The Pinball Power-Up Controller software and hardware family is designed to enhance the capabilities of classic pinball machines, mainly of the 80s and 90s and to drive the hardware of home brew pinball machines.
In existing machines, the controller is able to monitor all playfield switches, lights, and solenoids and to trigger and distribute corresponding events to attached sub-systems. In combination with PIN2DMD and TiltAudio it is possible to monitor DMD and sound commands, too.
One sub-system is the built-in EffectController which is able to drive additional LEDs, motors, and coils. Other sub-systems could be video players or audio systems. The additional effects are bundled per pinball machine in so-called Pinball Power-Ups (PPUs).
For homebrew machines there will be additional software to act as "CPU", running the game logic aka rules and communicating with the controllers. (WIP)
A special variation of that "CPU" will be suitable as replacement for a broken CPU of an existing machine. The development happens as part of the PinMAME project.
We want to enable people to be creative and to modernize old pinball machines using today's technology. Our goal is to establish an open and affordable platform for that. Ideally people will publish their game-specific PPUs so others could leverage and potentially improve them. We want to see a growing library of PPUs and a vital homebrew pinball community.
The Pinball Power-Up Controllers consist of multiple micro controllers to perform several tasks in parallel. The entire system is modular, so you can choose what you really need. The basic setup consists of a controller to capture a pinball's events and another independent one to run effects.
We will provide several integrated boards and vendor specific adaptor boards (currently in development: Williams WPC, Data East, Stern SAM and Whitestar).
The Effect Controller should be able to drive hundreds (or thousands?) of LEDs, PWM devices, ... in parallel in a non-blocking way.
Still WIP, but the hardware and firmware gets better and better ;-)
WIP, see PPUC sub-system as part of the PinMAME project.
The code is licenced under GPLv3. Be aware of the fact that your own Pinball Power-Ups (PPUs) need to be licenced under a compatible licence. That doesn't prevent any commercial use, but you need to respect the terms and conditions of GPLv3!
We would appreciate contributions to PPUC itself or as game-specific PPUs.
ZeDMD is a "real" DMD for pinball emulations and other use cases, developed as part of the PPUC project. For more details, visit the ZeDMD page.