Skip to content

🐳 Dockerized WES pipeline for variants identification in mathced tumor-normal samples

Notifications You must be signed in to change notification settings

alexcoppe/iWhale

Repository files navigation

iWhale

Dockerized Whole Exome Sequencing (WES) pipeline

A pipeline for Whole Exome Sequencing (WES) variants identification in mathced tumor-normal samples. It runs into a Docker container, ready to be downloaded and used on any operating system supported by Docker.

All the steps of the pipeline and their dependencies are controlled by SCons so that in case of any stop, like killing by error or even shutting down the computer, it will automatically resume the analysis from the last run process.

Three variant calling softwares are used by the pipeline: Mutect2 , VarScan2, and Strelka2 and the user is allowed to choose which to use and change their default settings.

It runs on both genomes versions: GRCh37 and GRCh38 (beta version).

A pdf manual for iWhale is available here

An image of the iWhale pipeline diagram is available here

iWhale

How to cite iWhale? 📘

Binatti A, Bresolin S, Bortoluzzi S, Coppe A. iWhale: A Computational Pipeline Based on Docker and SCons for Detection and Annotation of Somatic Variants in Cancer WES. Briefings in Bioinformics. 2020 May 20:bbaa065. doi: 10.1093/bib/bbaa065.

iWhale data preparation

Download iWhale from Docker Hub:

docker pull alexcoppe/iwhale

The working directory must contain the following elements:

  • two directories for each sample: one for tumor and the other one for control samples. Each directory must include two fastq files
  • a text file called tumor_control_samples.txt
  • a python file called configuration.py

The working directory must not contain other directories except the ones of the samples indicated above

Sample directories structure

Each sample must be in its own directory containing the two paired-end gz-compressed fastq files. The files must be called:

  • 1.fastq.gz
  • 2.fastq.gz

tumor_control_samples.txt file structure

The file tumor_control_samples.txt is a simple text file organized by two columns separated by tab: in the first column there are tumor directories names and in the second one the matched control directories names

tumor_sample1 control_sample1
tumor_sample2 control_sample2
...

configuration.py file structure

The configuration.py file is essential. It is used to set parameters of the tools used by iWhale. All the possible parameters that you can set are gathered and explained in this file: configuration.py.

The configuration.py file is set for GRCh38 genome analyses.

For GRCh37 you can use a configuration.py file with only e parameter set (exomeRegions): the exome regions in bed format, which is a very important parameter (the only one you must have to specify for GRCh37 version of the genome). To do it use the exomeRegions parameter which default value is:

exomeRegions = "exome_regions.bed"

You have to change it to the exome interval used by your sequencing experiment (SureSelect_Human_All_Exon_V5 in the example below).

exomeRegions = "SureSelect_Human_All_Exon_V5.bed"

iWhale also needs the gziped version (made by bgzip) of the file and the .tbi index done using with these parameters (you need tabix and bgzip commands):

bgzip -c SureSelect_Human_All_Exon_V5.bed > SureSelect_Human_All_Exon_V5.bed.gz
tabix -p bed -S 3  SureSelect_Human_All_Exon_V5.bed.gz

Every MuTect2 and VarScan2 parameters can be set by using the configuration.py file. For example:

mutect2Parameters = "--normal-lod 2.5 --native-pair-hmm-threads 6"
varScanParameters = "--tumor-purity 2 --p-value 0.05"

Annotation data download

Annotation data, except COSMIC files, can be downloaded from compgen.bio.unipd.it.

GRCh37 genome

For the GRCh37 genome this are the links:

GRCh38 genome (Beta Version)

For the GRCh38 genome this are the links:

Decompression takes a while. The version of used databases are listed below ("Databases currently used" section).

COSMIC annotation files

COSMIC files, which are free only for academic researchers, can be downloaded from https://cancer.sanger.ac.uk/cosmic/download after sign up and login. The needed files are:

  • CosmicCodingMuts.vcf.gz
  • cancer_gene_census.csv
  • CosmicCodingMuts.vcf.gz.tbi

**Download the right version (GRCh38 or GRCh37) based on the data you are using The CosmicCodingMuts.vcf.gz.tbi should be made by the user. See the Testing the Docker image section to see how to make it.

