Advanced Topics

Fixed IP Address

The FixedIPAddress example shows how to use a static IP address instead of DHCP. It all boils down to this:

	IPAddress ip (IP_ADDRESS);
	IPAddress dns (DNS_ADDRESS);
	IPAddress gw (GW_ADDRESS);
	IPAddress mask (NETMASK);

	Serial.println (F("Configuring static IP address"));
#if defined (WEBBINO_USE_ENC28J60) || defined (WEBBINO_USE_WIZ5100) || \
	  defined (WEBBINO_USE_WIZ5500)
	byte mac[6] = {MAC_ADDRESS};
	bool ok = netint.begin (mac, ip, dns, gw, mask);
#elif defined (WEBBINO_USE_ENC28J60_UIP)
	byte mac[6] = {MAC_ADDRESS};
	bool ok = netint.begin (mac, ip, dns, gw, mask, SS_PIN);
#elif defined (WEBBINO_USE_ESP8266) || defined (WEBBINO_USE_ESP8266_STANDALONE)
	#error "ESP8266 does not currently support static IP configuration"
#elif defined (WEBBINO_USE_FISHINO)
	bool ok = netint.begin (WIFI_SSID, WIFI_PASSWORD, ip, dns, gw, mask);
#elif defined (WEBBINO_USE_WIFI) || defined (WEBBINO_USE_WIFI101)
	#error "WiFi/WiFi101 does not currently support static IP configuration"
#elif defined (WEBBINO_USE_DIGIFI)
	#error "Static IP configuration for DigiFi must be set in its own interface"
#endif

Note that using a fixed address is NOT supported on all platforms.

AJAX

The Ajax example is a very simple example of how to use AJAX techniques. It's actually pretty useless, as everything is done in the HTML, Webbino does not need anything special to support this.

TODO

#ifdef in HTML