Skip to content

A system for easily loading and running thousands of DOS programs on vintage hardware

License

Notifications You must be signed in to change notification settings

MobyGamer/total-dos-launcher

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Total DOS Launcher

The Total DOS Launcher is a system for easily loading and running thousands of DOS programs on vintage hardware.

If you're familiar with vintage gaming console "flash multicarts" that load hundreds of games onto a single console, that's what this is. Think of this project as "console multicart" software for DOS.

The Total DOS Launcher (TDL) was created for people who want to load their vintage systems with tons of programs and have them easily searchable and launchable without having to configure any menus by hand. In a nutshell, the TDL takes vintage archives on your modern system:

A Mind Forever Voyaging r77 (1985)(Infocom, Inc.) [Adventure, Interactive Fiction].zip
Adventure (1987)(Willie Crowther, Kevin B. Black) [Adventure, Interactive Fiction].zip
Adventure in Serenia [DC] (1982)(IBM) [Adventure, Interactive Fiction].zip
Adventures of Buckaroo Banzai Across the Eighth Dimension, The v3.87 (1985)(Adventure International) [Adventure, Interactive Fiction].zip
Alley Cat [DC] (1984)(IBM) [Action].zip
Archon- The Light and the Dark [DC] (1984)(Electronic Arts, Inc.) [Action, Strategy].zip
Arcticfox (1986)(Electronic Arts, Inc.) [Action, Simulation].zip
Battlezone [DC] (1983)(Atarisoft) [Action, Simulation].zip
Borrowed Time [DC] (1985)(Activision, Inc.) [Adventure].img.zip
Bouncy Bee Learns Letters v1.01 (1985)(IBM) [Educational].zip
California Games v1.01 (1988)(Epyx, Inc.) [Sports].zip
Centipede [DC] (1983)(Atarisoft) [Action].zip
Chessmaster 2000, The (1986)(Software Toolworks, Inc., The) [Strategy, Chess].zip

.

...and copies them to a temporary directory using DOS-compatible filenames that can be copied over to any DOS system, even 16-bit DOS versions without long-filename support:

AMINDFOR.ZIP
ADVENTUR.ZIP
ADVENTUA.ZIP
ADVENTUB.ZIP
ALLEYCAT.ZIP
ARCHON-T.ZIP
ARCTICFO.ZIP
BATTLEZO.ZIP
BORROWED.ZIP
BOUNCYBE.ZIP
CALIFORN.ZIP
CENTIPED.ZIP
CHESSMAS.ZIP

...along with a menu program that easily launches them without requiring them to be unzipped beforehand:

A sample TDL menu

It can do this with a few hundred programs, or thousands, or tens of thousands -- the only limitation is how much addressable storage space you have on your target DOS system.

The DOS-based launcher currently has the following features:

  • Automatically decompresses archive files if necessary
  • Creates bootable diskettes from bootable disk image files
  • Uses less than 300 bytes of RAM to launch programs (smaller than a single CONFIG.SYS BUFFER)
  • Caches itself to EMS, XMS, or raw extended memory to make returning to the menu instantaneous after a launched program exits
  • Runs on any system (8088 or higher, MDA or better)
  • Supports any text mode, from 40x25 up to 132x60
  • Can mark/unmark titles as "favorites" and toggle the display between all programs and only favorites

The TDL is currently in alpha development and testing; this paragraph will be removed when it is ready for prime time. If you run into trouble testing the TDL, feel free to contribute an issue via the github project. Features planned for the near future include search-as-you-type filtering of the game list, automatic management of the game cache, and customizable color schemes.

The Total DOS Launcher consists of two programs: An indexer, and a menu system. You use the indexer to prepare your files for copying over to the vintage DOS system, and you use the menu program on the DOS system to navigate and launch the programs you copied over.

For those not familiar with how github works, you can grab the most recent tagged codebase from https://github.com/MobyGamer/total-dos-launcher/tags

Indexer:
Currently a python script, so you'll need to install python 3.6 or higher on your system if it isn't already there. (When this project is past the beta stage, native binaries will be provided for Windows, Mac, and Linux.)
Menu program:
The menu program runs on any IBM PC or 100% compatible running DOS 2.10 or higher, with 384 KB RAM or higher. (If EMS or XMS are available, they are automatically used to speed operation.)

To prepare your files for copying over, run TDLIndexer.py with these arguments:

TDLIndexer.py <source directory> <destination directory>

The TDLIndexer.py program MUST be run in the same directory that contains the distro subdirectory, which contains all of the menu program elements that will get copied over with your files.

Example Usage (in this case, from a Window system):

C:\Projects\TDL>python3 TDLindexer.py ..\dos_program_sources\small.generic.4example output
Gathering list of files...
Found 96 files to copy.
Converting to DOS-friendly 8.3 filenames...
Generating files index...
Generating titles index...
Copying files from ..\dos_program_sources\small.generic.4example to output ...
Done.

