Skip to content

agiledigital-labs/print-provision-greengrass

Repository files navigation

PrintOS Receipt Printer Device Software

We've open-sourced this repo as an example of an AWS IoT Greengrass project. This is our first time using Greengrass and this project isn't battle-tested yet, but we hope it will be useful as a reference for other engineers working on Greengrass projects.

For some background about this repo, have a look at the article we wrote about it: Cloud-printing for Restaurants with AWS IoT Greengrass.

If you want to try running this software yourself, read through the Without the Private Dependencies section first. It explains how to mock the internal components that aren't included in this repo.


This repo contains

  • the software that runs on PrintOS devices, and
  • the config files and script used to set up the AWS Greengrass service for managing the devices.

A PrintOS device is a computer, usually a Raspberry Pi, running at a vendor's store, connected to the internet and to a receipt printer. It can also be connected to local PotatOS point-of-sale devices.

It receives print jobs from the POS devices when patrons place orders in person and from the internet when patrons place orders online.

See https://jira.agiledigital.com.au/browse/QFXFB-888 for more details. Based on https://github.com/DataPOS-Labs/print-provision.

Greengrass

This project uses AWS Greengrass, an orchestration system for IoT devices. Its main parts are the Greengrass service in AWS and the Greengrass Core software that runs on the devices.

The software is packaged into Greengrass "components", which are deployed through the Greengrass service. On the devices, the Greengrass Core software downloads the components, runs them, restarts them if they crash, reports their statuses to the Greengrass service and so on.

Contents

Component Diagram

Remote Printing Process

  1. A patron places an order through one of the patron apps.
  2. core-services creates a print job with printos-serverless-service to print the order receipt on the vendor's printer.
  3. printos-serverless-service sends the print job to the vendor's Raspberry Pi over MQTT.
  4. The MQTT message triggers the ReceiptPrinterMQTTInterface Lambda, which runs on the Raspberry Pi. It just passes the print job along to ReceiptPrinterHTTPInterface.
  5. ReceiptPrinter polls ReceiptPrinterHTTPInterface and receives the print job. It formats the receipt and prints it. Then it tells ReceiptPrinterHTTPInterface that the job is complete, which tells printos-serverless-service and so on.

We use MQTT to send the remote print jobs mainly because it's the protocol with the best support in AWS IoT. The main difference between it and HTTP is that MQTT uses a pub/sub model.

Local Network Printing Process

  1. A patron places an order in person and the vendor's staff enter it into PotatOS.
  2. PotatOS submits a print job for the receipt over the local network through the HTTP interface.
  3. ReceiptPrinter polls ReceiptPrinterHTTPInterface and receives the print job. It formats the receipt and prints it.

Directory Structure

├── artifacts/
│   │ The software artifacts for the Greengrass components, one subdir per component. The contents
│   │ are deployed to the IoT devices (the Raspberry Pis).
│   ├── io.datapos.ReceiptPrinter/
│   │     Formats the print jobs and prints them.
│   ├── io.datapos.ReceiptPrinterHTTPInterface/
│   │     Receives print jobs through HTTP from the local network and from
│   │     ReceiptPrinterMQTTInterface.
│   └── io.datapos.ReceiptPrinterMQTTInterface/
│         Receives remote (internet) print jobs from AWS through MQTT.
├── component-artifact-policy.json
│     Used by deploy.sh when it creates the IAM policy that lets the devices get the artifacts from
│     S3.
├── components.drawio
│     A component diagram for the project.
├── components.png
│     A raster of components.drawio.
├── copy-to-pi.sh
│     Copies this dir to your test device (RPi) so you can deploy locally for testing.
├── deploy-local-on-pi.sh
│     Deploy locally for testing. Run this on your test device.
├── deploy.sh
│     Deploy remotely, i.e. through AWS. Use this for production deployments.
├── deployment.yaml
│     Used by deploy.sh. Specifies the components to be deployed, among other things.
├── recipes/
│   │ The config and metadata for the Greengrass components.
│   ├── io.datapos.ReceiptPrinterMQTTInterface.yaml
│   ├── io.datapos.ReceiptPrinterHTTPInterface.yaml
│   └── io.datapos.ReceiptPrinter.yaml
└── repair
      A script called when the system watchdog detects an error.

