Proxy server for ACME DNS challenges written in Go.
Works with the httpreq DNS challenge provider in lego and with the acmeproxy provider in acme.sh (currently in the dev branch).
Acmeproxy was written to provide a way make it easier and safer to automatically issue per-host Let's Encrypt SSL certificates inside a larger network with many different hosts. Especially when these hosts aren't accessible from the outside, and they need to use the DNS challenges and require DNS API access.
The regular approach would be to run an ACME client on every host, which would also mean giving each hosts access to the (full) DNS API. This is both hard to manage and a potential security risk.
As a solution Acmeproxy provides the following:
- Allow internal hosts to request ACME DNS challenges through a single host, without individual / full API access to the DNS provider
- Provide a single (acmeproxy) host that has access to the DNS credentials / API, limiting a possible attack surface
- Username/password or IP-based filtering for clients to prevent unauthorized access
- Domain validation to only allow ACME DNS requests for specific domains
- Use certmagic internally to run a https instance of acmeproxy and manage certificates (set
--ssl auto)
If you're looking for other ways to validate internal certificates, take a look at autocertdelegate which uses the tls-alpn-01 method.
Acmeproxy was written to be run within an internal network, it's not recommended to expose your Acmeproxy host to the outside world. Do so at your own risk.
See the discussions for this idea in lego here
to use acmeproxy as backend with providers from the lego package they need to implement a CreateRecord/RemoveRecord method that takes an FQDN + acme value as input. The discussion if this should be practice is on-going, see issue 720. As an example take a look at PR #883 of how this was implemented for the transip provider (don't worry, it's not difficult).
Use the makefile to make the executables. Use make install to also install the executable to /usr/local/bin.
If you want to build a Debian package / installer, use dch to update the changelog and create your own package using make debian.
Copy config.yml to a directory (default: /etc/acmeproxy). See below for a configuration example using the transip provider. You need to specify the relevant environment variables for the provider you've chose. See the lego documentation for options per provider. Also see the examples below. If you want to provide proxies for multiple providers, start multiple instances on different hosts/ports (using different config files).
# Environment variables to be used with this provider
environment:
- "TRANSIP_ACCOUNT_NAME=example"
- "TRANSIP_PRIVATE_KEY_PATH=/etc/acmeproxy/transip.key"
- "TRANSIP_POLLING_INTERVAL=30"
- "TRANSIP_PROPAGATION_TIMEOUT=600"
# General settings
interface: "acmeproxy.example.com"
port: 9096
provider: "transip"
htpasswd-file: "/etc/acmeproxy/htpasswd"
accesslog-file: "/var/log/acmeproxy.log"
log-forcecolors: true
log-forceformatting: true
log-level: debug
log-timestamp: true
allowed-domains:
- "example.com"
- "example.net"
- "anotherexample.net"
allowed-ips:
- 127.0.0.1
- 172.0.0/16
# Settings for the acmeproxy SSL certificate (used with this interface)
ssl: manual
ssl.manual.cert-file: "/etc/lego/certificates/acmeproxy.example.com.crt"
ssl.manual.key-file: "/etc/lego/certificates/acmeproxy.example.com.key"
ssl.auto.agreed: true
#ssl.auto.ca: "https://acme-v02.api.letsencrypt.org/directory"
ssl.auto.ca: "https://acme-staging-v02.api.letsencrypt.org/directory"
ssl.auto.email: "[email protected]"
ssl.auto.key-type: "rsa2048"
ssl.auto.path: "/etc/acmeproxy/certmagic"
ssl.auto.provider: "transip"
If you want to use client authentication (username/password), use following command: htpasswd -c /etc/acmeproxy/htpasswd testuser to create a new htpasswd file with user testuser.
If you want to use serverside IP based authentication set allowed-ips in the configfile (or set --allowed-ips on the commandline). You can use multiple IPs / nets in a CIDR notation, e.g. 127.0.0.1, 172.16.0.0/16 or 192.168.10.0/24.
If you've configured acmeproxy via the config file, you can just run acmeproxy. It will run in the foreground.
If you want to use acmeproxy as a daemon (in the background) use the acmeproxy.service in debian/ as an example for systemd and copy it to /etc/systemd/systemd and enable it by systemctl enable acmeproxy.service. Be sure to check the ExecStart variable to see if it points to the right executable (/usr/bin/acmeproxy by default). Of course if you build acmeproxy as a Debian package the systemd service will be installed as part of the package.
NAME:
acmeproxy - Proxy server for ACME DNS challenges
USAGE:
acmeproxy [global options] [arguments...]
VERSION:
dev
GLOBAL OPTIONS:
--accesslog-file FILE Location of additional accesslog FILE
--allowed-domains value Set the allowed domain(s) that certificates can be requested for.
--allowed-ips value Set the allowed IP(s) that can request certificates (CIDR notation possible, see https://github.com/jpillora/ipfilter)
--config-file FILE Load configuration from FILE (default: "/etc/acmeproxy/config.yml")
--htpasswd-file FILE Htpassword file FILE for username/password authentication (default: "/root/.acmeproxy/htpasswd")
--interface value Interface (ip or host) to bind for requests
--log-level LEVEL Log LEVEL (trace|debug|info|warn|error|fatal|panic) (default: "info")
--log-forcecolors Force colors on output, even when there is no TTY
--log-forceformatting Force formatting on output, even when there is no TTY
--log-timestamp Output date/time on standard output log
--port value Port to bind for requests (default: 9095)
--provider value DNS challenge provider - see https://github.com/go-acme/lego for options, also set relevant environment variables!
--ssl value Provide a HTTPS connection when listening to interface:port (supported: auto or manual)
--ssl.auto.agreed Read and agree to your CA's legal documents
--ssl.auto.ca value Certmagic CA endpoint (default: "https://acme-v02.api.letsencrypt.org/directory")
--ssl.auto.email value Provide an e-mail address to be linked to your certificates (defaults to $EMAIL)
--ssl.auto.key-type value Key type to use for private keys. Supported: rsa2048, rsa4096, rsa8192, ec256, ec384. (default: "rsa2048")
--ssl.auto.path PATH PATH to store certmagic information (default: "/root/.acmeproxy/certmagic")
--ssl.auto.provider value Certmagic DNS provider (defaults to --provider/-p)
--ssl.manual.cert-file FILE Location of certificate FILE (when using --ssl/-s)
--ssl.manual.key-file FILE Location of key FILE (when using --ssl/-s)
--help, -h show help
--version, -v print the version
If you run acmeproxy through systemd and use log-forcecolors: true and log-forceformatting: true - you can use journalctl -xe -o cat -u acmeproxy.service to see the original colored output with timestamps