dimmy pcb

Dimmy Version 1

OBSOLETE

• 7 Channel Mosfet (6x3A + 1x10A)
• PCA9685
• Wemos D1/Wemos Esp32

Dimmy Version 2

• 7 Channel Mosfet (6x3A + 1x10A)
• PCA9685
• Wemos d1/Wemos Esp32
• 4x onboard standard car fuses
• I2C support

Software

Wired (I2C):

Connect the Dimmy PCB to the VAN PI Relayboard via JST PH 4pin cable and it will work directly. (Using VanPi OS)

WIFI / Pekaway Mota Wemos d1 (Esp8266/Esp32):

We compiled a custom version of Tasmota.io, to add the support for the PCA9685 PWM Controller. Flash Pekaway Mota with our Onboard Flasher or with our Online Flasher.

• Supports dimming via VAN PI OS (MQTT)
• Supports reading DS18B20 via 3pin Connector
• Supports GPIO Readings -> in development - esp32 8xGPIO - esp8266 4xGPIO

Standalone:

Control the 7 Channel via GPIO button/switches. - supports dimming by keeping pressed - sleep timer (long pressing while active)

Known Issues

• Pullup resistors (R21-R29) prevent boot, there are removed on the PCB in our shop.