Launching iWhale

The docker's run command is used to mention that we want to create an instance of an image. The image is then called a container. This is the command to launch an iWhale container:

docker run --rm -it --name iwhalexp -v $(pwd):/working -v /home/user/databases:/annotations alexcoppe/iwhale
  • --rm removes the container (it is optional)
  • -it used for interactive processes (like a shell)
  • --name used to name the container. If you do not assign a container name with the --name option, then the daemon generates a random string name for you
  • -v used to share the two folders that iWhale needs: the working directory (used in the example the current directory by $(pwd)) and the folder including the databases files (in the example, /home/user/databases)
  • iwhale is the name of the docker image to be run
  • iwhalexp is the name of the iWhale docker container while iwhale is the name of the image

Testing the Docker image

You can download a small random sample (107M) in tgz format or as a zip file for a fast testing of iWhale. It contains 1 simulated small tumor (tumor_sample) and 1 control sample (control_sample), a configuration.py file and a tumor_control_samples.txt files ready. Then do the following steps:

  1. Install Docker Community Edition (CE) in your computer. Instructions and downloading links are here: macOS, Windows and Ubuntu

  2. Download and install the iWhale images with this command:

docker pull alexcoppe/iwhale
  1. Download and decompress annotations.tar.gz or annotations.zip for GRCh37 or annotations_GRCh38.tar.gz for GRCh38

  2. Download the CosmicCodingMuts.vcf.gz and cancer_gene_census.csv files from COSMIC version 37 or version 38 of the genome using your credentials. You need to create a .tbi file from the CosmicCodingMuts.vcf.gz with these commands (needed the tabix and bgzip softwares from Samtools):

gunzip CosmicCodingMuts.vcf.gz
bgzip -c CosmicCodingMuts.vcf > CosmicCodingMuts.vcf.gz
tabix -p vcf CosmicCodingMuts.vcf.gz
  1. Finally launch iWhale from the iwhale_example directory with a command similar to the following one. Just remember that the path indicated in the command, /path_to_user_annotations_directory, should be changed to the real path were you decompressed the annotations.tar.gz file, for example /home/user/annotations:

Version GRCh37:

docker run --rm -it --name iwhalexp -v $(pwd):/working -v /path_to_user_annotations_directory_v37:/annotations alexcoppe/iwhale 

Version GRCh38:

Download the configuration.py file which is required to run the GRCh38, put it in the analyses directory and run:

docker run --rm -it --name iwhalexp -v $(pwd):/working -v /path_to_user_annotations_directory_38:/annotations alexcoppe/iwhale 

Paths in Windows should be written differently. For example:

docker run --rm -it --name iwhalexp -v c:/Users:/working -v c:/Users/annotations:/annotations alexcoppe/iwhale 

Read Get started with Docker for Windows for a tutorial on using Docker on Windows.

Re-launching iWhale

In case of iWhale accidentally stopped, you have to re-launch the same Docker container that was running before stopping. To do this use the following command:

docker start -a iwhalexp

Obviously the name iwhalexp is the same of used by the docker run used in the "Launching iWhale" above section

Output

The final results are obtained by merging the VCFs produced by each chosen variant caller (MuTect2, VarScan2,Strelka2) and are located in the Combined_VCFs_by_sample directory included in the VCF directory. For each matched-samples pair, the called snps and indels are put into two different vcf files. In particular their name will be tumor_control_merged_typeofvariants.vcf. The index files of VCFs are also present in the directory. Here is an example of results:

[root@iwhale Combined_VCFs_by_sample] ls -l

-rw-r--r-- 1 root root 46578 Mar 15 15:24 5_6_merged_indels.vcf
-rw-r--r-- 1 root root  1477 Mar 15 15:24 5_6_merged_indels.vcf.idx
-rw-r--r-- 1 root root 54011 Mar 15 15:24 5_6_merged_snps.vcf
-rw-r--r-- 1 root root  3354 Mar 15 15:24 5_6_merged_snps.vcf.idx
-rw-r--r-- 1 root root 46578 Mar 15 15:25 7_8_merged_indels.vcf
-rw-r--r-- 1 root root  1477 Mar 15 15:25 7_8_merged_indels.vcf.idx
-rw-r--r-- 1 root root 54011 Mar 15 15:25 7_8_merged_snps.vcf
-rw-r--r-- 1 root root  3354 Mar 15 15:25 7_8_merged_snps.vcf.idx

The VCFs produced by each variant caller are present in the upper directory called VCF. The Variants directory contains the intermediate files produced by the pipeline divided by software and pair of matched-samples directories.