Setting Up a Raspberry Pi

  1. Write Raspberry Pi OS (previously known as Raspian) to the SD card. I used Raspberry Pi Imager v1.6.1 to write 2021-03-04-raspios-buster-armhf-lite.img.

  2. Enable SSH. (See item 3.)

    touch /path/to/mounted/sd/card/boot/ssh
  3. Set up WiFi if needed.

  4. You might want to change its mDNS hostname if there will be other Raspberry Pis on the network. I'm not sure whether that can be done before the first boot. By default, the hostname will be raspberrypi.local.

  5. Unmount the SD card and boot the Raspberry Pi with it.

  6. SSH into it. The default password is raspberry.

  7. Run passwd to change the password for the pi user. TODO: Can we do this more securely by editing /etc/shadow before the initial boot?

  8. On the Raspberry Pi, install the requirements for the AWS IoT Greengrass Core software.

    1. Install OpenJDK 11. For me, this installed version 11.0.11+9-1~deb10u1.
      sudo apt update
      sudo apt install --yes openjdk-11-jdk
    2. Install Node.js 12. For me, this installed version 12.22.1-1nodesource1.
      sudo su
      curl -fsSL https://deb.nodesource.com/setup_12.x | bash -
      apt install --yes nodejs
      exit
  9. On the Raspberry Pi, install the requirements for the AWS IoT Device JS SDK v2. For me, this installed CMake 3.16.3-3~bpo10+1 and libssl-dev 1.1.1d-0+deb10u6+rpt1.

    sudo apt install --yes cmake libssl-dev
  10. Follow Install the AWS IoT Greengrass Core software to install the Greengrass Core software on the Raspberry Pi. For me, this installed version 2.1.0.

    • Make a note of the command and options you use when you run Greengrass.jar. It's probably worth saving the output, too.
    • Use --setup-system-service true so Greengrass will start on boot. The installer will create a systemd service for it.
    • Use the ap-southeast-2 region.
    • Install to the default location, /greengrass/v2.
    • Either use --tes-role-name ReceiptPrinterGreengrassV2TokenExchangeRole or edit the device_role global in deploy.sh.
    • For example:
      sudo -E java -Droot="/greengrass/v2" -Dlog.store=FILE \
        -jar ./greengrass-nucleus-latest/lib/Greengrass.jar \
        --aws-region ap-southeast-2 \
        --thing-name ReceiptPrinterPi \
        --thing-group-name ReceiptPrinterGroup \
        --tes-role-name ReceiptPrinterGreengrassV2TokenExchangeRole \
        --tes-role-alias-name ReceiptPrinterGreengrassCoreTokenExchangeRoleAlias \
        --component-default-user ggc_user:ggc_group \
        --provision true \
        --deploy-dev-tools true \
        --setup-system-service true
  11. Add the Raspberry Pi as a device in your printos-serverless-service instance.

    1. In DynamoDB, find the printClientsTable-[stage] table.
    2. Add a new item with the Raspberry Pi's Thing Name as the destination. Make a note of the password you choose as you will need it when you deploy this project to the Pi. If you have multiple devices in the same Thing Group, they currently all need to use the same password.
  12. Configure the hardware watchdog to reboot the Pi if it freezes or its network connection drops out.

    We only configure it to check "that successive intervals see a different value of RX bytes", rather than pinging the server, so internet drop-outs won't interrupt local printing. If the Pi loses internet connection, but not network connection, rebooting isn't likely to help.

    1. Enable the watchdog device.
      sudo su
      echo 'dtparam=watchdog=on' >> /boot/config.txt
      reboot
    2. Copy the repair script to /home/pi.
      scp repair [email protected]:/home/pi/
      
    3. Set up the watchdog service.
      sudo su
      # For me, this installed 5.15-2.
      apt install --yes watchdog
      # Install the repair script and set its permissions.
      cp /home/pi/repair /usr/sbin/repair
      chown root:root /usr/sbin/repair
      chmod 700 /usr/sbin/repair
      # Fail the watchdog if the Greengrass service isn't running.
      mkdir -p /etc/watchdog.d
      echo '#!/bin/sh' > /etc/watchdog.d/greengrass
      echo 'systemctl is-active greengrass' >> /etc/watchdog.d/greengrass
      chown root:root /etc/watchdog.d/greengrass
      chmod 700 /etc/watchdog.d/greengrass
      # Update the config file.
      cat >> /etc/watchdog.conf << EOM
      
