()
configuration.api_key['X-GITEA-OTP'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['X-GITEA-OTP'] = 'Bearer'
# Configure API key authorization: Token
configuration = gitea_api.Configuration()
configuration.api_key['token'] = 'YOUR_API_KEY'
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['token'] = 'Bearer'
# create an instance of the API class
api_instance = gitea_api.IssueApi(gitea_api.ApiClient(configuration))
owner = 'owner_example' # str | owner of the repo
repo = 'repo_example' # str | name of the repo
index = 789 # int | index of the issue
user = 'user_example' # str | optional filter by user (available for issue managers) (optional)
since = '2013-10-20T19:20:30+01:00' # datetime | Only show times updated after the given time. This is a timestamp in RFC 3339 format (optional)
before = '2013-10-20T19:20:30+01:00' # datetime | Only show times updated before the given time. This is a timestamp in RFC 3339 format (optional)
page = 56 # int | page number of results to return (1-based) (optional)
limit = 56 # int | page size of results (optional)
try:
# List an issue's tracked times
api_response = api_instance.issue_tracked_times(owner, repo, index, user=user, since=since, before=before, page=page, limit=limit)
pprint(api_response)
except ApiException as e:
print("Exception when calling IssueApi->issue_tracked_times: %s\n" % e)| Name | Type | Description | Notes |
|---|---|---|---|
| owner | str | owner of the repo | |
| repo | str | name of the repo | |
| index | int | index of the issue | |
| user | str | optional filter by user (available for issue managers) | [optional] |
| since | datetime | Only show times updated after the given time. This is a timestamp in RFC 3339 format | [optional] |
| before | datetime | Only show times updated before the given time. This is a timestamp in RFC 3339 format | [optional] |
| page | int | page number of results to return (1-based) | [optional] |
| limit | int | page size of results | [optional] |
AccessToken, AuthorizationHeaderToken, BasicAuth, SudoHeader, SudoParam, TOTPHeader, Token
- Content-Type: application/json, text/plain
- Accept: application/json
[Back to top] [Back to API list] [Back to Model list] [Back to README]