Software versions currently used

Program Description Version
Burrows-Wheeler Aligner (BWA) BWA is a software package for mapping low-divergent sequences against a large reference genome. 0.7.17
Picard A set of command line tools for manipulating high-throughput sequencing (HTS) data and formats. 2.17.11
GATK4 GATK4 is the first and only open-source software package that covers all major variant classes for both germline and cancer genome analysis. 4.0.6.0
GATK3 A variety of tools with a primary focus on variant discovery and genotyping. 3.8-1
Strelka2 Strelka2 is a fast and accurate small variant caller optimized for analysis of germline variation in small cohorts and somatic variation in tumor/normal sample pairs. 2.9.2
VarScan VarScan is a platform-independent software tool developed at the Genome Institute at Washington University to detect variants in NGS data. 2.4.2
SnpEff Genomic variant annotations and functional effect prediction toolbox. 4_3t
bedtools Collectively, the bedtools utilities are a swiss-army knife of tools for a wide-range of genomics analysis tasks. 2.17.0

Databases currently used

iWhale uses databases and sequences indicated in the table below.

GRCh37

Sequences or Databases Description Version
Human genome database Feb. 2009 assembly of the human genome (hg19,GRCh37 Genome Reference Consortium Human Reference 37 hg19 or GRCh37
dbSNP dbSNP contains human single nucleotide variations, microsatellites, and small-scale insertions and deletions All_20180418.vcf.gz
gnomAD The Genome Aggregation Database (gnomAD), developed by an international coalition of investigators, with the goal of aggregating and harmonizing both exome and genome sequencing data from a wide variety of large-scale sequencing projects 2018-05-22
SnpEff GRCh37 SnpEff annotation for the human genome reference genome GRCh37) GRCh37
ClinVar ClinVar aggregates information about genomic variation and its relationship to human health 20190311
COSMIC COSMIC, the Catalogue Of Somatic Mutations In Cancer, is the world's largest and most comprehensive resource for exploring the impact of somatic mutations in human cancer v89

GRCh38

Sequences or Databases Description Version
Human genome database GRCh38 version of the human genome hg19 or GRCh37
dbSNP dbSNP contains human single nucleotide variations, microsatellites, and small-scale insertions and deletions All_20180418.vcf.gz
gnomAD The Genome Aggregation Database (gnomAD), developed by an international coalition of investigators, with the goal of aggregating and harmonizing both exome and genome sequencing data from a wide variety of large-scale sequencing projects 2.1
SnpEff GRCh38 SnpEff annotation for the human genome reference genome GRCh38) GGRCh38.86
ClinVar ClinVar aggregates information about genomic variation and its relationship to human health 20200316
COSMIC COSMIC, the Catalogue Of Somatic Mutations In Cancer, is the world's largest and most comprehensive resource for exploring the impact of somatic mutations in human cancer v90

Getting database files and indexing by yourself (only for the braves)

All commands are launch from the directory containing the downloaded data. Many of the command take a LOT OF TIME to conclude.

Download and setting of reference genome

The reference genome can be downloaded from ftp://ftp.ensembl.org/pub/release-99/fasta/homo_sapiens/dna/ by using these commands:

wget ftp://ftp.ensembl.org/pub/release-99/fasta/homo_sapiens/dna/Homo_sapiens.GRCh38.dna_sm.chromosome.1.fa.gz
wget ftp://ftp.ensembl.org/pub/release-99/fasta/homo_sapiens/dna/Homo_sapiens.GRCh38.dna_sm.chromosome.2.fa.gz
wget ftp://ftp.ensembl.org/pub/release-99/fasta/homo_sapiens/dna/Homo_sapiens.GRCh38.dna_sm.chromosome.3.fa.gz
wget ftp://ftp.ensembl.org/pub/release-99/fasta/homo_sapiens/dna/Homo_sapiens.GRCh38.dna_sm.chromosome.4.fa.gz
wget ftp://ftp.ensembl.org/pub/release-99/fasta/homo_sapiens/dna/Homo_sapiens.GRCh38.dna_sm.chromosome.5.fa.gz
wget ftp://ftp.ensembl.org/pub/release-99/fasta/homo_sapiens/dna/Homo_sapiens.GRCh38.dna_sm.chromosome.6.fa.gz
wget ftp://ftp.ensembl.org/pub/release-99/fasta/homo_sapiens/dna/Homo_sapiens.GRCh38.dna_sm.chromosome.7.fa.gz
wget ftp://ftp.ensembl.org/pub/release-99/fasta/homo_sapiens/dna/Homo_sapiens.GRCh38.dna_sm.chromosome.8.fa.gz
wget ftp://ftp.ensembl.org/pub/release-99/fasta/homo_sapiens/dna/Homo_sapiens.GRCh38.dna_sm.chromosome.9.fa.gz
wget ftp://ftp.ensembl.org/pub/release-99/fasta/homo_sapiens/dna/Homo_sapiens.GRCh38.dna_sm.chromosome.10.fa.gz
wget ftp://ftp.ensembl.org/pub/release-99/fasta/homo_sapiens/dna/Homo_sapiens.GRCh38.dna_sm.chromosome.11.fa.gz
wget ftp://ftp.ensembl.org/pub/release-99/fasta/homo_sapiens/dna/Homo_sapiens.GRCh38.dna_sm.chromosome.12.fa.gz
wget ftp://ftp.ensembl.org/pub/release-99/fasta/homo_sapiens/dna/Homo_sapiens.GRCh38.dna_sm.chromosome.13.fa.gz
wget ftp://ftp.ensembl.org/pub/release-99/fasta/homo_sapiens/dna/Homo_sapiens.GRCh38.dna_sm.chromosome.14.fa.gz
wget ftp://ftp.ensembl.org/pub/release-99/fasta/homo_sapiens/dna/Homo_sapiens.GRCh38.dna_sm.chromosome.15.fa.gz
wget ftp://ftp.ensembl.org/pub/release-99/fasta/homo_sapiens/dna/Homo_sapiens.GRCh38.dna_sm.chromosome.16.fa.gz
wget ftp://ftp.ensembl.org/pub/release-99/fasta/homo_sapiens/dna/Homo_sapiens.GRCh38.dna_sm.chromosome.17.fa.gz
wget ftp://ftp.ensembl.org/pub/release-99/fasta/homo_sapiens/dna/Homo_sapiens.GRCh38.dna_sm.chromosome.18.fa.gz
wget ftp://ftp.ensembl.org/pub/release-99/fasta/homo_sapiens/dna/Homo_sapiens.GRCh38.dna_sm.chromosome.19.fa.gz
wget ftp://ftp.ensembl.org/pub/release-99/fasta/homo_sapiens/dna/Homo_sapiens.GRCh38.dna_sm.chromosome.20.fa.gz
wget ftp://ftp.ensembl.org/pub/release-99/fasta/homo_sapiens/dna/Homo_sapiens.GRCh38.dna_sm.chromosome.21.fa.gz
wget ftp://ftp.ensembl.org/pub/release-99/fasta/homo_sapiens/dna/Homo_sapiens.GRCh38.dna_sm.chromosome.22.fa.gz
wget ftp://ftp.ensembl.org/pub/release-99/fasta/homo_sapiens/dna/Homo_sapiens.GRCh38.dna_sm.chromosome.X.fa.gz
wget ftp://ftp.ensembl.org/pub/release-99/fasta/homo_sapiens/dna/Homo_sapiens.GRCh38.dna_sm.chromosome.Y.fa.gz
wget ftp://ftp.ensembl.org/pub/release-99/fasta/homo_sapiens/dna/Homo_sapiens.GRCh38.dna_sm.chromosome.MT.fa.gz

The reference genome of Epstein-Barr virus (EBV) is available in FASTA format from https://www.ncbi.nlm.nih.gov/nuccore/AJ507799.2?report=fasta

Compress EBV reference genome into a .gz file


gzip EBV_reference_genome.fa

Join all chromosomes into one big FASTA file with all human genome in it from FASTA headers