      # Added for PrintOS.
      watchdog-device = /dev/watchdog
      # This defaults to 60 on my Pi, but that causes an error.
      # See https://www.raspberrypi.org/forums/viewtopic.php?t=244843
      watchdog-timeout = 15
      test-directory = /etc/watchdog.d
      # Run the repair script when the watchdog fails to try to recover.
      repair-binary = /usr/sbin/repair
      # Kill the repair script if it takes more than 10 seconds.
      repair-timeout = 10
      # If the repair script reports success (returns 0), but the error hasn't cleared, reboot
      # anyway.
      repair-maximum = 1
      # Wait 60 seconds for the error to clear on its own before repairing and rebooting.
      retry-timeout = 60
      # Fail the watchdog if 1 min load average goes over 24.
      max-load-1 = 24
      # Fail the watchdog if the network interface disconnects or stops working.
      # IMPORTANT: Use 'ip link' to check that the interface name (wlan0) is right.
      interface = wlan0
      # Ensure the watchdog daemon will be scheduled in time.
      realtime = yes
      priority = 1
      EOM
      # Start the service.
      systemctl enable watchdog
      systemctl start watchdog
      # Check it.
      systemctl status watchdog
      exit
    4. Test it by running sudo ifconfig wlan0 down and waiting a minute to see if the Pi comes back online.
    5. Check the logs with journalctl -t watchdog.
  13. Deploy the PrintOS software to the Raspberry Pi by following the Deploying section below.

If you need to install a driver for an Epson TM-T20 printer, see https://github.com/DataPOS-Labs/print-provision#raspberry-pi-deps.

Deploying

First, download PrintOS.jar from the print-provision repo and put it in artifacts/io.datapos.ReceiptPrinter/. If you don't have access to PrintOS.jar, you can use the mock version instead.

For Development

  1. Run nvm use in the root dir to switch to the project's Node.js version.
  2. Run npm install in health-reporting/, artifacts/io.datapos.ReceiptPrinterMQTTInterface/ and artifacts/io.datapos.ReceiptPrinterHTTPInterface/.
  3. If you've deployed any of the components through AWS (i.e. not locally), you'll need to remove them from the device before deploying different versions of them locally. For example,
    sudo /greengrass/v2/bin/greengrass-cli deployment create \
       --remove io.datapos.ReceiptPrinter --groupId thinggroup/ReceiptPrinterGroup
    Then check sudo /greengrass/v2/bin/greengrass-cli component list until it's removed from the list. The docs say you can give multiple component names with --remove, but I've found that causes the command to have no effect, at least when also using --groupId.
  4. Edit the recipes in the recipes/ dir and change the configuration variables for the components as needed. You'll probably need to change most of them. There are some comments in the recipes that explain how.
  5. Copy the project directory to your Raspberry Pi by running copy-to-pi.sh (or some other way). copy-to-pi.sh assumes its hostname will be raspberrypi.local, so you'll need to edit it if you've changed that.
  6. If you haven't already done so on this Pi, or if you've changed the dependencies in health-reporting, run npm ci in health-reporting/ on the Pi. This will compile the AWS packages that have native code. It takes about 15 minutes, but you should only need to do it occasionally. That said, it's probably worth making a backup copy of health-reporting/node_modules/ in case you accidentally delete it.
  7. Run deploy-local-on-pi.sh from the project directory on the device.

For Production

  1. Checkout the tag for the version you want to deploy, which is probably the most recent release tag. See the Releasing section below if you want to deploy a version that hasn't been released yet.

  2. Run nvm use in the root dir to switch to the project's Node.js version.

  3. Run npm ci in artifacts/io.datapos.ReceiptPrinterMQTTInterface/ and artifacts/io.datapos.ReceiptPrinterHTTPInterface/.

  4. Build the native binaries for the AWS packages that have native code.

    If you want to deploy to devices with different architectures, you'll need a separate deployment for each. You might be able to follow these steps once for each architecture and then combine the health-reporting/node_modules/aws-crt/dist/bin/ dirs, but I haven't tried it. And I don't know how you'd combine the sha256_profile files.