This results in a complete distribution ready to copy over to your DOS system. It consists of the menu program, some index files, and your original source files in a files subdirectory:

02/03/2018  11:17 PM    <DIR>          files
01/18/2018  11:00 PM    <DIR>          utils
01/20/2018  06:22 PM           139,712 TDL.EXE
02/03/2018  11:17 PM             8,481 TITLES.IDX
02/03/2018  11:17 PM             1,346 FILES.IDX
07/07/2017  03:36 PM             2,988 TDL.INI
07/07/2017  03:36 PM             4,169 HANDLERS.INI

The indexer recurses through subdirectories. So if your menu structure looks like this:

DOS Games\
  Adventure\
    1981\
    1982\
    1983\

...they will all get picked up by the indexer as long as you specify DOS Games as the source directory.

Each program you want to process with the TDL must be self-contained in a single file. This typically means that all files that make up a single program (.EXE files, data files, etc.) be contained in a .zip file. However, you can process individual .COM and .EXE files as long as they don't require additional files. For example, the freeware game Flightmare (1984) only came as a single FLIGHT.COM file; it doesn't require any other files to run, so you can feed FLIGHT.COM directly to TDL without first putting it in a .zip file.

You can also feed non-program files to TDL, such as .TXT text files, GIFs, whatever. They'll be copied over as well, and if the appropriate handler exists on the target system, it will be used to "launch" those files as well. (See "Handling additional file types" elsewhere in this documentation.)

Using any method you feel comfortable with, copy the entire contents of the output directory you specified over to your vintage DOS system, being careful to preserve the directory structure.

Instructing the user on copying files from a modern system to a vintage system is beyond the scope of this documentation, but here are a few pointers to get you started:

  • Removable hard drives: You can use a Compact Flash card instead of a physical IDE drive with a cheap CF-to-IDE adapter; then all you need to do is insert it into your modern system with a CF card reader to do the copy. For very old systems that can't use IDE drives, there are homebrew ISA hard drive adapters that use CF cards directly; search the internet for "XTIDE Compact Flash" to find a few examples.
  • TCP/IP: Install a network card that has a supported DOS packet driver, then install and use some sort of transport to copy the files over. This can be Microsoft LAN Manager, Novel Netware, etc., or a simpler and faster option like Mike Brutman's mTCP suite. If your system can load programs into upper memory, you can also get away with running MS LANMAN resident, and just access your files as a driver letter over the network.
  • CD or DVD: Burn everything to a CD or DVD and just run from there.

While a serial or parallel cable can also work to copy files over (like LapLink, FastLynx, INTERLNK/INTERSVR, etc), the speed of a serial or parallel cable is extremely slow compared to the above methods and is generally not recommended unless you have no other choice.

On your vintage system, navigate to the directory you copied over and type TDL to launch the menu. Once the menu appears, use the arrow keys to navigate to the software you want to launch, and hit enter. The software will then run, and when it exits, you'll be returned to the menu to make another selection.

If the software you copy over is in compressed archives (ie. .ZIP files), the menu is smart enough to decompress an archive into a cache directory before trying to launch it. (It is also smart enough to not decompress an archive if it already exists in the cache.)

The TDL has some additional features that help with navigation and execution:

  • Pressing any letter will jump to the first title starting with that letter
  • Pressing F2 will mark/unmark a title as a "favorite", and you can use CTRL-F to toggle the title display between all titles and only favorites

Press F1 while in TDL to display a complete list of keys and functions.

The TDL swaps itself out of low DOS RAM before a program needs to run, and restores itself after the program has finished executing. By use of this swapping mechanism, the TDL does not "steal" any low DOS RAM away from programs that need to run.

The TDL has been successfully tested with 32-bit protected-mode programs that require a DOS extender (such as DOS4GW).

TDL, out of the box, does not need to be configured. If you want to configure it to your liking, such as specifying multiple source directories (to get past the DOS 2G partition limit), forcing a specific location for the cache directory, using a high-res VESA text mode, etc. then edit the TDL.INI and HANDLERS.INI files. Both .INI files contain a description of what they do.

TDL.EXE also has some command-line options to control how it operates:

/h Print a summary the most current set of command-line options.
/c Set 43-line (EGA) or 50-line (VGA) mode. (If you need more lines than that, see TDL.INI for VESA options.)
/r Instructs TDL that it resides on read-only media (ie. CDROM or DVDROM) and that it should not try to write anything to its local filesystem. This disables "favorites" as well as writing the debug log to disk.
/d Print excessive debugging messages during initialization. Used for troubleshooting only.
/f Always use fast display routines on all CGA systems. This may cause "snow" or display corruption on true CGA adapters.

TDL uses a "handlers" system to determine what to do with a file when the user requests lauching it. When a file is selected, TDL looks in HANDLERS.INI to determine what should be done with that particular file.

