Skip to content

andres-garcia-alves/electronics-vibratory-tumbler

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

15 Commits
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Vibratory-Tumbler

Arduino code for a time-controlled vibratory tumbler.

 

This project use the following electronic components:

  • 1 x Arduino UNO / Nano v3
  • 4 x push-button
  • 1 x TM1637 IC (4 digit 7 segment display)
  • 1 x relay module
  • 1 x active buzzer
  • 1 x 200 ohm resistor

Other components:

  • Server cooler (12cms, 1A or more)
  • Big Screw (to unbalance the cooler blades and generate the vibration)
  • Misc: plastic container, screws, springs, some wood for the electronic box, paint ...

The circuit:

  • Time increase push-button attached to pin 2
  • Time decrease push-button attached to pin 3
  • Start push-button attached to pin 4
  • Pause/Stop push-button attached to pin 5
  • TM1637 display attached to pins 7 & 8
  • Relay module attached to pin 10
  • Buzzer attached to pin 12 through a 200 ohm resistor

Notes:

  • The timer scale can be adjusted between minutes/seconds using the SCALE constant.

 

Screenshots

Materials Proof Of Concept
Proof Of Concept Tumbler Structure
Tumbler Structure Tumbler Structure
Electronic Protoboard Electronic Protoboard
Electronic Soldering Proyect Final

See 'Rescources' sub-folder for more pictures & videos of the project.

 

Version History

v1.0 (2021.05.24) - Initial release.
v1.1 (2021.05.25) - Changing pins for better disposition on Arduino Nano.

 

This source code is licensed under GPL v3.0
Please send me your feedback about this project: [email protected]

Releases

No releases published

Packages

No packages published

Languages