    1. Copy the project to one of the devices you're going to deploy to.
    2. Run npm ci in health-reporting/ on that device. This will compile the AWS packages that have native code. It takes about 15 minutes.
    3. Copy health-reporting/node_modules/ from the device to your PC. For example,
      rm -rf print-provision-greengrass/health-reporting/node_modules
      rsync --info=progress2 --archive \
        [email protected]:/home/pi/print-provision-greengrass/health-reporting/node_modules \
        print-provision-greengrass/health-reporting/
  5. Edit deployment.yaml:

    1. Change the targetArn field to the ARN of your AWS IoT Thing Group. You can find it at https://console.aws.amazon.com/iot/home#/thingGroupHub.
    2. Change the configuration variables for the components as needed. You'll probably need to change most of them. There are some comments in the file that explain how.
  6. If you haven't already, configure the AWS CLI to use the correct account/user.

    aws configure

    You can check first with aws sts get-caller-identity.

  7. Choose an S3 bucket to store the components' artifacts and run deploy.sh [S3 bucket name]. If the bucket doesn't already exist, deploy.sh will create it. Note that S3 bucket names must be globally unique.

    deploy.sh will then:

    1. If it hasn't already been created, create and attach an IAM policy that allows the devices to read the files in the S3 bucket.
    2. Upload the software artifacts into the S3 bucket so the devices can download and run them.
    3. In the AWS Greengrass service, create
      • the current version of each component, and
      • a deployment that deploys those versions to the devices.
  8. Consider committing your deployment.yaml to the main branch, for example, as deployment-brodburger.yaml.

Checking Your Deployment

It can take a while for the deployment to roll out to your device and start running, even for a local deployment. You can check its progress in the AWS Console or on your device.

To check the progress on a particular device, you can watch the logs from the deployment by running this on the device:

sudo tail --follow=name /greengrass/v2/logs/greengrass.log

Or you can run (from any machine) aws greengrassv2 list-installed-components --core-device-thing-name [thing name] to see the version numbers of the components currently deployed to it. The thing name will be "ReceiptPrinterPi" if you followed the example above. Or run sudo /greengrass/v2/bin/greengrass-cli component list on the device itself to get a list with more useful details.

Administration

See the Logging and monitoring section in the Greengrass docs for more info.

Logs

We use Greengrass's built-in Log Manager component to send logs from the devices to CloudWatch. You can find those logs in the AWS console under CloudWatch > Log Groups in these log groups:

  • /aws/greengrass/UserComponent/[region]/io.datapos.ReceiptPrinter
  • /aws/greengrass/UserComponent/[region]/io.datapos.ReceiptPrinterHTTPInterface
  • /aws/greengrass/UserComponent/[region]/io.datapos.ReceiptPrinterMQTTInterface
  • /aws/greengrass/GreengrassSystemComponent/[region]/System

The devices only send logs to CloudWatch after the log file has been rotated out and in some cases they will wait a long time before sending new logs. During development, it's much easier to use SSH to check the log files directly.

To change the configuration for Log Manager, edit deployment.yaml.

There's a bug somewhere that puts the logs from ReceiptPrinterHTTPInterface and ReceiptPrinterMQTTInterface into the log group for ReceiptPrinter as well. You can use this filter to clean up the logs in that group.

-"io.datapos.ReceiptPrinterHTTPInterface:" -"io.datapos.ReceiptPrinterMQTTInterface:" -"\"pass\":true"

This filter will hide the repeated health check logging in the logs from ReceiptPrinterHTTPInterface and ReceiptPrinterMQTTInterface.

-"Health report data:" -"Successfully reported health" -"Reporting health..."

Monitoring

You can check the latest health status reported from a device by the Receipt Printer software in the AWS console at

AWS IoT > Things > [the device's thing name] > Shadows > mqtt-health or http-health

The mqtt-health shadow is the status of the ReceiptPrinterMQTTInterface component and http-health is the status of ReceiptPrinterHTTPInterface. The ReceiptPrinter component doesn't currently report its health status because we don't have the source code for it.

To see older health statuses, search in the logs.

You can also graph the health statuses in Grafana (staging, live) by going to the Explore page and using the external_service_status_total metric. For example, this query will graph all failing health status reports.

external_service_status_total{status != 'Success'}

You can check the status reported to printos-serverless-service for each print job in the AWS console here. Replace [stage] with the stage name you used when you deployed printos-serverless-service.

https://console.aws.amazon.com/dynamodb/home#tables:selected=printJobsTable-[stage];tab=items

You can check the health of the Greengrass Core software and components on each device at AWS IoT > Greengrass > Core Devices. Click one of the devices to see the health of each of its components individually.