You probably won't need to touch HANDLERS.INI. Out of the box, it is configured to do the following:

  • Launch .EXE or .COM files
  • Decompress .ZIP and .ARC files, and launch programs inside them
  • Run BASIC .BAS files with GWBASIC or BASICA
  • Write raw image formats (.360, .720, etc.) to a blank floppy in drive A:
  • Display .TXT and .NFO files

If you'd like to configure TDL to handle something less common, such as decompressing uncommon file types (.ARJ, etc.), viewing pictures, etc., then you'll need to add their file extensions and associated utility programs to HANDLERS.INI. Consult HANDLERS.INI itself for documentation.

The author welcomes contributions and enhancements, especially in the form of the python indexer. Quick cheat-sheet for those who have never contributed to a github open-source project before:

  1. Fork it!
  2. Create your feature branch: git checkout -b my-new-feature
  3. Commit your changes: git commit -am 'Add some feature'
  4. Push to the branch: git push origin my-new-feature
  5. Submit a pull request

This guide may be helpful: https://akrabat.com/the-beginners-guide-to-contributing-to-a-github-project/

The following constraints are in place:

  • Any python code must be 3.x, as the indexer already uses some 3.6+ features.
  • The DOS launcher must be able to run on an 8088 system with MDA or better video

If your new feature is optional and won't break the above constraints (for example, you want to add mouse support to the DOS launcher), that's fine. Any pull request that breaks the above constraints will not be accepted.

If you want to add a feature that breaks compatibility with older systems, check with me before working on it, as there is likely a way to implement what you want while still staying compatible with the 8088.

Building the TDL is not required to use it! This section is only for those who want to hack on the code and contribute back to the project -- however, be prepared to get (re)acquainted with DOS compilers and tools!

TDL is written in Turbo Pascal 7.0, with a small amount of assembler thrown in for speed or utility. Knowledge of Pascal is required to extend TDL. Knowledge of assembler is helpful, but not required.

TDL is not 100% self-contained; it uses some support libraries and units to provide functionality like CUI/TUI primitives, userspace swapping, and stream extensions. Ensure you have both https://github.com/MobyGamer/TPLibs and https://github.com/MobyGamer/UNITS available in your source path.

Borland Pascal 7.0, which includes both Turbo Pascal as well as Turbo Assembler/linker/debugger, is available via your favorite search engine. A full installation of it is rumored to be included in ftp://ftp.oldskool.org/pub/misc/xtfiles.rar but this is unconfirmed.

You must always ensure that the code you write will execute on any x86 system, including the 8088. Don't use 80186+ instructions such as PUSHA, POPA, ENTER, LEAVE, etc. In Turbo Pascal, always ensure $G-,N-,E- to turn off 80286 code generation, 8087 code generation, and 8087 emulation respectively. One of TDL's design goals is the ability to work on any IBM PC or compatible.

Can I use this with emulators such as DOSBox? Yes, but if you are using an emulator, there are much better launchers and front-ends you can use, such as Metropolis Launcher . TDL was developed to solve issues specific to running large archives of software directly on vintage computers, and as such, doesn't have as many features as modern emulator front-ends.

Where can I find collections of DOS games to run on my vintage system? Any internet search can help you. As of this writing, "DOS game collection" produced 3.2 million hits in google. If you'd like to support commercial entities that legally sell vintage games, some choice exists, with Good Old Games <http://www.gog.com/> being the most popular as of 2024.

I'm using TDL with DOSBOX and it won't unzip some of the larger games, claiming there is not enough free space in the cache to extract them. Some DOSBOX variants default to limiting the amount of free space to 16MB regardless of how much is actually free. To get around this, mount the drive with the option " -freesize [size]". For example:

mount C C:\dosgames -freesize 1024

Why was this written in Pascal and assembler, instead of something more popular like C? The principle developer of the TDL prefers the Turbo Pascal 7 IDE when writing code on, and for, 8088-based systems. The TP7 IDE is a powerful development environment that allows an 8088-based IBM PC with 640KB to perform symbolic debugging with conditional breakpoints, watch/inspect/change variables at runtime, and watch CPU registers change line by line, all without leaving the IDE. Also, TP7 makes it easy to speed up sections by either writing in-line assembler directly in the pascal source, or linking to external assembler objects (which can also be traced and debugged within the IDE, with the same features previously listed).

Turbo Pascal 7 isn't free; will you switch to FreePascal at some point? The formal commit of 8086 code generation in FreePascal in 2017 now makes this possible, so it is conceivable the project will move to FreePascal once all proposed features have been added and the codebase is frozen.

Emulators are much easier to use than maintaining original hardware. Why not just use emulators? Both hardware and emulators are useful for running programs for which the hardware environments are no longer sold or maintained. Emulators are unparalleled for their accessibility. But, as good as emulators are, the only way to truly research a historical work is to experience it on the hardware that work targeted.

About

A system for easily loading and running thousands of DOS programs on vintage hardware

Resources

License

Code of conduct

Stars

Watchers

Forks

Packages

No packages published