zcat Homo_sapiens.GRCh38.dna_sm.chromosome.1.fa.gz Homo_sapiens.GRCh38.dna_sm.chromosome.2.fa.gz \
Homo_sapiens.GRCh38.dna_sm.chromosome.3.fa.gz Homo_sapiens.GRCh38.dna_sm.chromosome.4.fa.gz \
Homo_sapiens.GRCh38.dna_sm.chromosome.5.fa.gz Homo_sapiens.GRCh38.dna_sm.chromosome.6.fa.gz \
Homo_sapiens.GRCh38.dna_sm.chromosome.7.fa.gz Homo_sapiens.GRCh38.dna_sm.chromosome.8.fa.gz \
Homo_sapiens.GRCh38.dna_sm.chromosome.9.fa.gz Homo_sapiens.GRCh38.dna_sm.chromosome.10.fa.gz \
Homo_sapiens.GRCh38.dna_sm.chromosome.11.fa.gz Homo_sapiens.GRCh38.dna_sm.chromosome.12.fa.gz \
Homo_sapiens.GRCh38.dna_sm.chromosome.13.fa.gz Homo_sapiens.GRCh38.dna_sm.chromosome.14.fa.gz \
Homo_sapiens.GRCh38.dna_sm.chromosome.15.fa.gz Homo_sapiens.GRCh38.dna_sm.chromosome.16.fa.gz \
Homo_sapiens.GRCh38.dna_sm.chromosome.17.fa.gz Homo_sapiens.GRCh38.dna_sm.chromosome.18.fa.gz \
Homo_sapiens.GRCh38.dna_sm.chromosome.19.fa.gz Homo_sapiens.GRCh38.dna_sm.chromosome.20.fa.gz \
Homo_sapiens.GRCh38.dna_sm.chromosome.21.fa.gz Homo_sapiens.GRCh38.dna_sm.chromosome.22.fa.gz \
Homo_sapiens.GRCh38.dna_sm.chromosome.X.fa.gz Homo_sapiens.GRCh38.dna_sm.chromosome.Y.fa.gz \
Homo_sapiens.GRCh38.dna_sm.chromosome.MT.fa.gz EBV_reference_genome.fa.gz > reference.fa

BWA indexing of Human genome.

It produces many files:

  • reference.fa.amb
  • reference.fa.ann
  • reference.fa.bwt
  • reference.fa.pac
  • reference.fa.sa

This step takes a lot of time:

bwa index reference.fa

Index of the FASTA file with human genome data for picard.

The produced files is:

  • reference.dict
java -jar ~/local/picard.jar CreateSequenceDictionary R=reference.fa O=reference.dict

Creation of the reference.fa.fai index.

The produced files is:

  • reference.fa.fai
samtools faidx reference.fa

dbSNP download:

wget ftp://ftp.ncbi.nih.gov/snp/organisms/human_9606_b151_GRCh38p7/VCF/All_20180418.vcf.gz 

Removing chr from dbSNP downloaded file (from chr1 to 1)

gunzip All_20180418.vcf.gz
cat All_20180418.vcf | sed 's/>chr/>/' > All_20180418_nochr.vcf

Removing AA field in INFO from dbSNP file with SnpSift

The new version of dbSNP included AA field in INFO with special characters not allowed in VCF files

java -jar SnpSift.jar rmInfo All_20180418_nochr.vcf AA > All_20180418_noAA.vcf
mv All_20180418_noAA.vcf All_20180418.vcf

Compressing and indexing dbSNP VCF with bgzip and tabix.

Need to install bgzip and tabix in your computer. Produced file:

  • All_20180418.vcf.gz
  • All_20180418.vcf.gz.tbi

This step takes a lot of time

bgzip -c All_20180418.vcf >  All_20180418.vcf.gz
tabix -fp vcf All_20180418.vcf.gz

Download of gnomAD data

Download gnomAD (version 2.0.2) data.

wget http://compgen.bio.unipd.it/downloads/gnomad.exomes.r2.0.2.sites.vcf.gz
wget http://compgen.bio.unipd.it/downloads/gnomad.exomes.r2.0.2.sites.vcf.gz.tbi

The gnomad.exomes.r2.0.2.sites.vcf.gz is compressed by bgzip and indexed by tabix.

Download of ClinVar data

Download of ClinVar data from https://ftp.ncbi.nlm.nih.gov/pub/clinvar/vcf_GRCh38/. Obtained files:

  • clinvar.vcf.gz
  • clinvar.vcf.gz.tbi

Their date portion could be different, if so, remember to put the right filename in the configuration.py file:

clinvar = "clinvar.vcf.gz"

Download of COSMIC data

COSMIC files, which are free only for academic researchers, can be downloaded from https://cancer.sanger.ac.uk/cosmic/download after sign up and login. The needed files are:

  • CosmicCodingMuts.vcf.gz
  • cancer_gene_census.csv

Making the .tbi file:

gunzip CosmicCodingMuts.vcf.gz
java -jar SnpSift.jar rmInfo CosmicCodingMuts.vcf AA > CosmicCodingMuts_noAA.vcf
mv CosmicCodingMuts_noAA.vcf CosmicCodingMuts.vcf
bgzip -c CosmicCodingMuts.vcf > CosmicCodingMuts.vcf.gz
tabix -p vcf CosmicCodingMuts.vcf.gz

About

🐳 Dockerized WES pipeline for variants identification in mathced tumor-normal samples

Topics

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published