To set up more advanced monitoring, see Gather system health telemetry data in the AWS docs.

Troubleshooting

Greengrass writes logs to the directory /greengrass/v2/logs on the device, including logs from the components. You can watch the most relevant logs with

sudo tail --follow=name /greengrass/v2/logs/io.datapos.ReceiptPrinterHTTPInterface.log \
  --follow=name /greengrass/v2/logs/io.datapos.ReceiptPrinterMQTTInterface.log \
  --follow=name /greengrass/v2/logs/io.datapos.ReceiptPrinter.log \
  --follow=name /greengrass/v2/logs/greengrass.log

You can check on the Greengrass Core software with

systemctl status greengrass

List the components installed on the device with their version numbers and statuses with

sudo /greengrass/v2/bin/greengrass-cli component list

Manually remove a component after deploying it locally (e.g. with deploy-local-to-pi.sh) with

sudo /greengrass/v2/bin/greengrass-cli deployment create \
  --remove [component name, e.g. io.datapos.ReceiptPrinter]

If you deployed the component remotely (e.g. with deploy.sh), you'll need to add--groupId thinggroup/[thing group name, e.g. ReceiptPrinterGroup].

Releasing

  1. Following semver, bump the version numbers of every component, even if they haven't been changed since their last release. The release and deploy processes are a bit easier if we keep the version numbers in sync and so far we don't have a good reason not to.
    1. Change the version numbers in the recipes/ files. You may need to change it in multiple places in some of them, e.g. in the S3 URLs.
    2. Change the version numbers in deploy.sh and deploy-local-to-pi.sh.
    3. Change the version numbers in deployment.yaml.
  2. Commit to main.
  3. Tag your commit with the new version number.

Testing

For testing, you can configure the ReceiptPrinter component to print to PDF. However, the PDF will always be blank, so you still need a real receipt printer to test the output.

  1. The printer configuration variable in io.datapos.ReceiptPrinter.yaml needs to be set to PDF, which it is by default.
  2. Install the print-to-PDF driver on your test device: sudo apt install cups cups-bsd printer-driver-cups-pdf
  3. In /etc/cups/cups-pdf.conf on your device, comment out the line Out ${HOME}/PDF. That configures the driver to write the PDFs to /var/spool/cups-pdf/ggc_user (ggc_user is the user the component runs as), which avoids permissions issues.
  4. Restart CUPS: sudo systemctl restart cups

Submitting a Test Job

In this example, https://3qpbp0efwe.execute-api.ap-southeast-2.amazonaws.com/dev/submit is the /submit endpoint of your printos-serverless-service deployment, blueberry is the password in its DynamoDB and ReceiptPrinterPi is the AWS IoT Thing Name of your test device (i.e. your Raspberry Pi).

curl https://3qpbp0efwe.execute-api.ap-southeast-2.amazonaws.com/dev/submit --data "destination=Rec\
eiptPrinterPi&password=blueberry&data=%7B%22mode%22%3A%22tagged%22%2C%22comments%22%3A%22%3Ccenter%\
3E+Powered+by+DataPOS+%3C%2Fcenter%3E+%3Ccenter%3E+Powered+by+DataPOS+%3C%2Fcenter%3E+%3Ccenter%3E+\
%3Ch3%3ETime+Ordered%3A%3C%2Fh3%3E+%3C%2Fcenter%3E+%3Ccenter%3E+%3Ch3%3E+2%2F05%2F21+2%3A23+PM+%3C%\
2Fh3%3E+%3C%2Fcenter%3E+%3Cleft%3EService+Mode%3A+TakeAway%3C%2Fleft%3E+++++%3Cleft%3E+%3Ch3%3E1+Br\
azilian+Rooster%7E%3C%2Fh3%3E+%3C%2Fleft%3E+++++%3Cleft%3E+%3Ch3%3E2+Japanese+Rooster%7E%3C%2Fh3%3E\
+%3C%2Fleft%3E+++++%3Cleft%3E+%3Ch3%3E1+Little+Rooster%7E%3C%2Fh3%3E+%3C%2Fleft%3E+++++%3Cleft%3E+%\
3Ch3%3E1+Manly+Rooster%7E%3C%2Fh3%3E+%3C%2Fleft%3E++++++%3Ccenter%3E%3Ch3%3E%2B+Pineapple%3C%2Fh3%3\
E%3C%2Fcenter%3E++++++%3Ccenter%3E%3Ch3%3E%2B+Bacon%3C%2Fh3%3E%3C%2Fcenter%3E+++++++++%3Cleft%3E+%3\
Ch3%3E3+Hot+Chips%3C%2Fh3%3E+%3C%2Fleft%3E++++++%3Ccenter%3E%3Ch3%3EChicken+Salt%3C%2Fh3%3E%3C%2Fce\
nter%3E+++++%3Cleft%3E+%3Ch3%3E2+Hot+Chips%3C%2Fh3%3E+%3C%2Fleft%3E++++++%3Ccenter%3E%3Ch3%3ERegula\
r+Salt%3C%2Fh3%3E%3C%2Fcenter%3E++++%3Ccenter%3E+%3Ch4%3EOrder+and+Collect%3C%2Fh4%3E+%3C%2Fcenter%\
3E+%3Ccenter%3E+%3Ch5%3EOrder+NO.+Y14%3C%2Fh5%3E+%3C%2Fcenter%3E++++%3Cleft%3EPhone%3A+%2B614001210\
94%3C%2Fleft%3E+++++%3Cleft%3EName%3A+Sharon+Newman%3C%2Fleft%3E++++%3Ccenter%3E+Powered+by+DataPOS\
+%3C%2Fcenter%3E+%22%7D"

Without the Private Dependencies

This software has an internal dependency that we haven't made public, PrintOS.jar. It also expects to be able to reach two internal services, printos-serverless-service and our public API.

You can still deploy the project and test it yourself, you just won't be able to actually print any receipts.

First, follow the instructions in the Setting Up a Raspberry Pi section to prepare your IoT device. You should still be able to use them if you're going to use a standard PC or something other than a Raspberry Pi, but you'll need to adjust some of the instructions. And skip over the ones that assume you have access to the internal dependencies.

Then you'll need to set up some simple mocks.

Mocks

The easiest way to mock out the internal services is using socat. If you don't have it installed, your package manager probably has a package named socat. Run these commands on the system you'll be deploying to.

socat -v TCP-LISTEN:12345,crlf,reuseaddr,fork SYSTEM:"echo HTTP/1.1 200; echo" &
socat -v TCP-LISTEN:12346,crlf,reuseaddr,fork \
  SYSTEM:"echo HTTP/1.1 200; echo set-cookie\: abc; echo" &

Then you'll need to change some URLs in the config files, so they point to those mock services. In deployment.yaml and in each of the files in the recipes/ dir, set printServerUrl to "http://localhost:12345" and set dataposApiUrl to "http://localhost:12346".

We've provided a script for mocking PrintOS.jar, mock-PrintOS.jar.py. Configure the project to use it by setting mockPrintOSJar to "true" in deployment.yaml and in recipes/io.datapos.ReceiptPrinter.yaml. Then install mock-PrintOS.jar.py's dependency by running this in artifacts/io.datapos.ReceiptPrinter/:

python3 -m pip install --target ./py_modules requests

Now you should be able to deploy the project by following the instructions in the Deploying section.

Sending Print Jobs

The print jobs normally come from printos-serverless-service, so you'll need to send them yourself. You can do this from the AWS Console at AWS IoT > Test > "Publish to a topic".

Enter print-job/YourThingName as the topic name, where YourThingName is the name of your IoT device. ("ReceiptPrinterPi" if you followed the example in Setting Up a Raspberry Pi.) Then enter the following message payload and click Publish.

{
  "id": "1",
  "data": "{\"mode\":\"tagged\",\"comments\":\"<h3>Example+Receipt</h3><center>Powered+by+DataPOS</center>\"}"
}

If it worked, you should see this in /greengrass/v2/logs/io.datapos.ReceiptPrinter.log:

Reporting success for job 1. data: {"mode":"tagged","comments":"<h3>Example Receipt</h3><center>Powered by DataPOS</center>"}
Response status: 200, body: {"pass":true}

And similar success messages in io.datapos.ReceiptPrinterMQTTInterface.log and io.datapos.ReceiptPrinterHTTPInterface.log.